HANITA STYLE 12x0/12xB
Multiflute Ball Nose End Mill made from M42 material for very shallow slotting and copying applications, Recommended for light to medium cuts on low to high tensile strength steels, mold steels and...
HANITA STYLE 12x1
2 Flute Ball Nose End Mill made from M42 material for shallow slotting, copying and pocketing, Recommended for light to medium cuts on low to big tensile strength steels, mold steels, tool steels, ...
HANITA STYLE 12x2
2 Flute End Mill made from M42 material for slotting. ramping, pocketing and plunging applications, recommended for light to medium cuts on soft, tough and long chip materials, cast iron and plastics.
HANITA STYLE 12x2K/12x3K
2 & 3 Flute End Mill with a cutting diameter tolerance of - .001 - .003 and made from M42 material for cutting keyways. Recommended for light to medium cuts on low to medium tensile strength steels...
HANITA STYLE 12x4/12x5
4 Flute End Mill made from M42 material for profiling applications, Recommended for light to medium cuts on low to medium tensile strength areas, cast iron, non-ferrous metals and plastics, achievi...
HANITA STYLE 12x6/12x7
6 Flute End Mill made from M42 material for improved productivity and achieving better surface finishes in profiling applications, Recommended for light to medium cuts on low to medium tensile stre...
HANITA STYLE 30x2
2 Flute High Helix End Mill made from M7 material, especially designed for aluminum alloys and long chip materials. Recommended for light to heavy cuts in slotting, ramping, pocketing and plunging ...
HANITA STYLE 34x5/34x7 - Ti35
Javelin Series Multiflute High Helix End Mill made from M42 material, specifically designed for milling titanium alloys. Recommended for medium cuts, in profiling and shallow slotting applications,...
HANITA STYLE 3xx3 SERIES AL-3
Javelin Series 3 Flute High Helix End Mill made from M7 material, specifically designed for high performance milling aluminum alloys and long chip materials, Recommended for light, medium and heavy...
HANITA STYLE 42x0
4 Flute Ball Nose End Mill for very shallow slotting and copying applications. Recommended for low cuts on medium to high tensile strength steel, stainless steels, mold steels, tool steels, titaniu...
HANITA STYLE 42x1
2 Flute Ball Nose End Mill for shallow slotting, copying and pocketing applications. Recommended for light cuts on medium to high tensile strength steel, mold steels, tool steels, titanium and nick...
HANITA STYLE 42x2
Conventional 2 Flute End Mill for shallow slotting, ramping, profiling and pocketing applications. Recommended for light cuts on soft, tough and long chip materials, cast iron. plastics and graphit...
HANITA STYLE 42x3
Conventional 3 Flute End Mill for profiling, shallow slotting and pocketing applications. Recommended for light to medium cuts on high tensile strength steels, stainless steels, cast iron, graphite...
HANITA STYLE 42x5
Conventional 4 Flute End Mill for finishing passes in profiling applications. Recommended for use on low to high tensile strength steels, stainless steels, non ferrous materials, cast iron, graphit...
HANITA STYLE 42x7
Conventional 6 Flute End Mill for finishing passes in profiling applications. Recommended for use on low to high tensile strength steels, stainless steels, non ferrous materials, cast iron, titaniu...
HANITA STYLE 48x3
Conventional 3 Flute 60 degree Helix End Mill especially designed for attaining superior finishes in profiling applications. Recommended for light to medium cuts on high tensile strength steels, st...
HANITA STYLE 4Ax2
Javelin Series 2 FIute High Helix End Mill specifically designed for machining Aluminum at higher speeds, up to 15,000 RPM. Recommended for profiling, shallow slotting, ramping, and pocketing appli...
HANITA STYLE 4Ax3
Javelin Series 3 Flute High Helix End Mill specifically designed for machining Aluminum and Non-Ferrous materials at higher speeds, up to 25,000 RPM. Recommended for medium to heavy cuts in profili...
HANITA STYLE 4AxR
Javelin Series 3 Flute Roughing End Mill specifically designed with optimum chip evacuation for machining Aluminum. Recommended for profiling, deep pocketing, plunging and ramping operations. Excel...
HANITA STYLE 4Bx2
Javelin Series 2 Flute End Mill specifically designed for High Speed Machining in Aluminum at speeds greater than 15,000 RPM, Recommended for light profile cuts with a maximum radial depth of .3D. ...
HANITA STYLE 4Sx7
Javelin Series 6 Flute 45 degree Helix End Mill specifically designed for achieving excellent finishes with light to medium cuts in profiling applications on steels. Highly recommended for high ten...
HANITA STYLE 4SxF
Javelin Series 6, 8 & 10 Flute End Mill specifically designed for achieving superior finishes with light cuts in profiling applications on steels. Highly recommended for maximum performance in high...
HANITA STYLE 4SxR
Javelin Series Roughing End Mill specifically designed for machining medium to high tensle strength steels, and stainless steels. Can also be used on titanium and nickel based alloys, cast iron and...
HANITA STYLE 6246
Stub Roughing End Mill made from M42 material with fine profile, for medium to high tensile strength steels, stainless steels, Titanium and Nickel based alloys. Useful in pocketing, profiling and p...
HANITA STYLE 62x5/62x6
Roughing End Mill made from M42 material with a fine profile for medium to high tensile strength steels, Titanium and Nickel based alloys, recommended for profiling and shallow slotting.The fine pr...
HANITA STYLE 62x7/62x8
Roughing End Mill made from M42 material with a coarse profile. Excellent for deep slotting and heavy side cuts, consuming the least amount of machine power. Recommended for general purpose milling...
HANITA STYLE 62xO - SERIES RF-125
Semi-Roughing End Mill made from M42 material with a flat, truncated profile, specifically designed to achieve a 125 RMS finish in a single pass, recommended for general purpose milling in a large ...
HANITA STYLE 63x6/63x8
Roughing Ball Nose End Mill made from M42 material with chip breaker on ball for roughing operations. Available in both coarse and fine profile designs, For medium to heavy stock removal rates over...
HANITA STYLE 6Kx4
Javelin Series Roughing End Mill made from ASP-60 material with extra-fine profile for medium to high tensile strength steels, stainless steels, Titanium and Nickel based alloys. Recommended for ex...
HANITA STYLE 6lx9/62x9
3 Flute High Helix Roughing End Mill (6lx9 made from M7, 62x9 made from M42 material) with extra-coarse profile, specifically designed with optimum chip evacuation for machining Aluminum . Especial...