ARTER E-36
BLANCHARD 20AD-36
The Blanchard 20AD-36 is designed for precision grinding of parts up to 48″ in diameter. Capable of holding flatness and parallelism to +/- .0002″, Blanchard surface grinders are used across numero...
DCM IG 380 SD
The IG 380SD provides the greatest capacity of all of the DCM grinders, it features a 36” diameter electromagnetic chuck with configuration features of through table vacuum, air or hydraulic clampi...
HAISHUO M73100
ACER ARG-40SD
ELB ROTARY H10
The rotary machine with its rigid design and cross traversing column is equipped with a high precision rotary table which results in an unique rotary surface grinder offering high precision and inc...
ELB ROTARY V 1000
The rotary model combines the robust construction of the ELB-column with a precision rotary table. The resulting machine concept provides convincing results in precision and productivity. On the r...
ELB ROTARY VS 1000
Rotary VS Machine base with X axis Table mounted single grain diamond and roll dressing units available Optional automatic wheel changer
GER RT-1000
Up to 1500mm of table diameter. Equipped with an electro magnetic permanent plate. Best grinding precision for big parts as gears, seals and so on, with tight flatness accuracy. The design of th...
GOCKEL RV150
GOCKEL RV180
HMT RSG 1000
KEHREN D10
KEHREN RW10
PROTH PSRP-1000S
SPECIFICATION / MODELS PSRP-1000S General Capacity Max. grinding radius 600mm Vertical grinding diameter φ200~φ1000mm Spindle center height from table 900mm(1100mm) Max. height from table to...
REFORM RFD 1000
ALEX R-40
STANDARD EQUIPMENT Segmental Chuck with two sets of grinding segments; Built-in Wheel Dressing Unit; Table Guard; Set of Wrenches; All Electric Motors; Internal Wiring and Control Gear; Electro Ma...
ALEX R40
This series is designed for flat grinding of one side of the job at a time. Rotary table operated on large circular ways lubricated by means of an oil sump and carries an electromagnetic chuck with...
ALEX RH 1000
STANDARD EQUIPMENT Grinding wheels (2): grinding wheel flange unit, wheel balancing mandrel; table guard; set of wrenches; hydraulic system; electric motors; all internal wiring and control gear. ...
ARTER B-40
ARTER H-40
SUPERTEC HR-40
SUPERTEC VR-40
BLANCHARD 22AD-42
The Blanchard 22AD-42 is designed for precision grinding of parts up to 48″ in diameter. Capable of holding flatness and parallelism to +/- .0002″, Blanchard surface grinders are used across numero...
