WIM DFM1007-75S
WIM DFM0806-50S
WETORI IDS-50/75-1008
Especially for the mold correcting operation of the related press dies, such as plastic synthetic die, diecast die and so on. To save time for operators, relieve operators from tension and tire, pu...
SXKH HMG-70JM TWOWAY
SXKH HMG-70JM ONEWAY
SXKH HMG-70ES TWOWAY
SXKH HMG-70ES ONEWAY
SXKH HMG-60BA1
REIS TUS115A/40HK
REIS TUS-90A
REIS TUS-90
REIS TUS 90 OK 100
REIS TUS 90 OK
REIS TUS 115-40
REIS TI-15-40
REIS T115-100
REIS 115A50-11
REIS 115A/40/HK
REIS 115A-100K
MILLUTENSIL MIL 162
The MIL series version for medium size moulds The press is produced in two models, MIL 162 – MIL 163, which differ in performance. The press is available only in floor version. Both models are equ...
MILLUTENSIL MIL 143
The MIL series version for medium size moulds The press is produced in two models, MIL 142 – MIL 143, which differ in performance. The press is available only in floor version. Both models are equ...
MILLUTENSIL MIL 142
The MIL series version for medium size moulds The press is produced in two models, MIL 142 – MIL 143, which differ in performance. The press is available only in floor version. Both models are equ...
MILLUTENSIL MIL 123
The smallest version of the MIL series The press is produced in two models, MIL 122 – MIL 123, which differ in performance. The press is available only in floor version. Both models are equipped w...
MILLUTENSIL MIL 122
The smallest version of the MIL series The press is produced in two models, MIL 122 – MIL 123, which differ in performance. The press is available only in floor version. Both models are equipped w...
MILLUTENSIL BV 30E-RG
For U.S. customers: Millutensil, manufacturer of spotting presses, will be bringing their BV30E-RG model to Amerimold in 2016. For validating and handling molds up to 1500mm x 1000mm in size, this...
MILLUTENSIL BV 30E-R
MILLUTENSIL BV 30E
Advanced-version for small and medium size moulds. BV 30 E is the advanced version with a hydraulic system controlled by electronic servo proportional valves and a control of parallelism through H...
MILLUTENSIL BV 28E-RG
MILLUTENSIL BV 28E-R
MILLUTENSIL BV 28E-G
MILLUTENSIL BV 28E
Advanced-version for small and medium size moulds. BV 28 E is the advanced version with a hydraulic system controlled by electronic servo proportional valves and a control of parallelism through H...
MILLUTENSIL BV 26E-R
MILLUTENSIL BV 26E
Entry level-version for small and medium size moulds. BV 26 E is the advanced version with a hydraulic system controlled by electronic servo proportional valves and a control of parallelism throug...
MILLUTENSIL BV 26C
Entry level-version for small and medium size moulds. The BV 26 C is the entry level version of the Millutensil’s spotting presses. The control panel of the BV 26 C is equipped with user-friendly ...
MILLUTENSIL BV 25P
The smallest version of the BV series The BV 25 P is the smallest version of the Millutensil’s spotting presses. Platen dimensions are 770×660 mm (31X25 inches). The max. clamping force is 180kN. ...
HIM HDS-100
HIM HDS-050
HIM HDS-030
HANSFORD 1018
ELECTROPNEUMATICS 4-PILLAR 15T
DEES HD-100
SPC die spotting press is a precision tool for the die maker at the final stage of molding which requires high precision hydraulic press to further increase production efficiency and quality. Our m...
