Avvolgitori filo nuove (46)
Modelli nuovi (46)
Mostra 46 Modelli
thumb

HERBORN 4Q

4Q possible (energy recovery) - Power feedback during ramp-down

1 foto
thumb

HERBORN SH 800

Unwinder / winder SPA or SH 800

1 foto
thumb

HERBORN SPA 800

Unwinder / winder SPA or SH 800

1 foto
thumb

HERBORN VBS 250

V ertical - B esprüht - S puler Spools: 250mm - 400mm Finished wire Ø: 0.03-0.10mm Number of moves: 25 Pairs of cones: 3

1 foto
thumb

HERBORN VBS 400

V ertical - B esprüht - S puler Spools: 250mm - 400mm Finished wire Ø: 0.03-0.10mm Number of moves: 25 Pairs of cones: 3

1 foto
thumb

RUFF HKW ON LW90 BASE

The edge winding technology on an LW90 was created and based on a semi-automatic machine version. Due to the high level of experience, the technology could be implemented by using of special wire g...

1 foto
Brochure
thumb

RUFF HKW-R

The HKW-R is a heavy duty special floor winder. This design is a special construction for edge winding applications with not round geometrics inside of the winding product. The HKWR is a very speci...

1 foto
Brochure
thumb

RUFF HKW800 FULL AUTOMATIC

The HKW800 automatic machine is the advancement of the semi-automatic version. It processes the flat wire from the supply spool to the finished winding. The system is equipped with a wire dereeling...

1 foto
Brochure
thumb

RUFF HKW800 SEMI AUTOMATIC

The HKW 800 is a heavy duty floor winder, with a welded iron body. This design is special constructed for edge winding applications. This machine can be used for edge winding product with round geo...

1 foto
Brochure
thumb

RUFF KWM DET

Detection, marking and cutting machine This machine is used for continuous marking and cutting of fl exible or rigid round or fl at materials. It is suitable for extruded cables without internal s...

1 foto
Brochure
thumb

RUFF KWM EXECUTIVE

This automatic high speed spiral winding machine is designed for continuous winding onto endless carrier material with permanent wire pitch or several different lengths with each independent pitch.

1 foto
Brochure
thumb

RUFF KWM EXECUTIVE S

Special spiral winding machine with automatic pitch change and automatic copper wire insertion function This automatic high speed winding machine is designed for continuous winding onto endless ca...

1 foto
Brochure
thumb

RUFF LW05

The LW05 is a light designed bench top machine with an integrated electrical cabinet for all type of linear winding applications. Given small dimension and light construction, it can easily be carr...

1 foto
Brochure
thumb

RUFF LW10

The LW 10 and LW 11 are light designed bench top machines with a separate electrical box for all type of linear winding applications. Given small dimension and light construction, it can easily be ...

1 foto
Brochure
thumb

RUFF LW1000

The LW 1000 is a big heavy duty floor winder, with a welded iron body. This design is for very heavy applications with very strong wires. Required speed and torque range can easily be changed by th...

1 foto
Brochure
thumb

RUFF LW11

The LW 10 and LW 11 are light designed bench top machines with a separate electrical box for all type of linear winding applications. Given small dimension and light construction, it can easily be ...

1 foto
Brochure
thumb

RUFF LW120

The LW 120 is a heavy duty floor winder, with a welded iron body. This design is for heavy and high precision linear winding applications with primary and secondary winding. Required speed and torq...

1 foto
Brochure
thumb

RUFF LW120-RS

The LW 120-RS / LW 180-RS is a heavy duty floor winder, with a welded iron body. This design is for heavy and high precision linear winding applications with primary and secondary winding. Required...

1 foto
Brochure
thumb

RUFF LW15

The LW 15 and LW 16 are bench top machines for all general and high precision linear winding applications. Required speed and torque range can easily changed by the pre installed transmission gears...

1 foto
Brochure
thumb

RUFF LW150

The LW 150 is a heavy duty floor winder, with a welded iron body. This design is for heavy and high precision linear winding applications with primary and secondary winding. Required speed and torq...

1 foto
Brochure
thumb

RUFF LW150 PROGRESSIVE

The LW150-progressive-wire-winding-machine is used to wind high voltage coils for distribution transformers. Simultaneously to the wire winding the layer insulation is built up either cylindrically...

1 foto
Brochure
thumb

RUFF LW16

The LW 15 and LW 16 are bench top machines for all general and high precision linear winding applications. Required speed and torque range can easily changed by the pre installed transmission gears...

