Avg. Rating:
Write a Review
Type:Cylindrical Grinders Including Plain & Angle Head
Price:Contact Sales Rep.


Swing:16.54 "
Centers:39.37 "
Grinding Wheel Dia.:15.94 "
Wheel RPM:1783 rpm

Product Overview

能力 Capacity
工作台最大旋徑 Swing Over Table Ø420 mm
兩頂心間最大距離 Distance Between Centers 1000 mm
最大研磨直徑 Max. Grinding Diameter 400 mm
兩頂心間最大承受重量 Max. Load Held Between Centers 150 kg
砂輪 Wheel
外徑 x 寬 x 內徑 OD x Width x ID Ø405 x 50 x Ø127 mm
週速度 Linear Velocity 30 m/s
轉速 Speed 1783rpm
砂輪軸座 Wheelhead
快移速度 Rapid Feedrate 6m/min
最小設定值 Min. Input Increment 0.001 mm(0.0001 mm)
內徑研磨 Inemal Grinding 手動 Manual Elevation
工作台 Table
快移速度 Rapid Feedrate 6m/min
最小設定值 Min. Input Increment 0.001 mm(0.0001 mm)
旋轉角度 Swiveling Angle 0° ~ 10°
工作主軸頭 Workhead
旋轉角度 Swiveling Angle -30°~+90° deg
頂針斜度 Center MT. No. 4
主軸轉速 Speed 10-300rpm
工作主軸負荷(含夾具) Max. Load of Spindle(tool holder included) 35kg(最長長度Max : L150 mm)
尾座 Tailstock
頂針斜度 Center MT. No. 4
尾座軸移動距離 Tailstock Stroke 25 mm
控制電源 Power Source
Fanuc 系統(Fanuc System) 電源Power : : 220V 控制迴路Cont. Cir.24VDC
馬達 Drive Motors
砂輪軸 Wheel spindle 3.7(4P) kw
工作主軸 Work Spindle 1.3 kw (AC 伺服 Servo motor)
砂輪軸座進給 Wheelhead Feed 1.2kw (AC 伺服 Servo motor)
工作台進給 Table Feed 1.8kw (AC 伺服 Servo motor)
油壓泵浦 Hydraulic Pump 0.75(6P)kw
砂輪軸潤滑泵浦 Wheel Spindle Lubricant 0.18(2P)kw
研削液泵浦 Coolant Pump 0.18(4P)kw
內研主軸 Inemal Grinding Wheel Spindle 0.75(2P)kw
容器容量 Tank Capacties
砂輪軸潤滑油箱 Wheel Spindle Bearing Lubricant 18L
潤滑油箱 Lubrication Oil Tank 60L
機器重量 Machine Weight 4300 kg

Top King Technology Co., Ltd

About Top King Technology Co., Ltd

Top King Technology Co., Ltd. (TKTC) is founded in 2007. In 2008, TKTC moved to new facility in Industry Park locate in Taiping City. TKTC builds Five Departments and a project coordinator’s auxiliary to service correspondents in the world. TKTC has focused in grinder, Lapping & Polish technology solution providing. Additional, supporting form Industrial Technology Research Institute (ITRI)*, Precision Machinery research Development Center (PMC), Taiwanese University and Palmary Machinery Group. We create values for our customers, made benefit for our users. TKTC’s engineers are graduated graduate school or university, college. They are major in Machine or Electrical or Information Technology. They service excellence engineering design, quality engineering design and proof. In production, all engineering technicians are 5 to 10 years experience in assemble machine. They are under in good knowledge and sense to build qualified machines. Our quality assurance system, runs from initial design, to supplier auditing, IQC, IPQC, FQC (Semi product, Assembled component), OQC (before delivery) and Install Quality Accepted. Continue improve our machines made friendly and safety machine, and provides full solutions. Past three years, TKTC sold out machines and service solution into Taiwan, China, Vietnam, Brazil, Thailand etc. area and countries.


Looking to Purchase a New TOPKING OGC-1640?

Begin the purchasing process using Take the next step, Contact Sales Rep.