BERTSCHE IJET
The machine tool quality Bertsche iJET provides both powered and mechanical rotary deburring and high pressure water deburring (HPWD) in the same machine. Multiple parts and part features can be p...
EMAG PECM PT
In addition to the PTS series, EMAG offers the PT series with the following advantages: »»Machine base made of Mine raliT® polymer concrete »» Clamping surface: 800 x 450 x 660 mm (W x D x H) »»Mac...
EMAG PO 100 SF
This technology is a targeted refinement of the ECM process, where the gap between the workpiece and the tool through which the electrolyte solution flows is especially narrow. Simultaneously, the ...
EMAG PO 900 BF
EMAG ECM has two machine types for the different machining tasks of jet engine and turbine production: while the small PO 100 SF model is designed for machining turbine blades, the larger PO 900 B ...
EMAG PT 4000-3
Based on the PT system, the PT 4000-3 is fitted with an additional XY table. »» X-, Y- and Z-axes »» Clamping surface: 700 x 600 x 800 mm (W x D x H) »»Machining area size 1,900 x 2,000 mm (W x D) ...
EMAG PTS 2500
The EMAG PTS 2500 enables the highly precise integration of demanding geometries. The EMAG ECM and PECM technology applied here is an excellent option, even if many developers and design engineers ...
PILLER DOUBLE CHAMBER
Alternation between loading and working chambers, simple operation, robust workhorse for simple components with medium to large quantities.
PILLER JETBOOSTER
Separate high pressure generation for water or cutting oils in the pressure range from 400 to 1100 bar, also for difficult placements. Integrated filter systems according to component requirements ...
PILLER MULTIJET
Machining center based on the rotary indexing principle. Vertical or horizontal nozzle arrangement. The machine offers both manual and automated loading, which means it offers fast cycle times for ...
PILLER ROBOJET
Complete machining center with integrated handling system in a lightweight design. Cartesian surface portal for the integration of dirty and clean tape or peripheral systems such as component label...
PILLER ROBOJET TWIN
Complete machining center with integrated handling system in a lightweight design. Linear portal for the integration of dirty and clean belt. Modifies an infeed and outfeed conveyor. The component ...
PILLER VECTORJET II
Vertical machining center with turntable (B-axis) for workpiece including clamping, nozzle equipment according to application requirements, if necessary, automatic side loading. Easy replacement of...
PILLER VECTORJET III
Larger horizontal machining center with fast swivel table and bulkhead. There are two turntables (B-axes) on the swivel table, which are separated by the central wall. This creates a division into ...
PILLER VECTORJET IV LINE
NC water jet center with double chamber principle for the reciprocal machining of camshafts. In this special case, the machining is done with cutting oil, but can easily be switched to water. The s...
PROCECO ACCU-JET
The PROCECO Accu-Jet® is a 5-axis, CNC controlled, hydro-deburring machine tool designed to flush and deburr precision metal or plastic parts. At the heart of the Accu-Jet® is a 4-axis, CNC contro...