Gantry Centri di (incld. Bridge & Doppia colonna)BRETON MATRIX K80 5 AXIS
AustraliaPanoramica
Marca
Modello
Numero id. #
599720
Condizione
Eccellente
Anno
2004
Luogo
Australia
Disponibilità
NC9937
Recently removed from a local manufacturer this large Gantry Mill is available at a fraction of its replacement cost. Only sold as it was no longer required.
Table length 8500
Table width 3500
24 Tool Changer
Reinshaw Probe
Having been used in the aircraft industry it is extremely accurate, Accuracy Report is available.
A AXIS ROTATION + - 105 deg
C Axis Continuous Rotation
24000 rpm Main Spindle
Also having regular service, as well as having calibration regularly.
Video shows-
Covering Spindle rotation
Converti specifiche in sistema metrico
X | 314.96" |
Y | 153.54" |
Z | 51.181" |
Potenza | 26.8 hp |
RPM | 5000-13000 |
# ATC | 24 |
Larghezza tavolo | 137.8" |
Table-L | 334.65" |
Dotato
Reinshaw Probe
Spec Sheet
DESCRIPTION M.U. MATRIX 1300 K80
Interpolated axes 5
Table length mm 8500
Table width mm 3500
Table load capacity kg 10000
T-shaped groove (width / pitch) mm 22 / 250
“X” axis travel mm 8000
“Y” axis travel mm 3900
“Z” axis travel mm 1300
Spindle nose / work table distance
Half-fork head mm
Whole-fork head mm 1950 ± 50
“A” axis rotation
Half-fork head mm
Whole-fork head mm ± 105°
“C” axis rotation Continuous
Spindle power kW 20
Spindle torque
Half-fork head N/m
Whole-fork head N/m 38
Spindle speed rotation
Half-fork head rpm
Whole-fork head rpm 24000
Speed range at constant power
Half-fork head rpm
Whole-fork head rpm 5000 ÷ 13000
“X” axis speed rpm 20
“Y” axis speed rpm 30
“Z” axis speed m/min 20
“A” axis speed
Half-fork head rpm
Whole-fork head rpm 12
“C” axis speed
Half-fork head rpm
Whole-fork head rpm 20
Total installed power kW 75
Sound pressure level equiv. to 1 m. while working db (A) 65
Visualizza altri annunci per questo tipo
VISION WIDE VB3016
Gantry Centri di (incld. Bridge & Doppia colonna)
VISION WIDE VF4000
Gantry Centri di (incld. Bridge & Doppia colonna)
QUICKMILL INTIMIDATOR 120
Gantry Centri di (incld. Bridge & Doppia colonna)
OKUMA MCV 21-41
Gantry Centri di (incld. Bridge & Doppia colonna)
Visualizza altri annunci per questa marca
BRETON XCEEDER 1200 RTHD
Centri di lavoro verticali (5 assi o più)
BRETON MATRIX 800 K/25
Centri di lavoro verticali (5 assi o più)
BRETON
Gantry Centri di (incld. Bridge & Doppia colonna)
BRETON NC400
Attrezzature per lavorazione pietra