The Winton Model 2 Rotary-Draw Tube Bender is a single axis PLC control with keypad & display for quick and easy data entry that can store up to 250 parts. This 250 Part Program Storage Capability ...
ベンダー、パイプ、チューブ&バー
1 フォト
WINTON 200A
The Little Bob bender is used to bend a single bend angle in a work piece. A tool bar can be added to the machine that will allow multiple bends to be placed in a single work piece. Little Bob is...
ベンダー、パイプ、チューブ&バー
1 フォト
WINTON 200H
Winton Machine offers a production ready tube bender for small diameter tubing. The 200H is a vertical compression tube bender that operates on a 1.7 second cycle time for a 90° bend. Precision mul...
ベンダー、パイプ、チューブ&バー
1 フォト
WINTON 21161-605
Each semi-rigid cable bender, dedicated or standard, is able to bend a maximum angle of 185 degrees. If you don't see what you need below, please ask! We want to help you bend semi rigid cable.
ベンダー、ハンド
1 フォト
WINTON 21161-610
Each semi-rigid cable bender, dedicated or standard, is able to bend a maximum angle of 185 degrees. If you don't see what you need below, please ask! We want to help you bend semi rigid cable.
ベンダー、ハンド
1 フォト
WINTON 21161-620
Each semi-rigid cable bender, dedicated or standard, is able to bend a maximum angle of 185 degrees. If you don't see what you need below, please ask! We want to help you bend semi rigid cable.
ベンダー、ハンド
1 フォト
WINTON 21161-630
Each semi-rigid cable bender, dedicated or standard, is able to bend a maximum angle of 185 degrees. If you don't see what you need below, please ask! We want to help you bend semi rigid cable.
ベンダー、ハンド
1 フォト
WINTON 21161-640
Each semi-rigid cable bender, dedicated or standard, is able to bend a maximum angle of 185 degrees. If you don't see what you need below, please ask! We want to help you bend semi rigid cable.
ベンダー、ハンド
1 フォト
WINTON 21161-642
Each semi-rigid cable bender, dedicated or standard, is able to bend a maximum angle of 185 degrees. If you don't see what you need below, please ask! We want to help you bend semi rigid cable.
ベンダー、ハンド
1 フォト
WINTON 21161-650
Each semi-rigid cable bender, dedicated or standard, is able to bend a maximum angle of 185 degrees. If you don't see what you need below, please ask! We want to help you bend semi rigid cable.
ベンダー、ハンド
1 フォト
WINTON 21161-660
Each semi-rigid cable bender, dedicated or standard, is able to bend a maximum angle of 185 degrees. If you don't see what you need below, please ask! We want to help you bend semi rigid cable.
ベンダー、ハンド
1 フォト
WINTON 21161-670
Each semi-rigid cable bender, dedicated or standard, is able to bend a maximum angle of 185 degrees. If you don't see what you need below, please ask! We want to help you bend semi rigid cable.
ベンダー、ハンド
1 フォト
WINTON 21161-673
Each semi-rigid cable bender, dedicated or standard, is able to bend a maximum angle of 185 degrees. If you don't see what you need below, please ask! We want to help you bend semi rigid cable.
ベンダー、ハンド
1 フォト
WINTON 21161-680
Each semi-rigid cable bender, dedicated or standard, is able to bend a maximum angle of 185 degrees. If you don't see what you need below, please ask! We want to help you bend semi rigid cable.
ベンダー、ハンド
1 フォト
WINTON 21161-683
Each semi-rigid cable bender, dedicated or standard, is able to bend a maximum angle of 185 degrees. If you don't see what you need below, please ask! We want to help you bend semi rigid cable.
ベンダー、ハンド
1 フォト
WINTON 2500
ベンダー、パイプ、チューブ&バー
1 フォト
WINTON 300
The model 300 tube bender offers programmable bend control, 1.7 second cycle time (90° bend). To ensure the performance of the 300, heavy duty roller bearings are used to guide the bend die and cus...
ベンダー、パイプ、チューブ&バー
1 フォト
WINTON 300B
The model 300 tube bender offers programmable bend control, 1.7 second cycle time (90° bend). To ensure the performance of the 300, heavy duty roller bearings are used to guide the bend die and cus...
ベンダー、パイプ、チューブ&バー
1 フォト
WINTON 500
Winton Machine has built in a fan cooled heat exchanger because we understand the importance of keeping the temperature of the hydraulic fluid below a certain level. We also offer an optional 95 ga...
ベンダー、パイプ、チューブ&バー
1 フォト
WINTON AB10
Winton Machine has been building tube benders for over a decade. From its stout structural frame to its modular configuration, the AB10 tube bending machine continues to bend quality parts for indu...
ベンダー、パイプ、チューブ&バー
1 フォト
WINTON AB6
All tube benders are designed and tested in house. We use standard purchased components to build every tube bender. We at Winton are proud of the quality of every tube bender sold. Please, call ...
ベンダー、パイプ、チューブ&バー
1 フォト
WINTON ADAPTOR SERIES
This high speed tube fabrication system automatically loads the tubes and bends the tubing. After the tubes are bent they complete a secondary operation per the customer's production requirements.
チューブ 機械 (成型)
1 フォト
WINTON AM150
The AM150 digital protractor uses two arms to measure a bend angle. One arm is fixed and the other arm (dynamic) has two axis of motion. The dynamic arm has both rotational and linear motion. The r...
測定機
1 フォト
WINTON AM40
The AM40 digital protractor uses two arms to measure a bend angle. One arm is fixed and the other arm (dynamic) has two axis of motion. The dynamic arm has both rotational and linear motion. The ro...
