Hones nuove (118)
Modelli nuovi (118)
Mostra Modelli 1 - 50 di 118 in totale
thumb

BARNES HH-10

Diametro mandrino (max):28.0 in
1 foto
thumb

BARNES HH-12

Diametro mandrino (max):5.5 in
1 foto
thumb

BARNES HH-25

Diametro mandrino (max):42.0 in
1 foto
thumb

BARNES HV-1000

Diametro mandrino (min):0.125 in
Diametro mandrino (max):3.0 in
Corsa (minima):8.0 in
1 foto
thumb

BARNES HV-5000

Diametro mandrino (min):3.0 in
Diametro mandrino (max):10.0 in
Corsa (minima):24.0 in
1 foto
thumb

BARNES HV-8000

Diametro mandrino (min):10.0 in
Diametro mandrino (max):30.0 in
Corsa (minima):24.0 in
1 foto
thumb
thumb
thumb
thumb

CENTURY MACHINE 74H-10

Diametro mandrino (max):20.0 in
Corsa (minima):120.0 in
thumb

CWT LH-100

1 foto

ENGIS 0025-14S

Diametro mandrino (min):0.06 in
Diametro mandrino (max):1.5 in
thumb

ENGIS FPM-3X

Manufacturers of large hydraulic valve bodies face a challenge aligning and finishing the bores once the bodies have been stacked. Engis has designed a three axis single-pass bore finishing system...

1 foto
Brochure
thumb

ENGIS LPM-4000

Our LPM Series range of machines can assist you with finishing a wide range of bore sizes; from 1.5mm to 150mm. Since the bases are standard, manufactured in quantity, and then customized to your a...

1 foto
Brochure
thumb

ENGIS SPM-6000

We have created the SPM Series specifically for job shops running small to medium sized parts. This provides you with a cost effective bore finishing solution with the flexibility to run different ...

Corsa (minima):18.0 in
1 foto
Brochure
thumb

ENGIS SPM-SE-6000

Corsa (minima):18.0 in
1 foto
Brochure
thumb

KENRIE 10HF-2

1 foto
Brochure
thumb

KENRIE 10MVH

1 foto
Brochure
thumb

KENRIE 1MVH

1 foto
Brochure

KENRIE 3MVH

Brochure

KENRIE 5HF-1

Brochure

KENRIE 5MVH

Brochure
thumb

MUTSCHLER MET-2

Diametro mandrino (max):6.0 in
1 foto
thumb

NAGEL ECO 120

Low / Medium Volume ECO Series Standard Honing Machines are designed for both manual tending and full automation. These machines retain the coveted features of the high volume machines but engineer...

Diametro mandrino (min):1.575 in
Diametro mandrino (max):4.724 in
1 foto
Brochure
thumb

NAGEL ECO 180

Low / Medium Volume ECO Series Standard Honing Machines are designed for both manual tending and full automation. These machines retain the coveted features of the high volume machines but engineer...

Diametro mandrino (min):1.575 in
Diametro mandrino (max):7.087 in
1 foto
Brochure
thumb

NAGEL ECO 20

Low / Medium Volume ECO Series Standard Honing Machines are designed for both manual tending and full automation. These machines retain the coveted features of the high volume machines but engineer...

Diametro mandrino (min):0.039 in
Diametro mandrino (max):0.787 in
1 foto
Brochure
thumb

NAGEL ECO 40

Low / Medium Volume ECO Series Standard Honing Machines are designed for both manual tending and full automation. These machines retain the coveted features of the high volume machines but engineer...

Diametro mandrino (min):0.118 in
Diametro mandrino (max):1.575 in
1 foto
Brochure
thumb

NAGEL ECO 80

Low / Medium Volume ECO Series Standard Honing Machines are designed for both manual tending and full automation. These machines retain the coveted features of the high volume machines but engineer...

Diametro mandrino (min):0.394 in
Diametro mandrino (max):3.15 in
1 foto
Brochure
thumb

NAGEL ECO H

Low / Medium Volume ECO Series Standard Honing Machines are designed for both manual tending and full automation. These machines retain the coveted features of the high volume machines but engineer...

Diametro mandrino (min):0.118 in
Diametro mandrino (max):1.575 in
1 foto
Brochure
thumb

NAGEL PVT

Diametro mandrino (min):0.098 in
Diametro mandrino (max):3.15 in
1 foto
thumb

NAGEL VS 10

Diametro mandrino (min):1.181 in
Diametro mandrino (max):11.81 in
1 foto
thumb

NAGEL VS 5

Diametro mandrino (min):0.157 in
Diametro mandrino (max):2.362 in
1 foto
thumb

NAGEL VS 8

Diametro mandrino (min):0.394 in
Diametro mandrino (max):4.724 in
1 foto
thumb

OHIO TOOL WORKS OTW 1000/10HP

The OTW 1000 is offered in two configurations, designed to satisfy honing requirements from 0.50" (12.7mm) or smaller thru 21.0" (533.4mm). The 5.0 HP (3.73 KW) machine is designed for lighter duty...

Diametro mandrino (min):1.0 in
Diametro mandrino (max):21.0 in
1 foto
Video
thumb

OHIO TOOL WORKS OTW 1000/5HP

The OTW 1000 is offered in two configurations, designed to satisfy honing requirements from 0.50" (12.7mm) or smaller thru 21.0" (533.4mm). The 5.0 HP (3.73 KW) machine is designed for lighter duty...

Diametro mandrino (min):0.5 in
Diametro mandrino (max):3.0 in
1 foto
Video
thumb

OHIO TOOL WORKS OTW 3000

Diametro mandrino (min):1.5 in
Diametro mandrino (max):16.0 in
1 foto
Video
thumb

OHIO TOOL WORKS OTW 5000

The OTW 5000 is our heavy duty production machine. For higher stock removal applications, the Model 5000 provides both the power and durability for multi-shift, heavy production applications.

Diametro mandrino (min):2.0 in
Diametro mandrino (max):24.0 in
1 foto
Video