New Notching Machines (184)
New Models (184)
1 - 50 of 184 Models
thumb

LOCKFORMER ROTO NOTCHER

Dove-tail notch out of 24 to 30 gauge galvanized — in only one pass! Just cut to width and length or use scrap. This machine uses either 3" or 6" width blanks with simple adjustment.

Max Thickness:0.012 in
Max Thickness (gauge):30.0 ga
1 photo
thumb

ATM Q28B4×200

Model Q28B4×200 Min.Notching thickness(mm) Mild steel 0.5 strainless steel 0.5 Max.Notching thickness(mm) Mild steel 4 strainless steel 2 Min.Notching ang...

Max Thickness:0.02 in
1 photo
thumb

KURAKI KNCP-6

World’s Speed Leader At 1000 spm While Saving Labor and Retaining High Accuracy

Max Thickness:0.02 in
1 photo
thumb

RAMS 2001

Max Thickness:0.036 in
Max Thickness (gauge):20.0 ga
1 photo
thumb

TIN KNOCKER EDGE

Round surface edges for collars and end caps.

Max Thickness:0.036 in
Max Thickness (gauge):20.0 ga
Stock Dimension (X):0.75 in
1 photo
Video
thumb

VICON EDGE NOTCHER

The Vicon Edge Notcher has an unlatching feature so that round pipe can be notched after it is rolled. Tap-in locks can be notched after they are roll formed. The punch will notch right up to the ...

Max Thickness:0.036 in
Max Thickness (gauge):20.0 ga
1 photo
thumb

GODSON GTCN

Max Thickness:0.039 in
1 photo
thumb

KURAKI KNCP-10

World’s Speed Leader At 1000 spm While Saving Labor and Retaining High Accuracy

Max Thickness:0.039 in
1 photo
thumb

KURAKI KNCP-15

World’s Speed Leader At 1000 spm While Saving Labor and Retaining High Accuracy

Max Thickness:0.039 in
1 photo
thumb

KURAKI KNCP-20

World’s Speed Leader At 1000 spm While Saving Labor and Retaining High Accuracy

Max Thickness:0.039 in
1 photo
thumb

KURAKI KNCP-8

World’s Speed Leader At 1000 spm While Saving Labor and Retaining High Accuracy

Max Thickness:0.039 in
1 photo
thumb

TENNSMITH 16-18

The heavy cast iron construction allows the notcher to be used to side shear six inches of material to its rated capacity; and the throat behind the upper ram is beveled on one side to permit long ...

Max Thickness:0.048 in
Max Thickness (gauge):18.0 ga
Stock Dimension (X):6.0 in
1 photo
thumb

ACL Q28A4X250

Max Thickness:0.059 in
1 photo
thumb

EASTAR LE-416

Max Thickness:0.059 in
Max Thickness (gauge):16.0 ga
Stock Dimension (X):6.0 in
1 photo
thumb

JOUANEL ENC-150-15

Max Thickness:0.059 in
1 photo
thumb

JUWEI Q11-1.5X80

Max Thickness:0.059 in
Stock Dimension (X):3.15 in
1 photo
thumb

JUWEI Q11-A1.5X80

Max Thickness:0.059 in
Stock Dimension (X):3.15 in
1 photo
thumb

TTMC FN-1.5X80

Max Thickness:0.059 in
1 photo
thumb

BAILEIGH SN-F16-FN

Notching corners is a staple of any fabrication shop. Good clean notches are the difference between a great product and a not so great one. The SN-F16-FN sheet metal corner notcher is an economic...

Max Thickness:0.06 in
Max Thickness (gauge):16.0 ga
Stock Dimension (X):3.0 in
1 photo
thumb

BAILEIGH SN-F16-HN

The SN-F16-HN manual corner notcher is a high quality cast iron sheet metal notcher perfect for any garage or sheet metal shop. The cutting angle is fixed at 90 degrees and can notch up to 6" x 6" ...

Max Thickness:0.06 in
Max Thickness (gauge):16.0 ga
Stock Dimension (X):6.0 in
1 photo
thumb

JET HN-16T

JET’s high quality cast iron sheet metal notcher is ideal or any garage or sheet metal shop. It's compact design makes it perfect for on-site use. The cutting angle is fixed at ninety degrees and c...

