TORGIM 310/360 is a series of modern machines characterized by the use of electromagnetic clutches in the head and in the apron that permit to eliminate the feed inserction levers obtaining a perfect operative functionality and in such a way simplifying the operator movements. It’s the perfect machine for manual turning in very quick time.
The pushbutton board, placed on the right side of the carriage, allows easy operation of the machine and gives to the operator full control over the main movements of the machine. The control devices are the following: Joystick for spindle rotations in both directions – Joystick for on/off feeds and rapid movements in all the directions of carriage and transversal slide. A logic electric circuit assures that the selector never misses the feed sense – Luminous push button to release automatic longitudinal stop – Safety stop push button – Selector to drive small pulsing rotations of the spindle
centres height 310/360 mm
turning diametre on carriage up to 500 mm
spindle bore 133 mm
distance between centres up to 6000 mm
Torgim is a company constituted by mr. paolo giana in 1966 to produce centre lathes with covered guides and a natural gap that permits to reach big diametres under head, without any reorganization of the machine and, so on, increasing it’s versatility.
during the years, to reply to the requirements of an ever-growing and varied clienteles, the production was widened up to cover the whole range of conventional centre lathes with height of centres over bed from 230 to 500 mm.
the innovative spirits of our firm and the growing demand of cnc simplified machines that don't involve high programming abilities, has successively brought to the construction of self-learning centre lathes (also called teach-in lathes), conceived to optimize the work’s capacities of the traditional single pulley lathes operators allowing them to carry out pieces with complex shapes assuring, the quality and precision of a cnc machine and the utilization facility of a traditional machine.
besides the torgim firm has a very wide machines park in continuous renovation that allows to satisfy the jobbing demands particularly for operations with the horizontal grinding of medium and great dimensions.
the torgim firm has to its disposal a factory of great dimensions that facilitates the motion and machining of pieces with notable volumetric overall dimensions.