1 foto
Brochure
thumb

RUFF LW180-RS

The LW 120-RS / LW 180-RS is a heavy duty floor winder, with a welded iron body. This design is for heavy and high precision linear winding applications with primary and secondary winding. Required...

1 foto
Brochure
thumb

RUFF LW20

The LW 20 and LW 21 are small designed bench top machine for all general and high precision linear winding applications. Required speed and torque range can easily be changed by the pre installed t...

1 foto
Brochure
thumb

RUFF LW21

The LW 20 and LW 21 are small designed bench top machine for all general and high precision linear winding applications. Required speed and torque range can easily be changed by the pre installed t...

1 foto
Brochure
thumb

RUFF LW25-S

The LW 25-S are our high top machine for all general and high precision linear winding applications. The speed up to 12.000 rpm is one of the high lights. The machine base is welded and after with ...

1 foto
Brochure
thumb

RUFF LW30

The LW 30 is designed for all general and high precision linear winding applications. Required speed and torque range can easily be changed by the pre installed transmission gears. The LW 30 is a t...

1 foto
Brochure
thumb

RUFF LW45

The LW45 is designed for all general and high precision linear winding applications. Required speed and torque range can easily be changed by the 2 step switch gear box, moreover the belt ratio can...

1 foto
Brochure
thumb

RUFF LW90

The LW 90 is a sturdy table winder for all high precision linear winding applications, with primary and secondary winding. Required speed and torque range can easily be changed by the 2 step switch...

1 foto
Brochure
thumb

RUFF MINI BASIC

The MINI-BASIC and MINI-Basic-Plus is a very good value machine with an user frendly controller. The machine is designed for mass production of small toroidal cores. It is easy to set up the machin...

1 foto
Brochure
thumb

RUFF MINI BASIC PLUS

The MINI-Basic-Plus brings all the advantages of the Mini-Basic and also has advanced functions in the controller. In addition to programming of the pitch in mm, the machine has a calculation funct...

1 foto
Brochure
thumb

RUFF PULL WINDING MACHINE

The PWM is a toroidal core winding machine based on hook winding technology. Currently only one model is offered. Here, a simple control with a two-line text display is used. The pitch of this mach...

1 foto
Brochure
thumb

RUFF RW55 EVOLUTION

The machine bases are available in two versions: RW 55-Evolution with a fixed winding head and RW 55-Evo-Shuttle with a moveable winding head. The machine base in Shuttle-Version has a slide system...

1 foto
Brochure
thumb

RUFF RW55 EVOLUTION SHUTTLE

The machine bases are available in two versions: RW 55-Evolution with a fixed winding head and RW 55-Evo-Shuttle with a moveable winding head. The machine base in Shuttle-Version has a slide system...

1 foto
Brochure
thumb

RUFF RWE ADVANCE

The RWE-Advance is a sophisiticated machine model with a userfriendly graphical display. By programming of the winding application, the controller calculates the loading turns, pitch and number of ...

1 foto
Brochure
thumb

RUFF RWE BASIC

The RWE-BASIC is a simple machine. It is developed for the mass production of simple winding jobs. This machine is perfect for winding jobs, which allows some tolerances in the pitch. The RWE-BASIC...

1 foto
Brochure
thumb

RUFF RWE EASY

The RWE-Easy is for simple applications and is developed for the mass production. The userfriendly programming of the machine allows a short programming and quick start of the machine. The machine ...

1 foto
Brochure
thumb

RUFF RWE EVOLUTION

The RWE-Evolution is the high end bench top toroidal winding machine base from RUFF. The new controller with innovative programming is user friendly and through the high resolution touch screen dis...

1 foto
Brochure
thumb

RUFF RWE GLOBAL

The RWE-Global is for standard winding applications. The new NC controller with touch screen panel is user friendly and it is very easy to understand. Just a few inputs are needed for create a wind...

1 foto
Brochure
thumb

RUFF WWM EXECUTIVE

Heavy duty spiral winding machine for large wires and big wire spools This automatic high speed spiral winding machine is designed for continuous winding onto endless carrier material with permane...

1 foto
Brochure
thumb

RUFF WWM-16

Heavy duty spiral winding machine for up to 16 winding wires This automatic high speed spiral winding machine is designed for continuous winding of 16 wires onto endless carrier material with perm...

1 foto
Brochure