LAGUNA 10HP CYCLONE

10HP Cyclone Dust Collector Specs Motor power: 10 Hp 220 volts 3 phase 60 Hz Impeller size: 16" double walled welded steel CFM: 6000 CFM Maximum static pressure: 17" Inlet size: 13" or 5 ports 4" ...

LAGUNA 12" PARALLELOGRAM JOINTER SHEARTEC LL

12" Parallelogram Jointer Sheartec ll Specs Motor: 5HP. 220V. 60HZ. 1PH Cutting Capacity: Width: 12" Depth: 1/2" Rabbetting Capacity: 3/4" Rows of ShearTec II Knives: 6 Number of Knives: 84 Cut...

LAGUNA 14 SUV BANDSAW

LT14 x 14 SUV Bandsaw Specs: Motor: 3HP Leeson Volt: 220 1 phase Recommended Breaker: 30 Amp. Min-Max blade width: 1/8”-1” Resaw Capacity: 14” Throat: 13 ¼” Blade Length: 125” Foot-brake w. Micro S...

LAGUNA 1412 BANDSAW

Two years in the making, Laguna is finally ready to introduce the 14|Twelve. This is Laguna’s first foray into the 110 Volt segment. The result is an uncompromised feat. Features include pyramid ...

LAGUNA 2 HP MOBILE CYCLONE

2 hp Mobile Cyclone Dust Collector - Manual filter cleaning Specs Motor: 2HP TEFC Voltage: 220V 1 Phase Recommended Breaker: 20 Amp. Suction: 1600 CFM-11” Static Pressure Inlet Diameter: 6" with 4...

LAGUNA 3 HP BAG CYCLONE

3 hp Bag Cyclone Dust Collector Specs MDC0690-0145 Motor: 3 HP TEFC - 1ph Suction: 2200 CFM - 16.1" Static pressure Inlet: 8" inlet - 3 x 4" splitter included Footprint: 67"L x 45"W x 91"H Capac...

LAGUNA 3 HP MOBILE CYCLONE

3 hp Mobile Cyclone Dust Collector Specs MDC0680-0145 Motor: 3 HP TEFC - 1ph Filter: Spun-bond polyester - Filters 99.9% of particles to 1 micron Suction: 2200 CFM - 16.2" Static pressure Inlet: ...

LAGUNA 4.5 HP CYCLONE

4.5 hp Cyclone Dust Collector Specs MDC1200-0145 2 stage dust collector with auto cleaning cycle 4.5 HP - 1 Phase 220 Volts BALDOR MOTOR CFM: 3350 Maximum static pressure: 16" Inlet diameter:...

LAGUNA 6" WEDGEBED JOINTER SHEARTEC II

6" Wedgebed Jointer ShearTec II Specs German Carbide Inserts Number of Knives: 42 Cutterhead RPM: 5500 Fence Dimension: 29" X 4" Fence Tilt: + - 45 degrees Built-in Casters Motor: 1.5 HP 110 volts

LAGUNA 6" WEDGEBED JOINTER STANDARD KNIVES

6" Wedgebed Jointer Standard Knives Specs MJO2000-0120 Motor: 1.5 HP motor 110 volts Table Length: 55.7" Cutterhead: Straight knives. Cutterhead Speed: 5,200 rpm Fence Dimension: 29" x 4" Fe...

LAGUNA 8" PARALLELOGRAM JOINTER SHEARTEC II

8" Parallelogram Jointer ShearTec II Specs Motor: 3hp / 3,450rpm Cutting Capacity: Width: 8" Depth: 1/2" Rabbetting Capacity: 1/2" Cutterhead: Speed: 5200 rpm Spiral Cutter Head: Yes Diameter: ...

LAGUNA 8" WEDGEBED JOINTER SHEARTEC II

8" Wedgebed Jointer ShearTec II Specs MJO2100-0120 Motor: 2 HP TFEC Table: 71" x 9" Cut Capacity: 1/8" Rabbeting: 1/2" Fence: 39-3/4" x 4-3/4" Fence Tilt: 90 - 45 degrees Cutterhead: Shear-T...

