New Grinding Fixtures (24)
New Models (24)
Displaying 24 Models
thumb

CONTROL GAGING 401E

The Model 401E and 401EX caliper-style swingdown' gages provide automatic grinder control based on real-time workpiece size. Applications range from the simplest, least expensive single diameter gr...

1 photo
Brochure
thumb

CONTROL GAGING 401EX

The Model 401E and 401EX caliper-style swingdown' gages provide automatic grinder control based on real-time workpiece size. Applications range from the simplest, least expensive single diameter gr...

1 photo
Brochure
thumb

CONTROL GAGING 88M

The latest refinement of Control Gaging's classic quick-setup, thru-spindle gage head is the Model 88M. "Durability" means more to us than the proven ruggedness of our gages in the field: it also m...

1 photo
Brochure
thumb

CONTROL GAGING DD5

Reduce operator intervention, decrease size variation, and improve grinding machine throughput with this fullyautomated, statistics-driven gaging system. Control Gaging's DD5 Gaging Station provid...

1 photo
Brochure
thumb

CONTROL GAGING DDP

The DDP concept is simple: a circular, spring-loaded gaging shoe presses the ground part against a precise reference surface. The gage contacts the back of the shoe, sending the measured thickness ...

1 photo
Brochure
thumb

CONTROL GAGING GRIP-GAGE-GO

The Grip-Gage-Go approach from Control Gaging Inc. supports the goal of designing out all unnecessary space, time or motion in manufacturing systems. Grip-Gage-Go can eliminate the extra loader mot...

1 photo
Brochure
thumb

CONTROL GAGING PT1

The PT1 In-line Gage is a unique solution to a difficult problem - how to automate size control on automotive transmission spools and similar small, multi-diameter parts. The PT1 provides the accur...

1 photo
Brochure
thumb

CONTROL GAGING SHAFT GAGE

Control Gaging has developed flexible fixture designs that make purchasing a post-gage for infeed centerless shaft grinding simple and affordable. If one of our "standard" designs does not fit your...

1 photo
Brochure
thumb

CONTROL GAGING TF1

The TF1 and TF2 are general purpose gage fixtures that adapt to almost any thrufeed centerless grinder. The gage fixture mounts to the exit workrest of the grinder and feeds part measurement data t...

1 photo
Brochure
thumb

CONTROL GAGING TF2

The TF1 and TF2 are general purpose gage fixtures that adapt to almost any thrufeed centerless grinder. The gage fixture mounts to the exit workrest of the grinder and feeds part measurement data t...

1 photo
Brochure
thumb

CONTROL GAGING TFD

Effective automation of size control on a thrufeed centerless grinder requires precise part measurement, responsive trend analysis, and an effective compensation technique for the grinder. Each of ...

1 photo
Brochure
thumb

CONTROL GAGING TFD-24

Effective automation of size control on a thrufeed centerless grinder requires precise part measurement, responsive trend analysis, and an effective compensation technique for the grinder. Each of ...

1 photo
Brochure
thumb

CONTROL GAGING TFN

The TFN is a high-accuracy dynamic gage fixture designed to measure parts at the small end of the thrufeed grinding range. The design appears simple, but the geometry has been diligently refined to...

1 photo
Brochure
thumb

CONTROL GAGING THRU FEED RING GAGE

The application of closed-loop gaging to thrufeed ring grinding has long been difficult because of the high rate of production and the high precision required.Control Gaging has broken both of thes...

1 photo
Brochure
thumb

CONTROL GAGING WG1

For more than 40years Control Gaging Inc. has been putting its single-finger gage heads on some of the toughest applications that manufacturing plants can offer. In a corner of one plant there is ...

1 photo
Brochure
thumb

CONTROL GAGING WG2

Control Gaging invented the "quick setup" gage head more than 30 years ago, slashing gage changeover time from 20 minutes to 30 seconds. Some of the gages built then are still holding close toleran...

1 photo
Brochure
thumb

CONTROL GAGING WHEEL POSITION

Measuring the surface of grinding wheels can effectively control part size and grind-line on disc grinders. On disc grinders, direct in-process part measurement can sometimes be extremely difficul...

1 photo
Brochure
thumb

UNISON C

The Model C Fixture is used for throughfeed, infeed and secondary op- erations and has a 4” wide regulating wheel.

1 photo
Brochure
thumb

UNISON C6

The Model C6 Fixture is built to handle longer parts and is used for throughfeed, infeed and secondary operations equipped with a 6” wide regulating roll.

1 photo
Brochure
thumb

UNISON IGF

Our IGF Unit is designed for appli- cations that require grinding the ID of parts closely concentric to the OD. Since concentricity tolerance of 0.000050” to 0.0001” have al- ways been difficult to...

1 photo
Brochure
thumb

UNISON PGF

Model PGF Fixture is used for infeed and secondary operations of parts which have multiple diameters, gears, splines, etc. that require a relieved regulating roll, blade, etc. The Model PGF allows ...

1 photo
Brochure