New Horizontal Machining Centers (32)
New Models (32)
Contact SW
Displaying 32 Models
thumb

SW BA 222

Machining small workpieces with two spindles The two-spindle BA 222 machining center with working area dimensions of 200 x 350 x 300 mm per spindle is setting new standards for 4 and 5-axis machin...

X:7.874 in
Y:13.78 in
Z:11.81 in
1 photo
thumb

SW BA 311

With the new BA 3 series, development continues. Monobloc design is combined with a 3-axis unit, a double swivel table, and 2 or 4 horizontal spindles with a spindle distance of 300 and 150 mm resp...

X:21.65 in
Y:19.69 in
Z:14.76 in
1 photo
thumb

SW BA 312

With the new BA 3 series, development continues. Monobloc design is combined with a 3-axis unit, a double swivel table, and 2 or 4 horizontal spindles with a spindle distance of 300 and 150 mm resp...

X:21.65 in
Y:17.72 in
Z:14.76 in
1 photo
thumb

SW BA 321

With the new BA 3 series, development continues. Monobloc design is combined with a 3-axis unit, a double swivel table, and 2 or 4 horizontal spindles with a spindle distance of 300 and 150 mm resp...

X:11.81 in
Y:19.69 in
Z:14.76 in
1 photo
Brochure
thumb

SW BA 322

With the new BA 3 series, development continues. Monobloc design is combined with a 3-axis unit, a double swivel table, and 2 or 4 horizontal spindles with a spindle distance of 300 and 150 mm resp...

X:11.81 in
Y:17.72 in
Z:14.76 in
1 photo
Brochure
thumb

SW BA 341

With the new BA 3 series, development continues. Monobloc design is combined with a 3-axis unit, a double swivel table, and 2 or 4 horizontal spindles with a spindle distance of 300 and 150 mm resp...

X:5.906 in
Y:19.69 in
Z:14.76 in
1 photo
Brochure
thumb

SW BA 342

With the new BA 3 series, development continues. Monobloc design is combined with a 3-axis unit, a double swivel table, and 2 or 4 horizontal spindles with a spindle distance of 300 and 150 mm resp...

X:5.906 in
Y:17.72 in
Z:14.76 in
1 photo
Brochure
thumb

SW BA 422

Taking what is great and making it even better is a never-ending pursuit, even when concerned about eclipsing the already proven and successful. The BA 400 set a trend that is continued by the BA 4...

X:15.75 in
Y:19.69 in
Z:16.73 in
1 photo
Video
Brochure
thumb

SW BA 422 BLOCK

Taking what is great and making it even better is a never-ending pursuit, even when concerned about eclipsing the already proven and successful. The BA 400 set a trend that is continued by the BA 4...

X:15.75 in
Y:19.69 in
Z:16.73 in
1 photo
Video
Brochure
thumb

SW BA 442

Taking what is great and making it even better is a never-ending pursuit, even when concerned about eclipsing the already proven and successful. The BA 400 set a trend that is continued by the BA 4...

X:7.874 in
Y:19.69 in
Z:16.73 in
1 photo
Video
Brochure
thumb

SW BA 622

The BA 622 opens up new dimensions in produc- tivity for OEMs in highly dynamic 4- and 5-axis machining of steel and cast components in the 600 mm range. Compared to the previous series BA 600, als...

X:23.62 in
Y:23.62 in
Z:19.69 in
1 photo
Brochure
thumb

SW BA 622 BLOCK

The BA 622 opens up new dimensions in produc- tivity for OEMs in highly dynamic 4- and 5-axis machining of steel and cast components in the 600 mm range. Compared to the previous series BA 600, als...

X:23.62 in
Y:23.62 in
Z:19.69 in
1 photo
Brochure
thumb

SW BA 642

The BA 6 opens up new dimensions in produc- tivity for OEMs in highly dynamic 4- and 5-axis machining of steel and cast components in the 600 mm range. Compared to the previous series BA 600, the n...

X:11.81 in
Y:23.62 in
Z:19.69 in
1 photo
thumb

SW BA 722

Bigger, stronger, faster, and more energy efficient – these were the main targets we set during the development of the new 7 series. Bigger in terms of spindle distance (700 mm) and work area; stro...

X:25.59 in
Y:25.59 in
Z:21.65 in
1 photo
Video
Brochure
thumb

SW BA 722 BLOCK

Bigger, stronger, faster, and more energy efficient – these were the main targets we set during the development of the new 7 series. Bigger in terms of spindle distance (700 mm) and work area; stro...

X:25.59 in
Y:25.59 in
Z:21.65 in
1 photo
thumb

SW BA 732

Bigger, stronger, faster, and more energy efficient – these were the main targets we set during the development of the new 7 series. Bigger in terms of spindle distance (700 mm) and work area; stro...