測定機
1 フォト
WINTON AM75
The AM75 digital protractor uses two arms to measure a bend angle. One arm is fixed and the other arm (dynamic) has two axis of motion. The dynamic arm has both rotational and linear motion. The ro...
測定機
1 フォト
WINTON BELLOW CUT-OFF
This Bellow Cut-off machine makes one cut close to the head stock. The position of the cut will be controlled by the spinning internal arbor and the details located on the external cross slide. O...
カットオフ、チューブ、パイプ&バー
1 フォト
WINTON CB50
Winton's CB50 CNC tube bender is designed to make consecutive CW and/or CCW bends in a single work piece. An XY servo controlled head shifter positions the bend head in the correct orientation with...
ベンダー、パイプ、チューブ&バー
1 フォト
WINTON CM12
All tube benders are designed and tested in house. We use standard purchased components to build every tube bending machine. We at Winton are proud of the quality of every tube bender sold. Plea...
ベンダー、パイプ、チューブ&バー
1 フォト
WINTON CNC CUTOFF + BENDER
Winton Machine produces CNC tube & pipe benders with loaders as well. Give us a call. We would like to help you reduce your cost of goods sold.
The Winton CTL-23PA can be coupled with a RD25 NC d...
ベンダー、パイプ、チューブ&バー
1 フォト
WINTON CRIMPING MACHINE
The Crimp Meister is a tool that pre-swages ferrules onto small tubular lines, thus reducing overall build time. The pneumatic device quickly locates and crimps a sleeve into position on the end o...
クリンパー
1 フォト
WINTON CTL-12L
Model CTL-12L Automatic Feed & Lathe Type Cut - Standard Equipment, Including:
• Microprocessor controlled
• Closed loop feedback system used to feed material forward
• Chip type cut, cut head rot...
カットオフ、チューブ、パイプ&バー
1 フォト
WINTON CTL-23PA
カットオフ、チューブ、パイプ&バー
1 フォト
WINTON CTL-30PA
The CTL-30PA automatic tube cutter comes standard with programmable part quantity and programmable cut length. A material low indicator is used to sense the end of a straight length and alerts the...
カットオフ、チューブ、パイプ&バー
1 フォト
WINTON CTL-6S
The CTL-6S is an automatic saw that comes standard with programmable part quantity and programmable cut length (in/mm). 80 psi shop air ensures that the tube is clamped during the cutting process. ...
カットオフ、チューブ、パイプ&バー
1 フォト
WINTON DH25
チューブ端末 成型機
1 フォト
WINTON DH25H
The DH25H is a Double Hit ram type end former with a top load and a side load for accessibility. This machine is a high speed end forming machine designed for increased production time. The DH25H w...
チューブ端末 成型機
1 フォト
WINTON DH50
Quick change tooling is used to keep change over times to a minimum. For example, our 37 degree flaring tool set takes 3 minutes to change out. Other similar tools would be for brake line flaring...
チューブ端末 成型機
1 フォト
WINTON DRB25 CNC
The model DRB25 is a unique CNC Coil Bender designed to roll multiple layer coils and or coils with one (1) leg in. Roll benders built by Winton have been designed for production tube bending. Whe...
ベンダー、パイプ、チューブ&バー
1 フォト
WINTON E100
All end formers are designed and tested in house. We use standard purchased components to build every end forming machine. We at Winton are proud of the quality of every end forming sold. Please...
チューブ端末 成型機
1 フォト
WINTON E50
The model E50 tube end former is a production machine used to expand the end of a tube. The end former uses 8 segmented fingers to minimize the tooling marks on the tube as the tube expands.
チューブ端末 成型機
1 フォト
WINTON HB12
Winton Machine offers a standard rotary draw hand bender that makes use of interchangeable tooling. The base unit is crafted from quality steel. The HB12 hand bender comes standard with an adjust...
ベンダー、ハンド
1 フォト
Brochure
WINTON HOPPER LOADER
Supports user adjustable tube lengths
Standard units is PLC controlled
Electrical interlock provides for safe machine operation
Interchangeable tooling supports a wide range of tube diameters
Hoppe...
システムをロード/アンロード
1 フォト
WINTON M23
ストレート、チューブ&バー
1 フォト
WINTON M35
The M Series is a free standing machine with a variable speed control, a forward and reverse switch, and an E stop switch for safe operation.
All tube straighteners are designed and tested in ho...
ストレート、チューブ&バー
1 フォト
WINTON NB1
The bench top needle bender is programmable to bend small diameter probes/needles to high precision tolerances. Repeatable to within .0002", a user can bend multiple needles at a time. The all elec...
ベンダー、パイプ、チューブ&バー
1 フォト
WINTON OB23
The OB23 Orbital tube bender pulls the copper from a bulk spool, straightens it, bends it, and drops off a completely severed part. This machine allows you to increase your profitability through re...
ベンダー、パイプ、チューブ&バー
1 フォト
WINTON RD10
The RD10 CNC tube bender is built to bend small diameter tubing including brake lines, refrigeration components, and fuel lines. Production ready, this three-axis all-electric tube bender uses a Wi...
ベンダー、パイプ、チューブ&バー
1 フォト
WINTON RD20
To keep programming of new parts down to a minimum, the tube bender can be linked directly to engineering. Engineering can download a CAD generated STEP file of the bent tube right into the cell’s...
ベンダー、パイプ、チューブ&バー
1 フォト
WINTON RD20 ECNC
Winton’s line of eCNC mandrel tube benders are now available with an optional serpentine bend head. The low profile bend head provides the necessary clearance required for bending a serpentine prof...
ベンダー、パイプ、チューブ&バー
1 フォト
WINTON RD20 NC
Winton Machine has been building tube benders for over a decade. From its stout structural frame to its efficient mandrel bending cycle, the RD20 continues to bend quality parts for industries such...