LAGUNA BANDIT 2/3

Bandit 2/3 Edgebander Specs • Motor: 220 Volt, 1 phase, 60 Hz. • Total HP Installed: 9 • Min. Tape Thickness: 0.4mm • Max. Tape Thickness: 3mm • Feed Speed: 26 Ft/Min. • Feed System: Track Feed • ...

LAGUNA BANDIT 3/2

Bandit 3/2 Edgebander Specs ●Power: 220 Volt, 1 phase 40 Amp ●Compressed Air Required: 87 PSI Clean dry air ●Tape Thickness (min-max): 0.4 mm - 2 mm ●In-feed Fence: Heated ●Glue Tank Capacity: 30 o...

LAGUNA BANDIT 4/3

Bandit 4/3 Edgebander Specifications Motor: 220 Volt, 3 phase, 60 Hz. Total HP Installed: 9 Min. Tape Thickness: 0.4mm Max. Tape Thickness: 3mm Feed Speed: 26 Ft/Min. Feed System: Track Feed Max. P...

LAGUNA BANDIT 4/8

Bandit 4/8 Edgebander Specifications Minimum Panel Width: 2.36" Minimum Panel Length: 4.7" Panel Thickness: 10mm to 60mm Feed Speed: 36 to 48 ft/min Size (L x W x H): 149" x 39" x 71" Weight: 3,6...

LAGUNA CIRCULATOR" SHOP AIR FILTER

"Circulator" Shop Air Filter - 1400CFM 110V 1PH Specs Motor: 1/3 HP 110 Volt CFM: 1400 Timer: 2, 4, 6, 8H + Infinite Outer Filter: 5 Micron Inner Filter: 1 Micron Noise Rating (L-M-H): 61.1, 62.3, ...

LAGUNA CL1200 LATHE

CL1200 Lathe Specs Max Distance Between Centers: 46" Max Copying Length: 40" Max Depth of Copying: 2.5" Max Diameter: 8.5" Morse Taper Centers: MK2 Thread Size: 33mm x 3.5 Speeds: 500 / 1,000 ...

LAGUNA CNC TURNER

Our CNC 3 Axis Turner is able to make incredibly detailed spindles. The resolution is 0.0003. The machine is powered by a Liquid-Cooled 3HP spindle capable of running very long run times without ov...

LAGUNA COMPACT 25" 1K WIDEBELT SANDER

Compact 25" 1K Widebelt Sander Specs ● 25” Compact Widebelt ● Volt: 220, 1 phase, 60 Hz. ● HP: 7.5 Main Motor ● Bed Adjustment: Electric, 0.33 HP Motor ● Micro Adjust: Manual Handle ● Conveyor: 22 ...

LAGUNA DELUXE

LAGUNA DS|16 DUST SEPARATOR

DS|16 Dust Separator Specifications -Huge 16 Gallon Capacity -99% Separation -Less than 1% Into Your Existing Vacuum -Filter stays cleaner, lasts longer, performs better -360 Swiveling casters make...

LAGUNA FS41N JOINTER / PLANER

FS41N Jointer / Planer Specifications MJP-0200-0020 Jointer Table Width: 16" Table Length: 70" Cutter Head Diameter: 4" Number of Knives: 4 Fence Size: 43" x 6" Max. Depth of Cut: 3/16" Planer ...

LAGUNA INDUSTRIAL SERIES 16" JOINTER

Industrial Series 16" Jointer 5HP 1phase Specs MJO6405-0800 Table length: 98" Jointer Width: 16" Table Height: 31-1/2" Parallelogram Adjustments Jointer Fence Tilt: 90 - 45 degrees Motor: 5 HP ...

LAGUNA ITALIAN LT16 HD BANDSAW

Italian LT16 HD Bandsaw Specs: Motor: 4.5 hp Baldor Resaw: 16-3/8" Volts: 220 Amp Breaker: 40 Min. Blade: 1/16" Max. Blade: 1-3/8" Throat: 15 1/2" Table Size: 16-1/2" x 22-3/4" Blade Length: 150" T...