X:17.72 in
Y:25.59 in
Z:21.65 in
1 photo
Brochure
thumb

SW BA 742

Bigger, stronger, faster, and more energy efficient – these were the main targets we set during the development of the new 7 series. Bigger in terms of spindle distance (700 mm) and work area; stro...

X:13.78 in
Y:25.59 in
Z:21.65 in
1 photo
Brochure
thumb

SW BA ONE8

For the rare cases where single- spindle pre- or post-machining is indispensable, SW has the solution: the BA one8. Just like the BA one6, the BA one8 is designed for perfect integration into your ...

X:31.5 in
Y:39.37 in
Z:25.59 in
1 photo
thumb

SW BA W02-22

Precision and maximum dynamics for economical freeform surface machining are the special domain of the new BA W02. The machining center is setting new standards in 5-axis machining with linear and ...

X:7.874 in
Y:13.78 in
Z:11.81 in
1 photo
thumb

SW BA W04-22

If you are searching for the optimal MC for machining aluminium parts, look no further. The W04 – with direct drive technology in all axes – is equipped with linear motors in the X-, Y- and Z-axes,...

X:15.75 in
Y:19.69 in
Z:16.73 in
1 photo
Brochure
thumb

SW BA W04-22 BLOCK

If you are searching for the optimal MC for machining aluminium parts, look no further. The W04 – with direct drive technology in all axes – is equipped with linear motors in the X-, Y- and Z-axes,...

X:15.75 in
Y:19.69 in
Z:16.73 in
1 photo
Brochure
thumb

SW BA W04-42

If you are searching for the optimal MC for machining aluminium parts, look no further. The W04 – with direct drive technology in all axes – is equipped with linear motors in the X-, Y- and Z-axes,...

X:7.874 in
Y:19.69 in
Z:16.73 in
1 photo
Brochure
thumb

SW BA W06-12

Do you machine large aluminium workpieces such as gearbox housings or bedplates? Are they around 600 mm long? Is a large proportion of your cycle times due to non-productive times? The BA W06 – wit...

X:45.28 in
Y:23.62 in
Z:19.69 in
1 photo
Brochure
thumb

SW BA W06-1W

The BA W06-W, BA W06, and BA W04 are among the quickest machining centers available on the market. The BA W06-2W, with independent Z-axes and an integrated loading unit, is equipped for workpiece p...

X:23.62 in
Y:23.62 in
Z:19.69 in
1 photo
Brochure
thumb

SW BA W06-22

Do you machine large aluminium workpieces such as gearbox housings or bedplates? Are they around 600 mm long? Is a large proportion of your cycle times due to non-productive times? The BA W06 – wit...

X:23.62 in
Y:23.62 in
Z:19.69 in
1 photo
Brochure
thumb

SW BA W06-2W

The BA W06-W, BA W06, and BA W04 are among the quickest machining centers available on the market. The BA W06-2W, with independent Z-axes and an integrated loading unit, is equipped for workpiece p...

X:23.62 in
Y:23.62 in
Z:19.69 in
1 photo
Brochure
thumb

SW BA W06-32

Do you machine large aluminium workpieces such as gearbox housings or bedplates? Are they around 600 mm long? Is a large proportion of your cycle times due to non-productive times? The BA W06 – wit...

X:45.28 in
Y:23.62 in
Z:19.69 in
1 photo
thumb

SW BA W06-42

Do you machine large aluminium workpieces such as gearbox housings or bedplates? Are they around 600 mm long? Is a large proportion of your cycle times due to non-productive times? The BA W06 – wit...

X:11.81 in
Y:23.62 in
Z:19.69 in
1 photo
Brochure
thumb

SW BA W08-12

Brand new, extremely fast, and future-oriented. Do you still produce large, light metal workpieces such as 8-speed gearbox housings on single-spindle machines? That era is over. The market is progr...

X:59.06 in
Y:35.43 in
Z:25.59 in
1 photo
thumb

SW BA W08-22

Brand new, extremely fast, and future-oriented. Do you still produce large, light metal workpieces such as 8-speed gearbox housings on single-spindle machines? That era is over. The market is progr...

X:31.5 in
Y:35.43 in
Z:25.59 in
1 photo
Brochure
thumb

SW BM 1250

Why use a rotary dial machine when you can have multiple spindle heads mounted in a monobloc? In the BM 1250, the fixtures holding the parts travel to the tools as with a pick-up machine. This make...

X:74.8 in
Y:49.21 in
Z:19.69 in
1 photo
Video
Brochure
thumb

SW BX 621

Robust, cost-effective and innovative: the twin-spindle, single-table BX 621, featuring the patented mono-wall design. Specially developed for this machining center, the mono-wall provides closed ...

X:23.62 in
Y:20.67 in
Z:15.75 in
1 photo
Video
Brochure