MACHINE TOOL TYPE C6266(A)
CAPACITY
Swing Over Slide Φ660mm
Swing Over Cross Bed Φ440mm
Swing in Gap Φ900mm
Length of Gap 250mm
Center Height 330mm
Distance Between Centers 1500mm
Width of Bed 400mm
Max. Section of Tool 25mm × 25mm
Max. Travel of Cross Slide 368mm
Max. Travel of Compound Rest 230mm
HEADSTOCK
Spindle Bore Φ105mm
Spindle Nose D1-8
Taper of Spindle Bore Φ113mm(1:20)/MT5
Spindle Speed Step 16
Range of Spindle Speed 25～1600rpm
FEEDS AND THREADS
Leadscrew Pitch Φ40mm×2T.P.I. or Φ40mm×12mm
Inch Threads Range 7/16～80T.P.I. (54 kinds)
Metric Threads Range 0.45～120mm (54 kinds)
Diametrical Pitches Range 7/8～160DP (42 kinds)
Module Pitches Range 0.25～60MP (46 kinds)
Longitudinal Feeds Range in Metric Lead Screw 0.044～1.48mm/rev (25 kinds)
Longitudinal Feeds Range in Inch Lead Screw 0.00165"～0.05497"/rev (25 kinds)
Cross Feeds Range in Metric Lead Screw 0.022～0.74mm/rev (25 kinds)
Cross Feeds Range in Inch Lead Screw 0.00083"～0.02774"/rev (25 kinds)
TAILSTOCK
Travel of Tailstock Sleeve 235mm
Dia. of Tailstock Sleeve Φ90mm
Morse Taper of Tailstock Sleeve MT5
MOTOR
Power of Main Motor 7.5kW(10HP)
Power of Coolant Pump 0.09kW (1/8HP)