MITSUBISHI LT-350

High-performance LT Series CNC lathes deliver the ultimate in rigidity—with 6-inch, 8-inch and 10-inch chuck sizes. The full-enclosure, FC30 Meehanite cast-iron design features a 30-degree slant be...

MURATEC MD100

The MD100 is a single spindle CNC turning center with integrated live-tooling capabilities combining multiple operations into one, highly accurate machine. A next-generation solution for lean manu...

MURATEC MD120

Suitable for various types and patterns of production, the MD120 is a versatile solution for a unique requirements and configurations. With two spindles and the automatic part turnaround device, t...

MURATEC MD120G

Twin Spindle CNC Turning Center A new compact production line with minimum production time capability.

MURATEC MD200

This 10-inch twin spindle automated turning center features live tooling capabilities, including milling and drilling, and can satisfy both low- and high-volume production requirements.

MURATEC MD200G

Twin Spindle CNC Turning Center Turning, drilling and milling in one setup provides next-generation solutions to lean manufacturing systems with flexible line planning.

MURATEC MD60

This 8-inch single spindle automatic turning center features live-tooling capabilities, including milling and drilling, and can satisfy both low- and high-volume production requirements.

MURATEC MD60G

CNC Turning Center A new compact production line with minimum production time capability.

MURATEC MJ100

The MJ100 is a specialty machine that was purposefully developed for the automated turning of shaft type production parts that require tight machines tolerances. A single spindle CNC turning machin...

MURATEC MJ200

The MJ200 is a single spindle CNC turning center that was specifically designed for the simultaneous turning of longer parts. A high-speed machine, the MJ200 offers flexible operation and can perf...

MURATEC MJ200G

Single Spindle CNC Turning Center MJ200G Twin Turret Single Spindle CNC turning machine for simultaneous operations.

MURATEC MJ60

A single spindle CNC turning machine, the MJ60 comes equipped with a single 8 station tool turret and hydraulic actuated tailstock. From shafts, to end pieces and everything in between, the MJ60 o...

MURATEC ML400

Shaft Turning Machine The ML400 super compact shaft turning machine allows for the automated turning of shaft parts up to 400 mm (15.7") in length and up to 200 mm (7.9") in diameter. With twin tu...

MURATEC MS100

The MS100 is a single spindle CNC turning center, delivering revolutionary results to automated line systems. Though this machine can accommodate the largest parts within our MS Series, its compact...

MURATEC MS20

The MS20 is designed for small, precise parts. This machine can be combined with the twin spindle turning centers within the MW Series for increased productivity and a better working environment. ...

MURATEC MS50

The MS50 delivers exceptional rigidity, high precision processing, and greater productivity. With a super high-speed loader and versatile automation, this machine features quick load/unload times ...

MURATEC MS60

The MS60 is a single spindle CNC turning center that is revolutionizing automated turning with its compact size. Its small footprint paired with its high-speed capabilities make this an incredibly ...

MURATEC MS90

The MS90 is a single spindle CNC turning center that can perform third operations at incredibly high speeds. Like all the machines in our MS Series, the MS90 is frequently used for line planning al...

MURATEC MT100

With a built-in Y axis, the MT100 allows for greater precision on complex parts. The MT100 is designed such that each turret can serve either spindle at any time, a feature that makes it highly pro...

MURATEC MT12

In-line Opposed Twin Spindle CNC Turning Machine MT12 combines the power of two machines in one to achieve low cost manufacturing. MT12 has flexibility of both bar-work and chuck-work with complet...

MURATEC MT20

In-line Opposed Twin Spindle CNC Turning Machine MT20 combines the power of two machines in one to achieve low cost manufacturing flexibility on both bar work and chuck work with complete automatio...

MURATEC MT200

Multi-Tasking, Twin Spindle Turning Machine MT200, a new multi-tasking, twin spindle turning machine with three turrets and gantry loader, is an excellent choice for facilities running complex par...

MURATEC MT25

In-line Opposed Twin Spindle CNC Turning Machine MT25 combines the power of two machines in one to achieve low cost manufacturing flexibility of both bar work and chuck work with complete automati...

MURATEC MW100

The MW100 is a twin-spindle turning center that provides exceptional rigidity for high-precision processing and improved productivity. Equipped with column and turret bar construction and a high-sp...

MURATEC MW100GT

Twin Spindle / Twin Gantry Turning Center with Column/ Turret Bar Construction Provides exceptional rigidity and high precision processing for higher productivity.

MURATEC MW120

The MW120 machine is designed for low to high volume production of various part types. With a twin spindle design, this machine offers unmatched part production efficiency. Unlike similar models on...

MURATEC MW120EX

The MW120EX machine goes a step beyond the standard MW120, by delivering part turning capability with super-high precision. Designed specifically to turn ultra-accurate parts, this machine offers t...

MURATEC MW120G

Twin Spindle CNC Turning Center Great Performance in Compact Space -- Compact cell system with floor size 2850 mm x 1865 mm.

MURATEC MW120GII

The MW120GII features a high-speed, lightweight gantry loader that offers significantly increased rapid traverse speeds in the X, Y, and Z axes. With this newly designed high-speed gantry loader, t...

MURATEC MW120GT

Twin Spindle CNC Turning Center Minimum Production Time - 16 Seconds. Twin Gantry loader construction for high productivity.

MURATEC MW120HG

Twin Spindle CNC Turning Center For Hard Turning Applications. Can cut materials having hardness more than HRC 45.

MURATEC MW180

The MW180 is a medium-sized, CNC turning center with twin spindles. It’s equipped with a gantry that has the ability to pick up parts of varying sizes and weights, making it a versatile solution fo...

MURATEC MW200

MURATEC MW200G

Twin Spindle CNC Turning Center High speed three-axis CNC gantry loader offers versatile automation solutions with rapid load/unload times.

MURATEC MW200GT

MW200GT Twin spindle/Twin gantry turning center with column/turret bar construction provides exceptional rigidity and high precision processing to achieve rationalization of productivity.

MURATEC MW35

Our newest and most eco-friendly machine, the MW35 is an all-electric turning center that can create fasteners and other small parts in as little as three seconds! Additionally, MW35’s compact foot...

MURATEC MW40

The Muratec MW40 is an extreme-precision compact turning center capable of repeatability in the single digit micron level. For small, high precision components in medium to large lot sizes, you ca...

MURATEC MW400

If large parts are what you turn, the MW400 is the machine for you. Featuring a single piece cast bed, the MW400 is a heavy-duty machine that will handle parts up to 16” diameter. The machine’s 40H...

MURATEC MW400G

Twin spindle turning center with column/turret bar construction. Provides exceptional rigidity and high precision processing to achieve higher productivity.

MURATEC MW50

The compact, energy saving MW50 is designed for compact line operation, flexibility in manufacturing, versatility and easy setup change. This automated CNC turning center targets parts that are 50 ...

MURATEC MW80

As a super-compact twin spindle turning center, the MW80 reduces cycle times with its high-speed gantry and lightning-fast load/unload times. Designed for increased productivity, this machine is eq...

MURATEC MWR120G

With a design based on automation at its core, Muratec’s MWR120 series is a first-of-its-kind, front-facing, horizontal twin spindle CNC live tool chucker lathe equipped with Y-axis function. Key f...