Max Thickness:0.06 in
Max Thickness (gauge):16.0 ga
Stock Dimension (X):6.0 in
1 photo
thumb

KIDDER 68B

Long the industry standard, this popular 6" x 6" gauge Notch-Master comes equipped with reversible blades. This means that you can splay or pierce cut and adds coping to your capabilities. This mac...

Max Thickness:0.06 in
Max Thickness (gauge):16.0 ga
1 photo
Brochure
thumb

KING INDUSTRIAL KC-N616

Max Thickness:0.06 in
Max Thickness (gauge):16.0 ga
Stock Dimension (X):6.0 in
1 photo
thumb

LOCKFORMER SPEEDNOTCH 16

Speednotch allows you to gang-notch sheet metal hydraulically up to 600% faster than by hand, without layout or scribing. It’s the perfect tool for preparing ductwork to receive bar, slip or “S” a...

Max Thickness:0.06 in
Max Thickness (gauge):16.0 ga
1 photo
thumb

TIDE 130-5100

Specifications Model No.130-5100 Material Capacity 16Gauge Capacity 4Ton Notch 6×6×90° Stroke 3/4" Table dimensions 12"×18" Weight 210lbs Height(less hadle) 18-1/2"

Max Thickness:0.06 in
Max Thickness (gauge):16.0 ga
1 photo
thumb

TIN KNOCKER 1655

A heavy versatile tool capable of not only notching to capacity but also shearing and piercing operations in lighter gauge. Of heavy cast iron and fabricated construction, this table top machine co...

Max Thickness:0.06 in
Max Thickness (gauge):16.0 ga
1 photo
Brochure
thumb

LOCKFORMER TDC NOTCHER

TDC NOTCHER comes standard with 5 notching heads. The Lockformer TDC NOTCHER will gang notch duct blanks as much as 6 times faster than notching by hand. The Hydraulic powered notch units have in...

Max Thickness:0.063 in
Max Thickness (gauge):16.0 ga
1 photo
thumb

SHEM HN-152

Max Thickness:0.063 in
Stock Dimension (X):5.984 in
1 photo
thumb

KIDDER 70-S-H

Truly the finest power notcher ever made combining smooth hydraulic force, safe convenient foot control, precision and versatility. The offset head permits full 6" x 6" corner notching in 14 gauge ...

Max Thickness:0.075 in
Max Thickness (gauge):14.0 ga
1 photo
Brochure
thumb

KIDDER 70S

Perhaps the finest shearing machine ever made. This 6" x 6" notcher has patented split head that adjust in seconds to any tap up to 1". Blades are reversible for either splay or piece cutting, perm...

Max Thickness:0.075 in
Max Thickness (gauge):14.0 ga
1 photo
Brochure
thumb

MANGE MG-831

Max Thickness:0.079 in
1 photo
thumb

VOGEL ECONO ARC-FIT 25

The Vogel #25 Econo Arc-Fit is the perfect tool for low-volume notching of light-wall fence industry tubing. This tool is complete with three cutting disks for notching 1-3/8”, 1-5/8” & 1-7/8 - 2” ...

Max Thickness:0.109 in
Stock Dimension (X):1.5 in
1 photo
thumb

BAILEIGH SN-F11-AN

The SN-F11-AN pneumatic corner notcher from Baileigh Industrial is the great machine for making perfect corners in sheet metal. The SN-F11-AN corner notcher has an 11 gauge mild steel capacity, so...

Max Thickness:0.12 in
Max Thickness (gauge):11.0 ga
Stock Dimension (X):5.0 in
1 photo
thumb

KNUTH RAX

Motorized Tube Notcher for continuous operation with 2 Hp electric motor

Max Thickness:0.12 in
1 photo
thumb

KIDDER 43B

Extra heavy duty notcher with capacity for 5" x 5" notch in 1/8" inch mild steel or 14 ga. stainless.The throat is 7" deep, permitting a full 5" x 5" corner notch. Comes with short or long handles ...

