Torni paralleli in vendita
Mostra Macchine 1 - 50 di 74 in totale
thumb
Torni paralleli

MONARCH 14C

Torni paralleli

14″ x 54″ Monarch 14C Engine Lathe – 10″ Chuck, 3-Jaw, Available Immediately

Diametro rotante:16.0 in
Centri:126.0 in
Stati Uniti | Buona | MONARCH
5 Foto
Anno: 1945
thumb
Torni paralleli

COLCHESTER 8052

Torni paralleli

17"x100"cc COLCHESTER Engine Lathe

Diametro rotante:17.0 in
Centri:102.0 in
Illinois, Stati Uniti | Buona | COLCHESTER
5 Foto
Anno: 1988
thumb
Torni paralleli

SOUTH BEND 17 TURN-NADO

Torni paralleli

PREOWNED SOUTH BEND ENGINE LATHE, MODEL #: TURN-NADO 17 in x 54 in , S/N: 69GJ1801, YEAR: 1969

Diametro rotante:17.0 in
Centri:106.0 in
Iowa, Stati Uniti | Eccellente | SOUTH BEND
10 Foto
Anno: 1969
thumb
Torni paralleli

AMERICAN 18" X 102" ENGINE LATHE

Torni paralleli

Taper attachment, Steady Rest

Diametro rotante:18.0 in
Centri:102.0 in
Stati Uniti | AMERICAN
6 Foto
Anno: 1980
thumb
Torni paralleli

LEBLOND 18X100

Torni paralleli

Diametro rotante:18.0 in
Centri:100.0 in
Stati Uniti | LEBLOND
4 Foto
thumb
Torni paralleli

LEBLOND MAKINO REGAL SERVO-SHIFT

Torni paralleli

Can be seen under power in our PA warehouse!

Diametro rotante:19.0 in
Centri:102.0 in
Pennsylvania, Stati Uniti | Eccellente | LEBLOND MAKINO
10 Foto
Anno: 1990
thumb
Torni paralleli

AMERICAN PACEMAKER 20X98 ENGINE LATHE

Torni paralleli

(3) Chucks, Taper Attachment, Steady Rest, 30HP

Diametro rotante:20.0 in
Centri:98.0 in
Stati Uniti | AMERICAN
9 Foto
thumb
Torni paralleli

EUROPEAN LION 20-MT-3, 20" X 120"

Torni paralleli

European built, heavy duty and precise 20" x 120" engine lathe with 3.2" spindle bore.

Diametro rotante:20.0 in
Centri:120.0 in
California, Stati Uniti | Nuovo in stock | EUROPEAN LION
2 Foto
thumb
Torni paralleli

STANKO ZM50

Torni paralleli

Diametro rotante:20.0 in
Centri:120.0 in
Canada | Eccellente | STANKO
9 Foto
Anno: 2019
thumb
Torni paralleli

SUMMIT 20-4X120

Torni paralleli

Used summit 20-4x120 Engine Lathe

Diametro rotante:20.0 in
Centri:120.0 in
Maine, Stati Uniti | SUMMIT
2 Foto
thumb
Torni paralleli

VICTOR 20120

Torni paralleli

20" Swing 120" Centers Victor 20120 ENGINE LATHE, Inch/Metric, Gap, 3-Jaw, Aloris Toolpost, Steady

Diametro rotante:20.0 in
Centri:120.0 in
Illinois, Stati Uniti | VICTOR
10 Foto
Video
Anno: 1980
thumb
Torni paralleli

CLAUSING COLCHESTER 21

Torni paralleli

Description 21” x 120” Used Clausing Geared Head Lathe Specifications: Swing Over Bed Ways 21″ Swing Over Cross-Slide 14” Distance Between Center 120” Spindle Hole 3-1/2″ Spindle Motor 12.5 HP Spin...

Diametro rotante:21.0 in
Centri:120.0 in
Ohio, Stati Uniti | Buona | CLAUSING COLCHESTER
4 Foto
thumb
Torni paralleli

LEBLOND 19" REGAL SERVO SHIFT

Torni paralleli

19" X 102" Used LeBlond Servo Shift Engine Lathe

Diametro rotante:21.0 in
Centri:102.0 in
Texas, Stati Uniti | Buona | LEBLOND
9 Foto
Anno: 1977
thumb
Torni paralleli

SHARP 22100B

Torni paralleli

SHARP Model 22100B Engine Lathe 22" x 100" Geared headstock, 12 Speeds, 15 HP 22100B,22120B, 22160B, 26100B, 26120B, 26160B Lathes 22" and 26" swing over bed 10-1,000 rpm (12 speeds), 4.5” bore, ...

