New Ironworkers (121)
New Models (121)
1 - 50 of 121 Models
thumb

JOTUN Q35Y-44

Hydraulic Ironworker Width x Thickness-------13.77" x .25" Round Bar Shear------ 1.125" Punch Capacity------.75" x .625" Punching Pressure------44 Tons Throat Depth -------6.88" Square Bar Shear--...

Tonnage:44.0 T
Angle (L1):3.0 in
Angle (L2):3.0 in
1 photo
thumb

JOTUN Q35Y-441

4 STATION HYDRAULIC IRONWORKER Width x Thickness------13.77" x .25" Round Bar Shear-----1.125" Punch Capacity------.75" x .625" Punching Pressure------44 Tons Throat Depth------ 6.88" Square Bar ...

Tonnage:44.0 T
Angle (L1):3.0 in
Angle (L2):3.0 in
1 photo
thumb

HOSTON HIW-45

HIW-45 Punching Pressure: 45T Max.shearing thickness of steel plates: 15mm Strength of steel plates: 450N/square mm Angle of shearing: 7 ° Shearing size of one stroke: 15*200mm or 12*300mm Ram str...

Tonnage:45.0 T
1 photo
Brochure
thumb

SHEM Q35Y-12

Tonnage:45.0 T
Angle (L1):3.937 in
Angle (L2):3.937 in
1 photo
thumb

JINSANLI XPIW-4

Tonnage:49.604 T
Angle (L1):4.724 in
Angle (L2):4.724 in
2 photos
thumb

JOTUN Q35Y-50TON

Round Bar Shear ------1.125" Rectangle Notcher W x D x T-----2" x 3.5" x .281" Single Vee Press Brake L x T-----6.312" x .312"* Punch Capacity------.875" x .625" Punching Pressure------50 Tons Pipe...

Tonnage:50.0 T
Angle (L1):3.0 in
Angle (L2):3.0 in
1 photo
thumb

POLY TOP WF35Y-16

Tonnage:50.0 T
Angle (L1):4.724 in
Angle (L2):4.724 in
1 photo
thumb

EAST CHINA Q35Y-16

Tonnage:55.0 T
Angle (L1):4.921 in
Angle (L2):4.921 in
1 photo
thumb

JINGJIANG SANLI Q35Y-16,20,25,30

Industrial-grade dual hydraulic Ironworker featuring multiple functions five station, including Punch, Angle Shear, Flat Shear, Round/Square Bar Shear, Rec. Notch, V-Notch, Channel Shear, I beam sh...

Tonnage:55.0 T
1 photo
thumb

SHEM Q35Y-15

Tonnage:55.0 T
Angle (L1):4.724 in
Angle (L2):4.724 in
1 photo
thumb

SHANGHAI BOHAI Q35Y-15

Tonnage:55.115 T
Angle (L1):4.921 in
Angle (L2):4.921 in
1 photo
thumb

HOSTON HIW Q35Y-16

"Hoston Machinery" Hydraulic Ironworker featuring multiple functions, including: Punching, Angle Steel Shearing, Flat Bar Shearing, Round/Square Bar Shearing, Notching, V-Notching, C-Channel Sheari...

Tonnage:60.0 T
Angle (L1):4.724 in
Angle (L2):2.756 in
1 photo
thumb

POLY TOP WF35Y-12

Tonnage:60.0 T
Angle (L1):3.15 in
Angle (L2):3.15 in
1 photo
thumb

ATM Q35Y-16

Model Q35Y-16 Punching Force(T) 55 Max shearing Material(mm) 16 Material intensity of compression(N/mm square) ≤450 Shearing Angle 7° One stroke shearing size(H×W)mm 16×250 8×400 Slide block strok...

Tonnage:60.627 T
1 photo
thumb

SANLI Q35Y-16

Type Q35Y-16 Punching pressure(Ton) 55 Max.cutting thickness(mm) 16 Plate strength(N/mm2) ≤450 Cutting angle(degree) 7 Shearing size of one stroke(mm) 16×250 / 8×400 Ram stroke(mm) 80 Number of str...

Tonnage:60.627 T
1 photo
thumb

SHANGHAI BOHAI Q35Y-16

冲压力(吨) Pressure(ton) 55 可剪最大板厚(毫米)Max. Cutting thickness(mm) 16 板料强度(牛顿/毫米2)Plate strength (n/mm2) ≤450 剪切角Cutting angle (degree) 7° 一次行程剪板尺寸(厚×宽)(毫米)Shearing size of one stroke(mm) 16×250 滑块行程Ram ...

