BALLIU 8 KW HYBRID GMAW/LASER

5-axes Hybrid GMAW/LASER Welding machine Allows welding of wider gaps at higher speeds with a limited head affected zone. High depth-to-width ratio of the weld seam Welding of very large , 3-dimens...

BALLIU BA2000I

The BA2000i is especially designed for cutting wooden sheets of 6 x 3 meter. The cutting zone measures 2 x 3 meter. The wooden sheet is fed into the cutting zone in indexed steps of 2 meter. The ex...

BALLIU CF1250SP

Precise valve disk cutting out of stainless 1250 x 2500 mm sheets Scrap/disk separation system High accuracy due to sheet clamping during the cutting process Smooth cuts because the disk support un...

BALLIU CF1500

FAST 2 high power linear drive motors for speeds up to 150m/min ACCURATE maximum 0.05 mm POWERFULL Lasers van 1.000 tot 5.000 Watt ACCESIBLE Acces doors over thefull length of the cutting area PROD...

BALLIU CO2-LASER WELDING

This laser welding machine is developped for joining flat metal parts. The parts can be of different thickness. Metal sheets are manually (or using robots) put on both sides of the machine. In the ...

BALLIU COMPACT LD FIBER

BALLIU LCW 7000

The LCW 7000 is fully automatic laser machine for constructing the sidewalls of a rail coach. The picture shows a top view of the machine. The automatic loading system can load stainless steel shee...

BALLIU LD 1250PS

BALLIU LD 1500PS

BALLIU LD 2000PS

BALLIU LD 2000PS I

BALLIU LD1250C

BALLIU LM 1500PS

BALLIU LTC 6000

The LTC6000 is developed to cut thin-walled titanium tubes of 6 meter long. The tubes are so light and fragile that they are loaded by hand. For every tube diameter a special insert is installed on...

BALLIU MEGACUT 5A

This MEGACUT is customized for both laser cutting and laser welding of 2D sheets and 3D objects. Both pallets of the pallet changer on the right are mostly used for cutting sheets. The NC-driven T-...

BALLIU MINICUT

BALLIU MINOTAUR 1250

BALLIU MINOTAUR 1500

BALLIU MWS 1000

The MWS 1000 is especially designed for the automated Fiber Laser welding of large turbocharger blades. Filler material can be automatically added while welding. The 12000 Watt Fiber Laser allows d...

BALLIU RP1500N

The RP is a budget friendly Laser cutting machine for companies that switch from time-consuming outsourcing to in-house production of lasered parts. For them, cutting accuracy and flexibility is mo...