Diametro rotante:22.0 in
Centri:100.0 in
California, Stati Uniti | Nuovo in stock | SHARP
1 Foto
Video
Anno: 2023
thumb
Torni paralleli

TARNOW TUJ 50M/3000

Torni paralleli

22" Swing 120" Centers Tarnow TUJ-50M 3000 ENGINE LATHE, Inch/Metric,Gap,Taper,3&4 Jaw,3.5"Hole,Steady,15HP

Diametro rotante:22.0 in
Centri:120.0 in
New Jersey, Stati Uniti | TARNOW
10 Foto
Video
Anno: 1985
thumb
Torni paralleli

TARNOW TUJ 50M/3000

Torni paralleli

22" x 120" Tarnow Model TUJ-50M Engine Lathe, Hardened & Ground Bed Ways, In/Met Threading, 18" 4-Jaw Chuck, 12-1/2" 3-Jaw Chuck, Steady Rest, Taper Attachment, 31-1/2" Swing in Removable Gap, D1-1...

Diametro rotante:22.0 in
Centri:120.0 in
Massachusetts, Stati Uniti | Buona | TARNOW
10 Foto
Video
Anno: 1985
thumb
Torni paralleli

CLAUSING 21" X 108" ENGINE LATHE

Torni paralleli

23" Swing, 108" Centers, 3.5: Bore

Diametro rotante:23.0 in
Centri:108.0 in
Stati Uniti | CLAUSING
1 Foto
thumb
Torni paralleli

EUROPEAN LION 23-MT, 23 X 120

Torni paralleli

European built, heavy duty and precise 23" x 120" engine lathe with 4" spindle bore.

Diametro rotante:23.0 in
Centri:120.0 in
California, Stati Uniti | Nuovo in stock | EUROPEAN LION
2 Foto
thumb
Torni paralleli

TOOLMEX TUR 630M/80

Torni paralleli

Diametro rotante:23.0 in
Centri:120.0 in
Illinois, Stati Uniti | Buona | TOOLMEX
9 Foto
Anno: 2007
thumb
Torni paralleli

ACER 24120G

Torni paralleli

Acer Dynamic 24120G Lathe   Ampere meter for indicating power consumption. Magnetic multiple-disc clutches in the headstock are used for efficient starting and reversing the spindle. Ma...

Diametro rotante:24.0 in
Centri:120.0 in
Stati Uniti | Nuovo in stock | ACER
2 Foto
thumb
Torni paralleli

AMERICAN MODEL STYLE D

Torni paralleli

AMERICAN (#0088) ENGINE LATHE, MODEL STYLE D, 18” SPINDLE SIZE, 120” MAX C-C DISTANCE, 17” OVER CARRIAGE, 24” MAX OVER WAYS, TAPER ATTACHMENT, 2 STEADY RESTS, 20 H.P., SPINDLE SPEED 15-100 RPM, S/N...

Diametro rotante:24.0 in
Centri:120.0 in
Pennsylvania, Stati Uniti | AMERICAN
3 Foto
thumb
Torni paralleli

MAZAK HEAVY DUTY 24

Torni paralleli

24" x 100" Mazak Heavy Duty Manual Engine Lathe

Diametro rotante:24.0 in
Centri:120.0 in
Texas, Stati Uniti | Buona | MAZAK
7 Foto
thumb
Torni paralleli

SIRCO PA 24

Torni paralleli

24" X 120" Sirco Engine Lathe

Diametro rotante:24.0 in
Centri:120.0 in
Texas, Stati Uniti | Buona | SIRCO
6 Foto
thumb
Torni paralleli

STANKO 1M63

Torni paralleli

Stan Canada Industrial Machine Tools and Service All new and used machines are internally and externally checked by our machinist to make sure that we properly deliver the quality of the equipment...

Diametro rotante:24.764 in
Centri:118.0 in
Alberta, Canada | Buona | STANKO
10 Foto
thumb
Torni paralleli

DAEWOO-IKEGAI DA25

Torni paralleli

This lathe runs really well and can be seen under power.

Diametro rotante:25.0 in
Centri:120.0 in
Ohio, Stati Uniti | Eccellente | DAEWOO-IKEGAI
6 Foto
Anno: 1981
thumb
Torni paralleli

EUROPEAN LION 25-CU, 25" X 120"

Torni paralleli

European built, heavy duty 25" swing engine lathe with 4" spindle bore.

