AKYAPAK BMB
The AKYAPAK BMB product line is designed with high precision technology to bend or curve the edges of plates into a rim or flange. Carefully designed to provide the lowest possible vibration and ex...
BLUE VALLEY #3
BLUE VALLEY #4
BLUE VALLEY #6
BLUE VALLEY #8
BLUE VALLEY #9
CALFRAN RC-3006
CROSS ITALIA MAX T
CROSS ITALIA T20K
This cutting-off machine is used to cut: pins, ejectors, screws, punches, keys in a fast and precise way.
CROSS ITALIA T20X
The cutting-off and flanging machine T20X is used to cut ejectors and to rectify their frontal part. This machine is equipped with a fixed wheel and a disc coaxially mounted and a tilting clamp wit...
DANILUK PD 18 100
DANILUK PD 18 125
DANILUK PD 18 180
ECKOLD MKF 130/16
ECKOLD MKF 140/32
ECKOLD MZ 20
ECKOLD MZ 30
FLAGLER 16
FLAGLER 18
FLAGLER 20
FLAGLER HAND
The Flagler Hand Flanger turns a 7/32" high flange on inside or outside radii as small as 1 3/4". Releasing top roll for the removal of a closed flange. This unit clamps to any shop bench and can b...
LOCKFORMER AUTO-GUIDE FLANGER 16
These ductwork prep machines automatically follow any edge – curved or straight. Use the convenient table slot to turn up a "starting flange" and let it go! A calibrated dial can be set for radii a...
LOCKFORMER BUTTON PUNCH SNAP-LOCK
Roll single-direction curves down to a minimum radius of 3-1/2” inside or a 5” outside radius, almost automatically. These punched right-angle flanged curves fit perfectly in the receiver formed on...
LOCKFORMER EASY EDGER
Turn perfect flanges on elbows or other curved fittings as fast as you can notch them. No gauge to set. Hand clamps to my bench. 20 gauge maximum.
MORLIN 1300
PHI M343
A complete tooling change can be performed in just minutes. Once the pipe is in place, the flange is formed in minutes. The whole operation — install tooling (if required), insert pipe, form the fl...
PHI M369
A complete tooling change can be performed in just minutes. Once the pipe is in place, the flange is formed in minutes. The whole operation — install tooling (if required), insert pipe, form the fl...
RAMS 2002
This unit is designed for forming a 7/32" right angle flange, for both inside and outside radiuses. This unit can also be used on duct elbows as well. The unique design features Torrington Needle B...
RAMS 2003
RAMS 2007
This unit comes mounted in a heavy duty cabinet. The RAMS-2007 Power Flanger will form a 7/32" right angle flange on either straight or curved pieces. It has an adjustable "auto guide" which can be...
RAMS 2007-AA
RAMS-2007-AA: This unit comes mounted in a heavy duty cabinet. The RAMS-2007-AA Power Flanger will form a 7/32" right angle flange on either straight or curved pieces. The Auto Adjust feature self ...
RAMS 2008
RAS 21.20
The RAS 21.20 flanging machine turns up 90 degree flanges on radius cheeks so that the parts are ready for Pittsburgh or Snaplock joints. Quick, Safe, Cost efficient. The operation speed is variab...
SWAH FLANGING MACHINE
T-DRILL F-200
TIN KNOCKER 16
A perfect partner for the TK 16-gauge Pittsburg Roll Former Puts a 3/8″ outside flange on straight or curved sheet metal edges Puts a flange on material with a diameter of as little as 2″
TIN KNOCKER 20
This power flanger has the “auto-guide” feature, which automatically controls the forming of a right-angle flange. It will contour and follow any edge, straight or curved. Using the convenient tab...
TIN KNOCKER MANUAL FLANGER
Puts 7/32" flange on elbows and other radius fittings. Bench mounted, there is no gauge to set, and requires no special tools. Makes for EASY EDGING.
TRI-TOOL 442F
Cutting capacities: 14.0" (355.6mm) ID through 42.0" (1066.8mm) OD with Standard Tool Bar and Mounting Head Kit. The Extended Tool Bar and Mounting Head Extension Kit brings the cutting capacity to...