Tonnage:60.627 T
Angle (L1):4.921 in
Angle (L2):4.921 in
1 photo
thumb

JOTUN Q35Y-16

Q35Y series Hydraulic Ironworker Machine: 1. CE, ISO, SASO, CQC certificate 2. Temperature cooling system 3. Automatic holding

Tonnage:62.0 T
3 photos
thumb

JOTUN Q35Y-62TON

JOTUN HYDRAULIC IRONWORKER Round Bar Shear ------1.5" Rectangle Notcher W x D x T----2" x 3.5" x .312" Single Vee Press Brake-----L x T 6.312" x .312"* Punch Capacity------1.125" x .625" Punching ...

Tonnage:62.0 T
Angle (L1):4.0 in
Angle (L2):4.0 in
1 photo
thumb

DURMARK AUTO 65T IRONWORKER

Ironworker is a combination of metal cutting, punching, shearing, bending and other functions, witth the function of simple operation, low energy consumption, low maintenance costs. Mainly used in ...

Tonnage:65.0 T
Angle (L1):1640.0 in
Angle (L2):730.0 in
1 photo
Brochure
thumb

MASTEEL MIWH-66

Tonnage:66.0 T
Angle (L1):5.0 in
Angle (L2):5.0 in
1 photo
thumb

JOTUN Q35Y-60

Processing Capacity (KN) 600 Material Tensile Strength (Mpa) ≤450 Flat Shearing Max. Shearing Capacity (thickness* width (mm) 16×250 8×400 Bar Shearing Square Bar(mm) 40 Round Bar (mm)...

Tonnage:66.1 T
Angle (L1):4.724 in
Angle (L2):4.724 in
1 photo
thumb

AMCO 15KS

Model Iron Worker 15KS Presure(TON) 60 Max.cutting thickness(mm) 15 plate strength (N/mm2) ≤450 Sheraing size of one stroke(mm) 350×12 Ram stroke(m...

Tonnage:66.139 T
1 photo
thumb

AMCO PUNCH 20

Model Punch 20 Pressure(Ton) 60  Punching Capacity Dia 22×20 Max.Diameter×Thickness Dia 50×9 Throat depth(mm) 400  Ram stroke(mm) 80 Cycles/min(20mm str...

Tonnage:66.139 T
1 photo
thumb

JIANGSU APEC AIW-60

Features 1. High Quality Components & System a. Main Electrical component: Schneider, Germany. b. Valve: Yuken, Japan c. Pump: Atos, Italy d. Oil Seals: NOK, Japan e. Timer Relay: OMRON, Japan f. W...

Tonnage:66.139 T
Angle (L1):4.724 in
Angle (L2):4.724 in
2 photos
thumb

JIANGSU APEC M60

Model M60 Punching Pressure(T) 60 Max Shearing Thickness(mm) 16 Plate Strength(N/mm2) ≤450 Shearing Angle 13° Flat Bar(H*W)(mm) 16×120 Ram Stroke(mm) 26 Number of Stroke(times/min) 36 Throat Depth(...

Tonnage:66.139 T
1 photo
thumb

JINSANLI DIW-60

Tonnage:66.139 T
Angle (L1):4.724 in
Angle (L2):4.724 in
1 photo
thumb

JOTUN HIW-60

Model HIW-60 Processing Capacity (KN) 600 Material Tensile Strength (Mpa) ≤450 Flat Shearing Max. Shearing Capacity 16×250 (thickness* width (mm) 8×400 Bar Shearing Square Bar(mm) 40 Round Bar...

Tonnage:66.139 T
Angle (L1):4.724 in
Angle (L2):4.724 in
1 photo
thumb

JOTUN Q35Y-20

Model HIW-60 Processing Capacity (KN) 600 Material Tensile Strength (Mpa) ≤450 Flat Shearing Max. Shearing Capacity 16×250 (thickness* width (mm) 8×400 Bar Shearing Square Bar(mm) 40 Round...

Tonnage:66.139 T
Angle (L1):4.724 in
Angle (L2):4.724 in
1 photo
thumb

SANLI Q35Y-12

Model Q35Y-12 Punch force 600KN Throat depth 110mm Angle bar shear 100x10mm Square steel shear 30x30mm Steel sheet shear 12x350mm Round steel shear Φ40mm Punch holes Φ25/12mm Stroke per min...

Tonnage:66.139 T
Angle (L1):3.937 in
Angle (L2):3.937 in
1 photo
thumb

ATM Q35-16

Model Q35-16 Punching Force(T) 63 Max shearing Material(mm) 16 Material intensity of compression(N/mm square) ≤450 Shearing Angle 13° One stroke shearing size(H×W)mm 20×140 Slide block stroke(mm) 2...