LAGUNA ITALIAN LT18 BANDSAW

Italian LT18 Bandsaw Specs: Motor: 4.5 hp Baldor Resaw: 18-3/8" Volts: 220 Amp Breaker: 40 Min. Blade: 1/16" Max. Blade: 1-3/8" Throat: 16-1/2" Table Size: 19" x 25 " Blade Length: 158" Tab...

LAGUNA ITALIAN LT20 BANDSAW

Italian LT20 Bandsaw Specs Motor: 6 hp Baldor Resaw: 20-3/8" Volts: 220 Amp Breaker: 40 Min. Blade: 1/8" Max. Blade: 1-3/8" Throat: 19" Table Size: 19" x 25" Blade Length: 176" Table Height: 35" Ra...

LAGUNA ITALIAN LT24 X 17 BANDSAW

Italian LT24 x 17 Bandsaw Specs Motor: 6 hp Baldor Resaw: 17-5/8" Volts: 220 Amp Breaker: 40 / 1 - 40 / 3 Min. Blade: 1/8" Max. Blade: 1-1/2" Throat: 23 1/4" Table Size: 24" x 34-1/2" Blade...

LAGUNA ITALIAN LT24 X 24 BANDSAW

Italian LT24 x 24 Bandsaw Specs Motor: 6 hp Baldor Resaw: 24 " Volts: 220 Amp Breaker: 40 / 1 - 40 / 3 Min. Blade: 1/8" Max. Blade: 1-1/2" Throat: 23-1/4 " Table Size: 24 " x 34-1/2" Blade ...

LAGUNA ITALIAN LT37 BANDSAW

Italian LT37 Bandsaw Specs Motor: 15 hp Baldor Resaw: 24 " Volts: 220 3ph Amp Breaker: 50 / 3 Min. Blade: 1/4" Max. Blade: 2 " Throat: 36" Table Size: 31" x 50 " Blade Length: 261 " Table...

LAGUNA ITALIAN RESAW MASTER BANDSAW

Italian Resaw Master Bandsaw Specifications NOW with 18" Resaw Capacity! Motor: 6 hp Baldor Resaw: 18" Volts: 220 Amp Breaker: 35 Min. Blade: 3/4" Max. Blade: 2 " Throat: 17" Table Size: 19" x 2...

LAGUNA J16 JOINTER

J16 Jointer Specifications MG00003 Table Width 16" Table Length 102" Infeed Table Length 53" Outfeed Table Length 43" Fence Size 53" x 6 1/2" Table Height 35" Max. Depth of Cut 5/16" Cutte...

LAGUNA LAGUNA 46 BORING MACHINE

Laguna 46 Boring Machine Specifications Min distance between heads: 7.25" Max distance between heads: 24" Motors: 2 US made Baldor 3hp 60Hz Number of spindles: 46 Distance between bits: 32mm Tota...

LAGUNA LBM 200 MORTISER

LBM 200 Mortiser Specs MT0LBM200 Motor: 2 hp 1-phase Baldor Work Table: 23.5" x 12.5" Max. Side to Side Travel: 9.6" Max. Plunge Travel: 8" Max. Vertical Movement: 6" Dowel Index Center: 16mm...

LAGUNA LBM 23 E BORING MACHINE

LBM 23 E Boring Machine Specifications A021000 23 spindle line & construction boring Quick change chucks Dual telescoping fence Drills 8’ panels Single phase Baldor motor Helical steel gears Indu...

LAGUNA LBM200

LAGUNA M15 V BORING MACHINE

M15 V Boring Machine Specifications MLB0200-0400 Spindel N: 15 Distance Between Spindle: 1 1/4" Distance Between 1st & Last: 17 5/8" Suited Drill Length: 2-1/4" , 3-5/16" Maximum Boring Depth: 2 ...

