ACCUTEX AP-6040
AP series casting has compound table design by Y axis column moving. The center of gravity is always located between 2 linear guideways of X axis table. X and Y axes are independent without accumul...
ACCUTEX AU-500I
AGIECHARMILLES CUT 300 MS
The AgieCharmilles CUT 300 mS is the most versatile machine range on the market, capable of cutting 45° cones, and can do this whatever the height of the part. The principle of crossed double guidi...
AGIECHARMILLES CUT 300 SP
The AgieCharmilles CUT 300 Sp is the most versatile machine range on the market, capable of cutting 45° cones, and can do this whatever the height of the part. The principle of crossed double guidi...
AGIECHARMILLES CUT 30P
The AgieCharmilles CUT 30 P has on board technologies that allow a unique speed cut. These technologies optimise main, 2nd and 3rd fi nishing cuts, to attain the most common values of surface rough...
AGIECHARMILLES CUT E 600
The AgieCharmilles CUT E 350/AgieCharmilles CUT E 600 range puts efficiency at the touch of your finger with a smart, easy-to-use human-machine interface (HMI) and onboard technologies that streaml...
AMSTECH AW5L
BAOMA BM600X500
SPECIFICATIONS 1.Table Travel 600 mm×500 mm 2.Swing Table Size Φ630 mm 3.Max Cutting Thickness(mm): 500 mm 4.Max Cutting Taper 0°/100mm 5.Wire Diameter: φ0.15—φ0.20mm 6.Max Cut...
BAOMA BM800B
PARAMETERS BM800B Table Travel (mm) 630 x 800 Table Size (mm) 660 x 1100 Roughness Once Cutting (um) ...
BAOMA BM800D
PARAMETERS BM800D Table Travel (mm) 630 x 800 Table Size (mm) 660 x 1100 Roughness Once Cutting (um) ...
BAOMA BM800D-C
CNC WIRE CUT EDM BM800D-C BM800D-C Unit Worktable size (L x W) 660 x 1100 mm Table travel(X x Y) 630 x 800 mm Max. workpiece thickness 500 mm Max. taper angle/plate thickness 6 degree/mm Max. ...
BAOMA BM800F
PARAMETERS BM800F Table Travel (mm) 630 x 800 Table Size (mm) 660 x 1100 Roughness Once Cutting (um) ...
BAOMA DK7763B
CNC Wire Cut EDM DK7763 DK7763B Table Travel (mm) 630 x 800 Table Size (mm) 660 x 1100 Roughness ...
BAOMA DK7763D
CNC Wire Cut EDM DK7763 DK7763D Table Travel (mm) 630 x 800 Table Size (mm) 660 x 1100 Roughness ...
BAOMA DK7763D-C
CNC WIRE CUT EDM DK7763D-C DK7763D-C Unit Worktable size (L x W) 660 x 1100 mm Table travel(X x Y) 630 x 800 mm Max. workpiece thickness 500 mm Max. taper angle/plate thickness 6 degree/mm Max...
BAOMA DK7763F
CNC Wire Cut EDM DK7763 DK7763F Table Travel (mm) 630 x 800 Table Size (mm) 660 x 1100 Roughness ...
CHMER EQ640L
CHMER G64F
CHMER G64S
CHMER GX640L+
CHMER RV653L
CONCORD BM800D-C
CONCORD DK-7763
CREATOR CW640
CREATOR CW640S
EASTAR WI-60E
ELECTRONICA EW1000
ELECTRONICA EW800
ELECTRONICA SPRINTCUT DLX
FORTUNE PACIFIC WEDM630
1. The cast of WEDM630 Medium Speed Wire Cut EDM body adopts the resin-sand technology with the influence of high temperature annealing, which makes the body be capable of resisting distortion. 2. ...
FRANK PHOENIX CW-50
GLMTC DK7740
JZ DK7755
"CNC Wire Cutting Machine DK7755 Worktable size:596*880 mm Worktable travel:550*650 mm Maximum work piece cutting thickness:500 mm Machining precision (cutting octagon):0.015 mm Maximum cutting spe...
JZ DK7755B
"CNC Wire Cutting Machine DK7755B Worktable size:596*1060 mm Worktable travel:550*850 mm Maximum work piece cutting thickness:500 mm Machining precision (cutting octagon):0.015 mm Maximum cutting s...
JZ DK7763
"CNC Wire Cutting Machine DK7763 Worktable size:790*1260 mm Worktable travel:630*1000 mm Maximum work piece cutting thickness:600 mm Machining precision (cutting octagon):0.015 mm Maximum cutting s...
KENT USA WFI-60
Wire-Cut EDMs can cut plates as thick as 300 mm and are ideal for creating punches, tools and dies from exotic hard metals that are difficult to machine with conventional methods. They can machine...
KENT USA WSI-640
Wire-Cut Submerge Type EDMs are excellent at maintaining stable part and lower arm, fixture and worktable temperatures and thus resulting in straighter, more accurate cuts. These EDMs are the way ...
KINGRED DK7763
KINGRED KD6380CL
KINGRED KD6380GCL
KINGRED KD6380H
KINGRED KD800CL
Item KD800CL Unit Travel of X/Y/Z 630×800×300 mm Table size 780×1010 mm Cut taper/thickness ±3°/80 °/mm Cut accuracy Octagon ±0.006 mm Taper ±0.015 mm Max. cut speed 180 mm2/min Best Surf...
KINGRED KD800GL
KINGRED KD800ZL
Item KD800ZL Travel of X/Y/Z 630×800×300 mm Table size 780×1010 mm Cut taper/thickness ±15°/80 °/mm Cut accuracy Octagon ±0.003 mm Taper ±0.015 mm Max. cut speed 180 mm2/min Best Surface...
KNUTH NEOSPARK B 500
MACHIMAX DK7750
MAKINO U53J
Makino’s Uj-Series of WEDM machines, the U32j and the U53j, take accuracy and finish capabilities to a higher level. Targeted to applications in precision plastic injection molds, engineered plasti...
MAKINO UPV-5
The UPV-3 and UPV-5 ultra-high-precision WEDM machines are designed with an oil dielectric system for precision machining of carbides and other hardened materials used in the manufacturing of tooli...