Max Thickness:0.125 in
Max Thickness (gauge):11.0 ga
1 photo
Brochure
thumb

KIDDER 43BMP-S

This heavy duty hydraulically operated 5" x 5" notching machine can be used for shearing, squaring and trimming. Kidder's hydraulic system delivers smooth, safe power from 115VAC, under foot contro...

Max Thickness:0.125 in
Max Thickness (gauge):11.0 ga
Stock Dimension (X):5.0 in
1 photo
Brochure
thumb

KIDDER 59H40

Cuts a full 7-1/2" x 7-1/2" notch in 1/8" steel or shears any length to 7" width. 14 gauge capacity in stainless. Will take a full corner notch. operation is hydraulic with jug type foot control. F...

Max Thickness:0.125 in
Max Thickness (gauge):11.0 ga
Stock Dimension (X):7.5 in
1 photo
thumb

EASTAR CHN-220

Max Thickness:0.126 in
Stock Dimension (X):8.661 in
1 photo
thumb

JENG JIH JHN-220

Max Thickness:0.126 in
1 photo
thumb

VOGEL ECONO ARC-FIT 25A

The Vogel #25 Econo Arc-Fit is the perfect tool for low-volume notching of light-wall fence industry tubing. This tool is complete with three cutting disks for notching 1-3/8”, 1-5/8” & 1-7/8 - 2” ...

Max Thickness:0.126 in
Stock Dimension (X):1.315 in
1 photo
thumb

EUROMAC FA200/6

Max Thickness:0.135 in
Max Thickness (gauge):10.0 ga
Stock Dimension (X):8.0 in
1 photo
Brochure
thumb

BAILEIGH SN-F04-MS

If you are looking for a little more capacity from your corner notcher, try the SN-F04-MS sheet metal corner notcher from Baileigh Industrial. The SN-F04-MS is great for making perfect corners in m...

Max Thickness:0.15 in
Max Thickness (gauge):9.0 ga
Stock Dimension (X):8.5 in
1 photo
thumb

BAILEIGH SN-F09-MS

The SN-F09-MS sheet metal corner notcher from Baileigh Industrial is the perfect machine for making those perfect corners in that just are not possible with hand tools. This corner notcher has a 9...

Max Thickness:0.15 in
Max Thickness (gauge):9.0 ga
Stock Dimension (X):7.75 in
1 photo
thumb

BAILEIGH SN-V04-MS

Ever have odd angles that you need to notch out of sheet metal, something that will look totally whack when finished if not done right? Enter the SN-V04-MS; this great machine is a 220 volt three ...

Max Thickness:0.15 in
Max Thickness (gauge):9.0 ga
1 photo
thumb

VOGEL 101-HPP

The ARC-TWIN notches both sides of pipe and tubing ends for T-joints with one stroke of the press. There is no deformation, all edges are clean and the “twin notches” form perfect T-joints for weld...

Max Thickness:0.154 in
Stock Dimension (X):2.375 in
1 photo
thumb

SCOTCHMAN AL1

The AL1 can be used to notch 3/4", 1" and 1-1/4" Schedule 40 Pipe. This hand-operated machine can easily be wall mounted.

Max Thickness:0.155 in
1 photo
thumb

SCOTCHMAN AL3

The AL3 can be used to notch 1-1/4" and 1-1/2" Schedule 40 Pipe. This machine can easily be wall mounted.

Max Thickness:0.155 in
1 photo
thumb

SCOTCHMAN ALU

The ALU can be used to notch a sink outflow in pipes with an external diameter of 1.0630" to 2.40158".

Max Thickness:0.155 in
1 photo
thumb

BOSCHERT LITE

Max Thickness:0.156 in
Max Thickness (gauge):10.0 ga
Stock Dimension (X):8.875 in
1 photo
Brochure

BOSCHERT PN

8-7/8" x 8-7/8" x 5/32" BOSCHERT POWER NOTCHER MODEL PN4         S/N 1969         Year 1993   Capacity .........

Max Thickness:0.156 in
Stock Dimension (X):8.875 in