New Horizontal Machining Centers (64)
New Models (64)
1 - 50 of 64 Models
thumb

AKIRA SEIKI H3XP

Features : Table 320mm Compact horizontal machine working with fast twin pallet. (OPT: 6 pallets) Combining the advantages of compact floor size and time saving while waiting for machine to stop t...

X:13.8 in
Y:15.7 in
Z:13.8 in
2 photos
Video
thumb

AMADA THV-430

X:16.929 in
Y:16.929 in
Z:5.906 in
1 photo
thumb

AMS CMH 400

X:23.62 in
Y:19.69 in
Z:19.69 in
1 photo
thumb

AMS CMH 400 XL

X:23.62 in
Y:19.69 in
Z:19.69 in
1 photo
thumb

AMS FIER H

X:19.69 in
Y:15.75 in
Z:19.69 in
1 photo
thumb

AMS HMC 400 XL

X:23.5 in
Y:17.6 in
Z:16.3 in
1 photo
thumb

AMS PROTON

X:19.69 in
Y:15.75 in
Z:15.75 in
1 photo
thumb

BYJC MXR-460V

X:29.9 in
Y:18.0 in
Z:17.6 in
1 photo
thumb

CELLCON H-15D DUPLEX

Generous 24"X21"X18" work envelope for each of the two opposing spindles, allowing simultaneous machining of two sides of a part on a single setup. Each spindle runs independently or synchronously ...

X:24.0 in
Y:21.0 in
Z:18.0 in
1 photo
thumb

CELLCON H-15P PALLET INDEXER

24"X21"X18" work envelope, 15-hp, ISO 40 taper spindle standard with 2000, 3000, or 6000 RPM. Feedrates to 600 IPM (15.24 MPM). 6-tool ATC standard with optional 12-tool ATC. Rotating double-ended ...

X:24.0 in
Y:21.0 in
Z:18.0 in
1 photo
thumb

CELLCON H-15S SIMPLEX

24"X 21"X 18" work envelope, 15-hp, ISO 40 taper spindle standard with 2000, 3000, or 6000 RPM. Feedrates to 600 IPM (15.24 MPM). 6-tool ATC standard with optional 12-tool ATC. Specify the optional...

X:24.0 in
Y:21.0 in
Z:18.0 in
1 photo
Brochure
thumb

ELHA SMX 5189

X:19.69 in
Y:19.69 in
Z:19.69 in
1 photo
thumb

ENSHU GE40H

Compact and nimble, this 400mm pallet, 40-tool capacity horizontal machining center is ideal for secondary operations and die cast processing. With it’s 12,000 RPM and Big Plus/CAT40 taper spindle,...

X:19.7 in
Y:19.7 in
Z:20.0 in
1 photo
thumb

HORKOS TM100H

X:26.38 in
Y:19.69 in
Z:19.69 in
1 photo
thumb

HULLER HILLE n-bh 70

X:24.7 in
Y:19.6 in
Z:21.6 in
1 photo
thumb

HULLER HILLE NBH 90

X:24.7 in
Y:19.6 in
Z:22.7 in
1 photo
thumb

JINAN FIRST J1HMC40

Linear guideways, inverted T-layout, movable column type. High speed, efficient, and precise machining center.

X:24.8 in
Y:19.69 in
Z:20.47 in
1 photo
thumb

JINAN FIRST J1HMC50

Linear guideways, inverted T-layout, movable column type. High speed, efficient, and precise machining center.

X:24.8 in
Y:19.69 in
Z:20.47 in
1 photo
thumb

JUPITER HMC-380

X:19.6 in
Y:16.5 in
Z:14.9 in
1 photo
thumb

JUPITER HMC-400

X:23.6 in
Y:19.6 in
Z:19.6 in
1 photo
thumb

KAAST MACHINE TOOLS H-MILL 2P 5.5

X:23.0 in
Y:20.0 in
Z:23.0 in
1 photo
Brochure
thumb

KAUFMAN DUOFLEX

The Kaufman DUOflex Horizontal Twin Spindle Machining System is designed for lower volume projects requiring a high-speed machine with ample power at the spindle. The load/ unload area is segregate...

X:15.75 in
Y:17.72 in
Z:15.75 in
1 photo
Video
thumb

KENT CNC KHV-400

Kent CNC sets a new industry standard with their latest combination machining center, model KHV-400. By combining a horizontal machining center with a vertical machining center, this cutting-edge ...

X:19.7 in
Y:19.7 in
Z:17.8 in
4 photos
Video
thumb

KIRA KN-40HB

X:19.6 in
Y:15.7 in
Z:15.7 in
1 photo
thumb

KITAMURA MYCENTER-HX300IG/400

Features • Drastically reduces set-up times for highly complex parts requiring multiple operations • Amazingly small footprint saves on valuable floor space • Positioning Accuracy: ±0.000079” Full ...

X:18.1 in
Y:20.1 in
Z:22.0 in
1 photo
Video
thumb

KIWA KH-41

X:20.1 in
Y:20.1 in
Z:20.1 in
1 photo
thumb

LMW JHM 40

X:19.69 in
Y:19.69 in
Z:19.69 in
1 photo
thumb

MAKINO J3

Designed for flexible transfer lines, the J3 is primarily intended for the economic machining of mass-produced aluminum automotive parts. Its high spindle speed and excellent accuracy make it the p...

