Avg. Rating:
Write a Review
Type:Gantry Machining Centers (incld. Bridge & Double Column)
Price:Contact Sales Rep.


X:51.18 "
Y:43.31 "
Z:19.69 "
Power:10.1 hp
RPM:8000 rpm
# ATC:24
Table-W:31.5 "
Table-L:51.18 "
Control:CNC (Mitsubishi M70A)
Dimensions:3400*2400*3000 mm
Weight:7500 kg

Product Overview

1.Machine structure

Fixed dual column type gantry CNC machining center,the worktable strokes along with X axial motion,the spindle travels horizontally along with Y axis on the beam,and elevates vertically along with Z axis.

The machine units and key parts are rigid resin iron casting,had been through aging treatment,eliminated the inner stress to ensure the structure durable and stable.

2.Axial drive and transmission

All axes’ linear motion driven by AC servo motors with ball-screws and linear guides.

The linear guides were milled and grinding accurately,attached with low friction factor TURCITE-B wear plate,effectively improves the movement features and the required contact rigidity of cutting.

Power failure safety of Z axis would brake the spindle motor automatically to prevent damage in case of the sudden power failure.


Through two steps gear variable speed,enlarged the speed range of the AC servo motor of the spindle,to realize the heavy duty cutting and milling with low speed and high torque.

Angular contact ball bearings endures strong axial force,the constant temperature recycle system of the bearing as the coolant unit makes the spindle a lasting high accuracy and longer life.

4.Tools magazine

Installed on the side of column,with rapid and accurate tools changing.

5.Coolant system

Equipped with coolant pump and fluid tank,cool down the workpiece and cutting tools by several flushing nozzles.

6.Pneumatic system

Used for spindle center blasting,tools and tools holders exchange.

7.Safety guard

All linear guide and ball-screws covered with elastic metal guards, the whole machine protected with complete closed type splash guard.


Greasing lubrication on all axes and automatic lubrication system on all ball-screws and linear guides.


Chips flushed by the cooling oil and drop on the spiral conveyor in the bottom inside,then transferred to the chips carriage outside.

10.CNC controller

Standard CNC controller we configured with Mitsubishi M70A, the others like Fanuc i0 mate model d are optional.

TAICNC Limited

About TAICNC Limited

TAICNC 's founders engaged in the industry of computerized numerical control machine since 1986,we established the company in 2006,which is committed to supply quality EDM machine, from China to the worldwide. Our essential business are, Manufacturing & Trading Vertical Machining Center Multiple cutting molybdenum wire cut EDM machine High speed small hole-driller EDM machine Precise sinker EDM machine Surface grinding machine CNC turning machine Engraving Machine Deep Hole Drill Machine At early years, we are a good reputed distributor of EDM machines in China,every vendor had to pass a rigorous selection process to be our regular suppliers. We realized it hard to control the cost and some tiny requirements to stand in clients' shoes ,so we pick the most valuable ones among those regulars and cooperate with them,continuously designs and introduces new products. With tremendous efforts and constant development, we had built a modernized factory in 2009, there are a number of internationally advanced technology processing equipments, quality control equipments and experienced & skilled workforces. Our annual output of various EDM machines reach to 1000 thousand pieces . The strict product designing, assembly and testing process ensure superior manufacturing capability, stable and reliable product quality. In the meanwhile, we set up branches and enlisted distributors in the domestic market, to expand our business. Those branches and distributors feedback us the popularity of the products and the trends of the market which helps us to improve the product and service better.


Looking to Purchase a New TAICNC LM1300?