BECHE DGH-40
(Schloemann) Beche DGH 40 Ton ( Revamped by Schuler group 2019) Manufacturer: BECHE (Schloemann) Type: DGH 40 YOM: Revamped 2019 Machine Number: 2412-HW Including 12 Ton Wellman manipulator Impac...
BLISS S-2750-4R-72-144
Manufacturer: BLISS Model: S-2750-4R-72-144 YOM: 1996 Forging Press of 2.750 T Revamped 2016, last operated 20 December 2022 Including 5 Ton Wellman manipulator Main Features 1 - Rated force: 2,50...
CLEARING 3000 TON HYD FORGING PRESS
3000 Ton, 18" Stroke, 50" Stroke, 60" x 60" Bed, 75 HP
EITEL RK1250
1250Ton EITEL RK1250 Double-Column Hydraulic Forging Press Built 1976 in Germany Stroke of ram: 700mm Daylight Stroke up/down: 1500/800mm Table and Ram size (FxR/LxR): 1250/1250mm Center Distance o...
EUMUCO SP100C
DAYLIGHT 700 mm STROKES 85 n°/min STROKE 250 mm TABLE SIZE 1.240 x 850 mm RAM SIZE 790 x 790 mm TABLE ADJUSTMENT 17,5 mm UPPER EJECTOR STROKE 20 mm LOWER EJECTOR STROKE 25 mm ENGINE POWER 60 cv
FUJICAR PCF-630-65-70
Hot Forging Press Make : Fujicar, Japan Model : PCF-630-65-70 Year : 1980's Capacity : 630 Ton Slide stroke : 200 mm Speed : 100 SPM Die height : 490 mm Slide adjustment : 12 mm Bolster size : 650 ...
FUKUI MSF 1000
USED FUKUI 1,000 TON MECHANICAL SINGLE CRANK COLD FORGING PRESS, Stock# 11057, Year: 1991
HBE
HYDRAULIC FORGING PRESS 4200
It is an hydraulic press (water at max 220 atm from the high pressure line) with a force of 4200 tons. It was maintained (changing columns, crossbar, bench, structure in general) many times and rev...
LAMBERTON
DAYLIGHT 1.350 mm, TABLE SIZE 1.100x1.300 mm
MACRODYNE MPFG400/400
400/400 TON (2013) MACRODYNE MODEL #MPFG400/400 HYDRAULIC HOT FORGING PRESS
NATIONAL 1000 MAXI PRES
(1) Used 1000 Ton National Maxi Press
NATIONAL MACHINERY
4,000 Ton National forging press line
SMERAL LZK 2500
SMERAL LZK 2500 Hot Forging press Fully refurbished in 2024* Capacity: 2500 Ton Speed: 65 SPM, continuous mode Ram/Slide Stroke: 320.00mm Ram/Slide Adjustment: 10.00mm Shut Height (Ram/Slide Down, ...
TMP VORONEZH K8544
VORONEZH K8544 Hot Forging press YEAR : 1980 / 2008 OVERHAUL AND INSTALLED FORCE : 2500ton RAM STROKE : 350 mm RAM SIZE : 1120X1070 mm TABLE OVERALL SIZE : 1400X1200 mm NUMBER OF STROKES IN CONTIN...
TMP VORONEZH KB8042
TOPTECH SMAC MACHINERY APA MODEL
with high ridily design in machine frame , the machine body is welded of quality steel sheet and treated by tension elimination improve stability and reliability of precision of the machine
KOMATSU -- UNSPECIFIED --
Forging Press Komatsu MKN-300
KOMATSU -- UNSPECIFIED --
Forging Press Komatsu MKN-160
WARCO 100-2-90C SSDC
Press was re-built in 2018 and never ran since then. Warco press was part of a federal machine. Both were bought out by bcn technical services . 100 ton capacity 15'' total stroke 20/23 spm sdav=2...
WATERBURY FARREL 1016 ICOP
Waterbury Farrel 1016 ICOP Eyelet Transfer Press W/3" Stroke & Arc-Trol Die Protection Make: Waterbury Farrel Model: 1016 ICOP Stroke: 3" Shut Height: 2.75 To Top Of Die Shoe Capable Of Drawin...
WATERBURY FARREL 1210 ICOP
• Press is in great running condition. On shop floor now making parts • Transfer slide is new and an updated design using adjustable fingers • Waterbury Twin Disc Clutch • Cup Hold Down set up inc...
WEINGARTEN PSS300
STROKE 480 mm, STROKES 33-45 n°/min, SCREW 300 mm, TABLE SIZE 700x800 mm, SHUT HEIGHT 670 mm, ENGINE POWER 50 kW
WETORI ISS-1000
WETORI COLD FORGING 1000T Year 2000
WILKINS & MITCHELL S1-1250-42-48
1250ton 2 machines are available.