LAGUNA MDP1750002

• RPM: Variable from 200-2600 RPM • Table: 13.5" x 13.5" Pivoting • Chucks: 1/2" Keyed Chuck • Travel: 3"

LAGUNA MOBILE CYCLONE

Mobile Cyclone Dust Collector 1.5HP 110V Man. Clean Canister Specs Motor: 1.5 HP TEFC 110V 60Hz 1 Phase 20 Amp breaker Filter: Spun-bond polyester - Filters 99.9% of particles to 1 micron Cleaning...

LAGUNA P12|10

P12|10 Specs ● Motor: 5HP Main ● Motor: 3/4 HP Scoring ● Volt: 220, 1 phase, 60 Hz ● Blade Capacity: 12", 14"/300mm, 350mm ● Max. Blade: 16"/400mm (minimum height when lowered: 1"/25mm) ● Max Scori...

LAGUNA P12|4

P12|4 Specs ● Motor: 3HP Main ● Motor: 3/4 HP Scoring ● Volt: 220, 1 phase, 60 Hz. ● Blade Capacity: 12", 14"/300mm, 355mm ● Max. Blade: 14"/355mm (minimum height when lowered: 1"/25mm) ● Max Scori...

LAGUNA P12|5

P12|5 Specs ● Motor: 5HP Main ● Motor: 3/4 HP Scoring ● Volt: 220, 1 phase, 60 Hz ● Blade Capacity: 12", 14"/300mm, 355mm ● Max. Blade: 14"/355mm (minimum height when lowered:1"/25mm) ● Max Scoring...

LAGUNA P12|8

P12|8 Specs ● Motor: 5HP Main ● Motor: 3/4 HP Scoring ● Volt: 220, 1 phase, 60 Hz ● Blade Capacity: 12", 14"/300mm, 350mm ● Max. Blade: 16"/400mm (minimum height when lowered:1"/25mm) ● Max Scoring...

LAGUNA PINNACLE LATHE

Pinnacle Lathe Specs MTP105 Turning capacity: 24 Turning capacity/bridge removed: 48 Distance between centers: 52 3 HP Motor 220-volt single or 3-phase Weight: 1500 lbs Head stock thread (ada...

LAGUNA PLATINUM HOLLOW

LAGUNA PLATINUM SERIES 10" 5 FUNCTION COMBINATION MACHINE W/ SPIRAL CUTTERS

Platinum Series 10" 5 Function Combination Machine w/ Spiral Cutters Specs MCO05000 Jointer/Planer Maximum Planer: 10" Motor: 2 hp Cutting knife: Spiral (Shear-Tec) Maximum Thickness: 7" Tablesaw M...

LAGUNA PLATINUM SERIES 12" JOINTER/PLANER W/ SCH

Platinum Series 12" Jointer/Planer w/ SCH Specs MJOPL124400 Motor: 3 hp Jointer Table Size: 12" x 63 Planer Table Size: 12" x 30 " Cutterhead Diameter: 3 3/4" Feed Roller Diameter: 1 1/2" She...

LAGUNA PLATINUM SERIES 16-43 LATHE

Platinum Series 16-43 Lathe Specs Motor: 1.5 HP TFEC Voltage: 110 Volt Swing Over Bed: 16" Distance Between Center: 43" RPM Range: 600 - 2400 RPM Spindle: 1-1/4" x 8 TPI Head and Tailstock Ta...

LAGUNA PLATINUM SERIES 16" JOINTER / PLANER COMBINATION W/ SPIRAL CUTTERS

Platinum Series 16" Jointer / Planer Combination w/ Spiral Cutters Specs Motor: 4 HP Jointer Table Size: 16" x 63" Planer Table Size: 16" x 30" Feed Roller Diameter: 1 1/2" Cutterhead: Shear-Te...

LAGUNA PLATINUM SERIES 18-47 LATHE

Platinum Series 18-47 Lathe Specs Motor: 2.0 hp Variable Speed: yes Spindle Speed Range - Low: 100 - 1200 rpm High: 200- 3200 rpm Swing Over Bed: 18" Distance Between Centers: 47" Headstock ...