Généralement utilisé pour couper des plaques et de faire des coups de poing, des outils et meurt de métaux durs.
1 - 25 de 95 Machine
Modèle / DescriptionCourse axe XCourse axe YPrix
thumb
ACCUTEX AU-300I
2 photoAttachement
Nuevo Leon, Mexique
13.7 in9.8 in
thumb
ACCUTEX SP-600I
1 photoAnnée: 2013
accutex model sp-600i cnc wire edm, s/n sg113007, new 2013, windows based pc control, 5-axis, 23.6” x 15.8” x 15.8” x 3.9” x 3.9” travels, auto threader, taper cut, filtration, chiller, f.o.b. dayton, ohio submerged cut................................$69,500.00 contact larry 1-937-477-7712...
Ohio, Etats-Unis
23.6 in15.8 in
$69,500.00 USD
thumb
AGIE AGIECUT 100
10 photoAnnée: 1987
machine is in running condition. will sell complete machine or just parts. call dennis sharples with any questions 908-752-0042
New Jersey, Etats-Unis
$2,500.00 USD
thumb
AGIE AGIECUT 150F
2 photoVidéoAnnée: 1993
agie agiecut 150 f wire cutting machine
Pologne
11.811 in7.874 in
thumb
AGIE AGIECUT 200D + SF
8 photoVidéoAnnée: 1995A la vente aux enchère
lot 40: agiecut 200d+sf cnc wire electronic discharge machine (edm). agie agiematic cd cnc control, pendent mounted floppy drive, rs232 port. agie rc 123 remote jog handle, dielectric tank with dielectric chiller, u & v axises, auto threading, parts sketching system, tensioner adjustment control...
Minnesota, Etats-Unis
15.75 in9.843 in
thumb
AGIE CHALLENGE 3
6 photoAnnée: 2000
agie challenge 3 - 2000 wire cutting edm machine state: machine will be sold refurbished. x-axis travel (mm): x-axis travel (mm): x-axis travel (mm): worktank length: worktank width: worktank height: max. workpiece length: max. workpiece width: max. workpiece height: max. workpiece weig...
France
thumb
AGIE CLASSIC 3S GOLD EDITION
3 photoAnnée: 2005
under power and available for inspection.
Illinois, Etats-Unis
19.7 in13.7 in
thumb
AGIE PROGRESS 3
4 photoAnnée: 2006
agie progress-3,19.77"x,13.77"y,16.8"z,u/v-2.75",intelligence/ps,agievision,2006
New York, Etats-Unis
19.7 in13.7 in
thumb
AGIE PROGRESS 3
7 photoAnnée: 2006
agie progress 3 - 2006 wire cutting edm machine state: machine will be sold refurbished. x-axis travel (mm): x-axis travel (mm): x-axis travel (mm): worktank length: worktank width: worktank height: max. workpiece length: max. workpiece width: max. workpiece height: max. workpiece weigh...
France
19.7 in13.7 in
thumb
AGIECHARMILLES AC PROGRESS VP3
3 photoAttachementAnnée: 2011
swiss made v-guides (.006" - .013") automatic workpiece probe 4-sided hard stainless table fine finish - 4 rms up to 55 lbs. spool wire chopper voltage transformer option: installation warranty
Ohio, Etats-Unis
19.7 in13.77 in
thumb
AGIECHARMILLES AGIECUT CLASSIC V 2
1 photoVidéoAnnée: 2007
key points * four sided table with universal clamping frame. * wire sizes ranging from 0.006" - 0.013". finishes of 0.2 ra. * ipg-v generator has 2 power modules and a modern design and technology that delivers finer spark gap for better part geometry and surface finish. it also ha...
Etats-Unis
13.77 in9.84 in
thumb
AGIECHARMILLES CUT 20 P
1 photoAnnée: 2010
** 800 hours use **
Illinois, Etats-Unis
13.8 in9.8 in
AGIECHARMILLES CUT 300 SP
Année: 2011
new arrival. available for inspection, wixom,mi
Michigan, Etats-Unis
21.65 in13.77 in
thumb
AGIECHARMILLES CUT 30P
8 photoAnnée: 2011
machine c/w large spool option,intuitive graphical user interface, plug & play machine concept, speed- orientated technologies, outstanding generator performance. clean!
Ontario, Canada
23.6 in15.7 in
thumb
AGIECHARMILLES PROGRESS V4
1 photoAnnée: 2008
key features * four sided table with universal clamping frame. * wire sizes from 0.006" - 0.013". * finishes of 0.2 ra. (8 micro inch) * acvision 5 control runs on windows xp. this control delivers more power with less space required. * ipg-vp dual generator has 4 in ser...
Etats-Unis
31.5 in21.65 in
thumb
AGIECHARMILLES +GF+ CUT 3000 TWIN WIRE
10 photoAnnée: 2011
agie charmilles +gf+ cut3000 - 2011 wire cutting edm machine [embed]https://www.youtube.com/watch?v=9zauw8r9cqa[/embed] state: machine will be sold refurbished. x-axis travel (mm): x-axis travel (mm): x-axis travel (mm): worktank length: worktank width: worktank height: max. workpiece ...
France
thumb
CHARMILLES 330F CNC
6 photoAnnée: 1999
charmilles 330f cnc wire-type edm, submersible, awt, 17,513 total time on
New Jersey, Etats-Unis
thumb
CHARMILLES ROBOFIL 1020
6 photoAnnée: 1996
Geneve, Suisse
12.6 in8.661 in
thumb
CHARMILLES ROBOFIL 2020SI
18 photoAnnée: 1996
make: charmilles wire edm mfg: 1996 380/400 volts 12 kva taper angle: 0-30 degrees max workpiece weight: 1,706 lbs max workpiece dimensions: 43.3" x 29.9" x 14.1" x-axis travel: 17.7" y-axis travel: 12.59" z-axis travel: 6.3" standard wire diameter capacity: 0.004...
Connecticut, Etats-Unis
12.5 in8.6 in
$8,900.00 USD
thumb
CHARMILLES ROBOFIL 230F
3 photoAnnée: 2001
charmilles robofil 230f - 2001 wire cutting edm machine state: machine will be sold refurbished. x-axis travel (mm): x-axis travel (mm): x-axis travel (mm): worktank length: worktank width: worktank height: max. workpiece length: max. workpiece width: max. workpiece height: max. workpie...
France
13.78 in8.66 in
thumb
CHARMILLES ROBOFIL 240
2 photoAnnée: 2003
please request quote for full details. under power for inspection. recently pm serviced.
Illinois, Etats-Unis
13.77 in8.66 in
thumb
CHARMILLES ROBOFIL 240SL
4 photo
Illinois, Etats-Unis
39.37 in21.65 in
thumb
CHARMILLES ROBOFIL 290
1 photoAnnée: 1998
Illinois, Etats-Unis
15.7 in9.8 in
thumb
CHARMILLES ROBOFIL 290
1 photoAttachementAnnée: 1998
this machine is offered refurbished. installation, training and warranty available. request quotation for full details.
Illinois, Etats-Unis
15.7 in9.8 in
thumb
CHARMILLES ROBOFIL 300
2 photoAnnée: 1994
machine is under power and available for inspection.
Illinois, Etats-Unis
15.75 in9.85 in