Diametro rotante:25.0 in
Centri:120.0 in
California, Stati Uniti | Nuovo in stock | EUROPEAN LION
2 Foto
thumb
Torni paralleli

LODGE & SHIPLEY 2013

Torni paralleli

Diametro rotante:25.0 in
Centri:102.0 in
Alberta, Canada | LODGE & SHIPLEY
4 Foto
thumb
Torni paralleli

TOOLMEX TUR 630

Torni paralleli

This lathe is super clean and comes equipped with a chip conveyor and Siemens 810D. It has very low hours, has been well-maintained. To the best of our knowledge, all details listed below are dee...

Diametro rotante:25.0 in
Centri:118.11 in
Idaho, Stati Uniti | Eccellente | TOOLMEX
10 Foto
Anno: 2007
thumb
Torni paralleli

CUTMASTER BIG-JOE

Torni paralleli

Diametro rotante:26.0 in
Centri:120.0 in
California, Stati Uniti | CUTMASTER BIG-JOE
3 Foto
thumb
Torni paralleli

LEBLOND REGAL

Torni paralleli

LeBlond Regal 26" x 132" Gap Bed Engine Lathe

Diametro rotante:26.0 in
Centri:132.0 in
Michigan, Stati Uniti | Buona | LEBLOND
8 Foto
Anno: 1963
thumb
Torni paralleli

LODGE & SHIPLEY RXE2516

Torni paralleli

Used LODGE & SHIPLEY RXE-2516 Precision Lathe (Used) Swing over carriage 26-1/2(673)、Swing over cross slide 20(508)、Center distance 120"(3048)、Pulley speed 845、spindle hole 65mm、4jaw chuck 550φ、mai...

Diametro rotante:26.5 in
Centri:120.0 in
Taiwan  | LODGE & SHIPLEY
6 Foto
thumb
Torni paralleli

STANKO 1M635

Torni paralleli

27.5"X 120" Stanko Heavy Duty Engine Lathe Model 1M635

Diametro rotante:27.0 in
Centri:118.0 in
Texas, Stati Uniti | Buona | STANKO
9 Foto
Anno: 1990
thumb
Torni paralleli

STANKO 1M635

Torni paralleli

27.5"X 120" Stanko Heavy Duty Engine Lathe Model 1M635

Diametro rotante:27.0 in
Centri:118.0 in
Texas, Stati Uniti | Buona | STANKO
9 Foto
Anno: 1990
thumb
Torni paralleli

TIMEMASTER SUPER M

Torni paralleli

27"x120"cc TIMEMASTER Engine Lathe

Diametro rotante:27.0 in
Centri:120.0 in
Illinois, Stati Uniti | Buona | TIMEMASTER
5 Foto
Anno: 1980
thumb
Torni paralleli

STANKO 1M635

Torni paralleli

27.5"X 120" Stanko Heavy Duty Engine Lathe Model 1M635

Diametro rotante:27.5 in
Centri:118.0 in
Texas, Stati Uniti | Buona | STANKO
1 Foto
thumb
Torni paralleli

PBR TM-35

Torni paralleli

Centre distance: 3000 mm Swing: 700 mm over bed / 425 mm over cross slide Spindle speed: 0 - 2000 rpm Spindle bore: 105 mm Heidenhain Digital readout: On X + Z-axis Country of origin: ...

Diametro rotante:27.559 in
Centri:118.11 in
Friesland, Olanda | Buona | PBR
8 Foto
Video
thumb
Torni paralleli

EUROPEAN LION C10T

Torni paralleli

Folio: MV227248 LION C10T Torno Capacidad: 25" x 120" Volteo sin Escote: 33" Largo de Escote: 16" Paso de Barra: 4" Chuck: 3 Mordazas Diametro de Chuck: 15" Velocidad: 10 - 1,500 RPM Con Taper o...

Diametro rotante:28.0 in
Centri:120.0 in
Nuevo Leon, Messico | Eccellente | EUROPEAN LION
6 Foto
Video
Anno: 2010
thumb
Torni paralleli

STANKO 1M63B

Torni paralleli

SPECIFICATIONS: 424 Serial: 4691 Mfg: 1991 Spindle Speed: 10 - 1250 rpm (6 Ranges) Spindle Bore: 3-3/8" Chuck: 4 Jaw Chuck - 20" Ø Swing: 28" Length: 120" Leadscrew: 2 tpi Steady Rest: 17" Ø Taper ...

