ACCUTEX AL-500SA
Linear Shaft Motor Rapid servo control, enhancement of sensitivity in discharge gap control. Improving cutting speed up to 8~10% 1/1000 High Resolution Signal Process High resolution in linear s...
ACCUTEX AP-6040
AP series casting has compound table design by Y axis column moving. The center of gravity is always located between 2 linear guideways of X axis table. X and Y axes are independent without accumul...
ACCUTEX AU-500I
AGIECHARMILLES CUT 30P
The AgieCharmilles CUT 30 P has on board technologies that allow a unique speed cut. These technologies optimise main, 2nd and 3rd fi nishing cuts, to attain the most common values of surface rough...
AGIECHARMILLES CUT E 600
The AgieCharmilles CUT E 350/AgieCharmilles CUT E 600 range puts efficiency at the touch of your finger with a smart, easy-to-use human-machine interface (HMI) and onboard technologies that streaml...
AMADA AD-1
AMSTECH AW6L
CHMER EQ640L
CHMER G64F
CHMER G64S
CHMER GX640L+
CHMER RV653L
CHMER RX1063F
CHMER RX1063S
CHMER RX1283S
CHMER RX853F
CHMER RX853S
CONCORD DK7720 VC
CREATOR CW640
CREATOR CW640S
EASTAR CW-70
EASTAR WI-30E
EASTAR WI-50E
EASTAR WI-60E
EASTAR WI-70E
EASTAR WI-90E
EXCETEK V1060
EXCETEK V2000
EXCETEK V650
EXCETEK V650G
EXCETEK V850G
FRANK PHOENIX CW-50
GROMAX W-V1280
GROMAX W-V650
GROMAX W-V750
KENT USA WFI-30
Wire-Cut EDMs can cut plates as thick as 300 mm and are ideal for creating punches, tools and dies from exotic hard metals that are difficult to machine with conventional methods. They can machine...
KENT USA WFI-50
Wire-Cut EDMs can cut plates as thick as 300 mm and are ideal for creating punches, tools and dies from exotic hard metals that are difficult to machine with conventional methods. They can machine...
KENT USA WFI-60
Wire-Cut EDMs can cut plates as thick as 300 mm and are ideal for creating punches, tools and dies from exotic hard metals that are difficult to machine with conventional methods. They can machine...
KENT USA WFI-70
Wire-Cut EDMs can cut plates as thick as 300 mm and are ideal for creating punches, tools and dies from exotic hard metals that are difficult to machine with conventional methods. They can machine...
KENT USA WFI-90
Wire-Cut EDMs can cut plates as thick as 300 mm and are ideal for creating punches, tools and dies from exotic hard metals that are difficult to machine with conventional methods. They can machine...
KENT USA WSI-1160H
H-Type Moving Column Series features magnet power clutch wire receiving systems, an ATW auto threading wire system, permanent generator control system for wire tension stability and accurate linear...
KENT USA WSI-430
Wire-Cut Submerge Type EDMs are excellent at maintaining stable part and lower arm, fixture and worktable temperatures and thus resulting in straighter, more accurate cuts. These EDMs are the way ...
KENT USA WSI-530
Wire-Cut Submerge Type EDMs are excellent at maintaining stable part and lower arm, fixture and worktable temperatures and thus resulting in straighter, more accurate cuts. These EDMs are the way ...
KENT USA WSI-640
Wire-Cut Submerge Type EDMs are excellent at maintaining stable part and lower arm, fixture and worktable temperatures and thus resulting in straighter, more accurate cuts. These EDMs are the way ...
KENT USA WSI-860H
H-Type Moving Column Series features magnet power clutch wire receiving systems, an ATW auto threading wire system, permanent generator control system for wire tension stability and accurate linear...
KINGRED KD400CL
Item KD400CL Travel of X/Y/Z 320×400×300 mm Table size 435×650 mm Cut taper/thickness ±3°/80 °/mm Cut accuracy Octagon ±0.005 mm Taper ±0.015 mm Max. cut speed 180 mm2/min Best Surface F...
KINGRED KD400GL
KINGRED KD400ZL
1. Parameters of CNC wire cut EDM KD400ZL Item Unit KD400ZL Working table travel mm 320×400 Working table dimension mm 435×650 Max. Workpiece thickness(Z axis stroke) mm 300 Max. angle of taper cu...
KINGRED KD500CL
Item KD500CL Travel of X/Y/Z 400×500×300 mm Table size 520×800 mm Cut taper/thickness ±3°/80 °/mm Cut accuracy Octagon ±0.005 mm Taper ±0.015 mm Max. cut speed 180 mm2/min Best Surface F...