X:24.8 in
Y:15.7 in
Z:15.7 in
1 photo
thumb

MANFORD HM-400

X:23.62 in
Y:19.69 in
Z:19.69 in
1 photo
thumb

MAXMILL HM-500

X:24.02 in
Y:20.08 in
Z:24.02 in
1 photo
thumb

MAZAK UN-600/30H

MACHINE DESCRIPTION: The UN-600/30H ultra narrow Horizontal Machining Center is designed for high volume applications and is more productive per unit of floor space than conventional machining cent...

X:20.08 in
Y:15.75 in
Z:14.96 in
1 photo
thumb

MUGACENTER H4030

X:15.75 in
Y:17.72 in
Z:14.96 in
1 photo
thumb

OKK HA400

X:43.3 in
Y:19.7 in
Z:16.5 in
1 photo
thumb

OKUMA MA-400H

The MA-400H achieves stable machining accuracies that are unsurpassed as a general purpose horizontal machining center with superb thermal deformation control system, based on Okuma's original Ther...

X:22.05 in
Y:15.49 in
Z:24.61 in
1 photo
Video
thumb

OKUMA MILLAC 44H

The Okuma MILLAC 44H is a high speed horizontal machining center built for high performance production. It features an automatic tool changer with an impressive tool-to-tool time of 1.0 sec. and ch...

X:16.14 in
Y:18.11 in
Z:18.5 in
1 photo
thumb

SAMAG MFZ 4-2W

Move into the fast lane with our multi-spindle machining centres - take advantage of our tried and tested excellent technological processing concepts. The processing can be carried out, depending ...

X:17.72 in
Y:19.69 in
Z:17.72 in
1 photo
Brochure
thumb

SAMAG MFZ 4-3W

Move into the fast lane with our multi-spindle machining centres - take advantage of our tried and tested excellent technological processing concepts. The processing can be carried out, depending ...

X:11.81 in
Y:19.69 in
Z:17.72 in
1 photo
Brochure
thumb

SAMAG MFZ 4-4W

Move into the fast lane with our multi-spindle machining centres - take advantage of our tried and tested excellent technological processing concepts. The processing can be carried out, depending ...

X:8.858 in
Y:19.69 in
Z:17.72 in
1 photo
Brochure
thumb

SCHMID MASCHINEN SE 361

The SE 361 is a machining centre with horizontal work spindle which is characterised by maximum stability and high drive powers. The work spindle is located in a module where the X, Y and Z axes ar...

X:27.56 in
Y:19.69 in
Z:19.09 in
1 photo
thumb

SCHMID MASCHINEN SE 362-4 AXES

The SE 362 machining centre combines maximum stability, high drive power to optimise machining times, quick rapid feeds, good accessibility to all components and a clear design. The basic design i...

X:29.53 in
Y:17.72 in
Z:19.69 in
1 photo
thumb

SCHMID MASCHINEN SE 362-4 CLAMPING BRIDGE

The basic concept is a horizontal twin-spindle machine with a swivel table. Each of the two work spindles is located in its own 3-axis machining module. In normal machining operation, the spindles ...

X:29.53 in
Y:17.72 in
Z:19.69 in
1 photo

SCHMID MASCHINEN SE 362-5

This machining centre is characterised by high productivity and great flexibility. The basic concept is a horizontal twin-spindle machine with a swivel table installed in front of it. Each of the ...

X:29.53 in
Y:17.72 in
Z:19.69 in
thumb

SCHMID MASCHINEN SE 372

This dual-spindle turning-milling machining centre consists of two modules each equipped with its own control. Each of these two modules consists of a rugged frame structure into which the horizont...

X:31.5 in
Y:17.72 in
Z:19.69 in
1 photo
thumb

SCHMID MASCHINEN SE 410

The dual-spindle machining centre SE 410 is designed for series production and allows moving each spindle alone and individually. Thus, the correction options are given in X, Y and Z axis, benefici...

X:15.75 in
Y:19.69 in
Z:19.69 in
1 photo
thumb

SCHMID MASCHINEN SE 460

This machining centre is characterised by high efficiency and minimal space requirements. The horizontal slide with the holder of the guide rails of the machining units is located on the machine b...

X:15.75 in
Y:15.75 in
Z:29.53 in
1 photo
thumb

STARRAG NB 251

X:27.559 in
Y:15.748 in
Z:15.748 in
1 photo
thumb

SW BA 311

With the new BA 3 series, development continues. Monobloc design is combined with a 3-axis unit, a double swivel table, and 2 or 4 horizontal spindles with a spindle distance of 300 and 150 mm resp...

X:21.65 in
Y:19.69 in
Z:14.76 in
1 photo
thumb

SW BA 312

With the new BA 3 series, development continues. Monobloc design is combined with a 3-axis unit, a double swivel table, and 2 or 4 horizontal spindles with a spindle distance of 300 and 150 mm resp...

X:21.65 in
Y:17.72 in
Z:14.76 in
1 photo
thumb

SW BA 321

With the new BA 3 series, development continues. Monobloc design is combined with a 3-axis unit, a double swivel table, and 2 or 4 horizontal spindles with a spindle distance of 300 and 150 mm resp...

X:11.81 in
Y:19.69 in
Z:14.76 in
1 photo
Brochure
thumb

SW BA 322

With the new BA 3 series, development continues. Monobloc design is combined with a 3-axis unit, a double swivel table, and 2 or 4 horizontal spindles with a spindle distance of 300 and 150 mm resp...

X:11.81 in
Y:17.72 in
Z:14.76 in
1 photo
Brochure