Diametro rotante:28.0 in
Centri:120.0 in
Alberta, Canada | Buona | STANKO
10 Foto
Anno: 1991
thumb
Torni paralleli

STANKO 1M63B

Torni paralleli

Contact Us Phone: 1(780) 434-0099 Email: Sales@stancanada.com

Diametro rotante:28.0 in
Centri:120.0 in
Alberta, Canada | Eccellente | STANKO
7 Foto
thumb
Torni paralleli

STANKO 1M63B

Torni paralleli

Contact Us (780) 465-3667 sales@stancanada.com www.stancanada.com

Diametro rotante:28.0 in
Centri:120.0 in
Alberta, Canada | Buona | STANKO
10 Foto
thumb
Torni paralleli

WHACHEON HL720

Torni paralleli

2-Axis Sony DRO Rapid Traverse Thread Dial Extra Large Steady Rest 15" Buck Adjustable 3-Jaw chuck

Diametro rotante:28.3 in
Centri:120.0 in
Stati Uniti | Buona | WHACHEON
10 Foto
Anno: 1999
thumb
Torni paralleli

ACER DYNAMIC 29120G

Torni paralleli

Acer Dynamic 29120G Engine Lathe

Diametro rotante:29.0 in
Centri:120.0 in
Stati Uniti | ACER
3 Foto
thumb
Torni paralleli

EUROPEAN LION 30-CU, 30 X 120

Torni paralleli

GREAT VALUE big swing lathe. European built, heavy duty 30" swing engine lathe with 4" spindle bore.

Diametro rotante:30.0 in
Centri:120.0 in
California, Stati Uniti | Nuovo in stock | EUROPEAN LION
2 Foto
thumb
Torni paralleli

KINGSTON HD-3000

Torni paralleli

KINGSTON 30 x 120" Removable Gap Bed Engine Lathe. Fully Installed in Shop Under Power for Inspection! Power Feeds, 2-Chucks Included 15" 4-Jaw, 12" 3-Jaw Top Condition!

Diametro rotante:30.0 in
Centri:120.0 in
Michigan, Stati Uniti | Eccellente | KINGSTON
10 Foto
Video
Anno: 1978
Torni paralleli

KINGSTON HI-29120

Torni paralleli

Kingston 8.5" Hollow Spindle Engine Lathe, taper, threading

Diametro rotante:30.0 in
Centri:120.0 in
Texas, Stati Uniti | Eccellente | KINGSTON
Anno: 2002
thumb
Torni paralleli

SOUTH BEND 750

Torni paralleli

30" x 108" SOUTH BEND ENGINE LATHE, Model 750, 30" Swing Over Bed, 28" Swing Over Cross Slide, 108" Centers, 21" 4-Jaw Chuck, 4" Thru Hole, Inch/Metric Threading, Steady Rest, New 1997. (2) Machine...

Diametro rotante:30.0 in
Centri:108.0 in
Ohio, Stati Uniti | Eccellente | SOUTH BEND
10 Foto
Anno: 1997
thumb
Torni paralleli

YAMAZAKI MAZAK-30

Torni paralleli

Diametro rotante:30.0 in
Centri:118.0 in
Alberta, Canada | Buona | YAMAZAKI
7 Foto
thumb
Torni paralleli

LEBLOND MAKINO HD3220

Torni paralleli

32" X 120" Used LeBlond Heavy Duty Engine Lathe

Diametro rotante:32.0 in
Centri:120.0 in
Stati Uniti | Buona | LEBLOND MAKINO
7 Foto
Anno: 1981
thumb
Torni paralleli

STANKO 16K40-3

Torni paralleli

SPECIFICATIONS: 410 Chuck: 25" 4 Jaw Chuck (No Jaw) Swing: 34" Length: 140" Speed: 10 - 1250 rpm Serial #: 1171 Power: 220V, 3p, 65A Taper Attachment Lamp & Lubrication 40 Position Quick Change Too...

Diametro rotante:32.0 in
Centri:120.0 in
Alberta, Canada | Eccellente | STANKO
10 Foto
thumb
Torni paralleli

VANGUARD CW6280

Torni paralleli

Diametro rotante:32.0 in
Centri:118.0 in
Texas, Stati Uniti | Usato - Buono | VANGUARD
3 Foto