Tonnage:69.446 T
1 photo
thumb

JINSANLI Q35-16

Tonnage:69.446 T
Angle (L1):4.724 in
Angle (L2):4.724 in
1 photo
Brochure
thumb

EAST CHINA Q35Y-20

Tonnage:75.0 T
Angle (L1):5.512 in
Angle (L2):5.512 in
1 photo
thumb

POLY TOP WF35Y-20

Tonnage:80.0 T
Angle (L1):6.299 in
Angle (L2):6.299 in
1 photo

HUAXIA Q35Y-20

Tonnage:82.673 T
thumb

SANLI Q35y-20

Type Q35Y-20 Punching pressure(Ton) 75 Max.cutting thickness(mm) 20 Plate strength(N/mm2) ≤450 Cutting angle(degree) 8 Shearing size of one stroke(mm) 20×330 / 10×480 Ram stroke(mm) 80 Number of st...

Tonnage:82.673 T
1 photo
thumb

JOTUN JT-84

Round Bar Shear ----1.75" Rectangle Notcher W x D x T 2" x 3.5" x .5" Single Vee Press Brake L x T 9.875" x .625" Punch Capacity 1.125" x .875" Punching Pressure-----84 Tons Pipe Notching-----2.5" ...

Tonnage:84.0 T
1 photo
thumb

JINSANLI DIW-90L

Tonnage:90.0 T
Angle (L1):4.724 in
Angle (L2):4.724 in
1 photo
thumb

MASTEEL MIWH-90

Tonnage:90.0 T
Angle (L1):5.5 in
Angle (L2):5.5 in
1 photo
thumb

SHEM Q35Y-20

Tonnage:90.0 T
Angle (L1):5.512 in
Angle (L2):5.512 in
1 photo
thumb

AMCO 20KS

Model Iron Worker 20KS Presure(TON) 85 Max.cutting thickness(mm) 20 plate strength (N/mm2) ≤450 Sheraing size of one stroke(mm) 406×20 Ram stroke(m...

Tonnage:93.696 T
1 photo
thumb

AMCO PUNCH 22

Model Punch 22 Pressure(Ton) 90  Punching Capacity Dia 26×22 Max.Diameter×Thickness Dia 50×12 Throat depth(mm) 400  Ram stroke(mm) 80 Cycles/min(20mm st...

Tonnage:99.208 T
1 photo
thumb

ATM Q35Y-20

Model Q35Y-20 Punching Force(T) 90 Max shearing Material(mm) 20 Material intensity of compression(N/mm square) ≤450 Shearing Angle 8° One stroke shearing size(H×W)mm 20×330 10×480 Slide block stro...

Tonnage:99.208 T
1 photo
thumb

DURMARK AUTO Q35Y

Ironworker is a combination of metal cutting, punching, shearing, bending and other functions, with the function of simple operation, low energy consumption, low maintenance costs. Mainly used in m...

Tonnage:99.208 T
Angle (L1):73.228 in
Angle (L2):31.496 in
1 photo
Brochure
thumb

JIANGSU APEC AIW-90

APEC Brand AIW series Ironworker features multiple functions, including: punching all kinds of holes (round hole, square hole, oblong hole), louver punching, steel plate punching, flat bar punching...

Tonnage:99.208 T
Angle (L1):5.512 in
Angle (L2):5.512 in
2 photos
thumb

JINSANLI DIW-90

Tonnage:99.208 T
Angle (L1):5.512 in
Angle (L2):5.512 in
1 photo
thumb

JINSANLI DIW-90E

Tonnage:99.208 T
Angle (L1):5.512 in
Angle (L2):5.512 in
1 photo
thumb

JINSANLI DIW-90E/L

Tonnage:99.208 T
Angle (L1):5.512 in
Angle (L2):0.551 in
1 photo
Brochure
thumb

JOTUN HIW-90

Model HIW-90 Processing Capacity (KN) 900 Material Tensile Strength (Mpa) ≤450 Flat Shearing Max. Shearing Capacity 20×330 (thickness* width (mm) 10×480 Bar Shearing Square Bar(mm) 45 Round Ba...

Tonnage:99.208 T
Angle (L1):5.512 in
Angle (L2):5.512 in
1 photo
thumb

EAST CHINA Q35Y-25

Tonnage:110.0 T
Angle (L1):6.299 in
Angle (L2):6.299 in
1 photo
thumb

JINSANLI QA34-25

Tonnage:110.0 T
Angle (L1):5.896 in
Angle (L2):5.896 in
1 photo
Brochure