WYJC GH-1840

Avg. Rating:
Write a Review
Type:Engine Lathes
Price:Contact Sales Rep.


Swing:17.72 "
Spindle Bore:3.15 "
RPM:1600 rpm
Swing Over Cross Slide:11.22 "

Product Overview

床身上最大工件回转直径Max.Swing.over bed Φ450(18〞) mm
中拖板上最大工件回转直径Max.Swing.over cross slide Φ285(11.2〞) mm
马鞍上最大工件回转直径Max.Swing.over gap Φ696(27.4〞) mm
最大加工长度Max.Swing.over 1000(40〞), 1500(60〞) mm
床身宽度 Bed width 340 mm
主轴内孔锥度Taper of spindle bore MT#6
主轴通孔直径spindle bore Φ80(3-1/8〞) mm
主轴转速级数Steps of spindle speeds 12steps
主轴转速范围Range of spindle speeds 40-1600rpm r/min
主轴端部Spindle nose D-8
公制螺纹Metric thread range 0.1-144(41kinds) mm
英制螺纹Inch screw thread range 2~112(60kinds) TPI
径节螺纹Inch screw thread range 4~112(50kinds) DP
模数螺纹Inch screw thread range 0.1~7(34kinds) MP
纵向进给量范围Range of longitudinal feeds 0.0325-1.76(0.0012-0.0672〞in/rev) mm
横向进给量范围Range of cross feeds 0.014-0.736(0.0005〞-0.0288〞in/rev) mm
主丝杆直径Diameter of leadscrew Φ36(1.41〞) mm
主丝杆螺距Pitch thread of leadscrew 6(4T.P.I) mm
Max.cross slide travel 220(9〞) mm
Max.compiund slide travel 120(4-3/4〞) mm
尾架套筒行程el of tailstock quill 13(5〞) mm
尾架套筒直径Diameter of tailstock quill Φ70(2-3/4) mm
尾架套筒孔锥度Taper of tailstock quill MT#4
主电机功率Main motor power 5.5(7-1/2HP) Kw

Wuyi Machine Tool Manufacturing Co., Ltd.

About Wuyi Machine Tool Manufacturing Co., Ltd.

Wuyi Machine Tool Manufacturing Co., Ltd. is one of the key machine tool manufacturers in Zhejiang Province

WYJC GH-1840

Looking to Purchase a New WYJC GH-1840?