展示32 モデル
thumb

CAMPRO PV-2216

High Accuracy and High Rigidity 25 hp, 6,000 rpm Japanese made Gear-head Spindle 34 hp, 10,000 rpm Built-in Motor Spindle (Optional) Single unit (monobloc) bridge Largest 32-tools ATC system as sta...

X:86.61 in
Y:62.98 in
Z:29.52 in
1 フォト
Brochure
thumb

CAMPRO PV-3216

Extra heavy load recirculating roller linear guideway on X-axis and Y-axis Fast rapid feedrate on X-axis and Y-axis are 20 m/min, and Z-axis is 16 m/min Automatic lubrication to the sliding point...

X:126.0 in
Y:63.0 in
Z:30.0 in
1 フォト
Brochure
thumb

CAMPRO PV-3221

High Accuracy and High Rigidity 25 hp, 6,000 rpm Japanese made Gear-head Spindle 34 hp, 10,000 rpm Built-in Motor Spindle (Optional) Single unit (monobloc) bridge Largest 32-tools ATC system as sta...

X:126.0 in
Y:82.68 in
Z:31.49 in
1 フォト
Brochure
thumb

CAMPRO PV-4216

High Accuracy and High Rigidity 25 hp, 6,000 rpm Japanese made Gear-head Spindle 34 hp, 10,000 rpm Built-in Motor Spindle (Optional) Single unit (monobloc) bridge Largest 32-tools ATC system as sta...

X:165.0 in
Y:62.9 in
Z:29.5 in
1 フォト
Brochure
thumb

CAMPRO PV-4221

High Accuracy and High Rigidity 25 hp, 6,000 rpm Japanese made Gear-head Spindle 34 hp, 10,000 rpm Built-in Motor Spindle (Optional) Single unit (monobloc) bridge Largest 32-tools ATC system as sta...

X:165.4 in
Y:82.68 in
Z:29.52 in
1 フォト
Brochure
thumb

CAMPRO PV-5221

High Accuracy and High Rigidity 25 hp, 6,000 rpm Japanese made Gear-head Spindle 34 hp, 10,000 rpm Built-in Motor Spindle (Optional) Single unit (monobloc) bridge Largest 32-tools ATC system as sta...

X:204.7 in
Y:82.68 in
Z:31.49 in
1 フォト
Brochure
thumb

CAMPRO PV-5226

X:204.0 in
Y:102.0 in
Z:31.0 in
1 フォト
Brochure
thumb

CAMPRO PV-5231

High Accuracy and High Rigidity 25 hp, 6,000 rpm Japanese made Gear-head Spindle 34 hp, 10,000 rpm Built-in Motor Spindle (Optional) Single unit (monobloc) bridge Largest 32-tools ATC system as sta...

X:204.0 in
Y:122.0 in
Z:31.0 in
1 フォト
Brochure
thumb

CMS ANTARES

The Antares 5 axis CNC machining center is CMS' smaller, compact yet very fast version of Ares, with enhanced speed and flexibility. Antares' standard rapid speed of 80 meters/minute and accelerati...

X:102.0 in
Y:59.0 in
Z:47.0 in
1 フォト
Brochure
thumb

CMS ANTARES TR

The Antares 5 axis CNC machining center is shown here in its optional Rotating Table version, TR, which makes possible Antares' nonstop (pendular) work cycle in an extremely compact footprint and w...

1 フォト
Brochure
thumb

CMS ARES 3618

Ares model 3618, CMS' compact, accurate and versatile machining center for advanced materials applications. In this photo can be seen Ares' robust enclosed structure and frontal doors which are aut...

X:141.7 in
Y:70.87 in
Z:47.24 in
1 フォト
ビデオ
Brochure
thumb

CMS ARES 4818

Ares model 4818, CMS' midsized, multipurpose, 5-axis CNC machining center. The midsized Ares model is the most often requested since its dimensions are perfect for many businesses, making it possib...

X:188.0 in
Y:70.0 in
Z:47.0 in
1 フォト
ビデオ
Brochure
thumb

CMS ARES 6018

Ares model 6018, CMS' large 3D format, 5 axis CNC machining center. The Ares 6018 makes it possible to work throughout truly long spans for parts with lengths up to 6 meters (just short of 20'), wh...

X:236.0 in
Y:70.0 in
Z:47.0 in
1 フォト
ビデオ
Brochure
thumb

CMS CRONUS

Here, the CMS Cronus CNC mill shows it robust, heavy-duty structure, designed and created through FEM (Finite Element Method) technology. The protective walls placed between Cronus’ solid support s...

1 フォト
Brochure
thumb

CMS CRONUS-K

The CMS Cronus K is a compact, yet highly powerful 5-axis CNC milling and machining center. This precise, versatile machine provides all the features of the Cronus range on a monobloc basement with...

X:157.0 in
Y:59.05 in
Z:51.18 in
1 フォト
Brochure
thumb

CMS FXB-DOUBLE

The FXB vertical machining center's double table version is shown equipped with CMS' patented "ring pressing device" for routing parts from stacked aluminum sheets. This eliminates the need for hun...

1 フォト
Brochure
thumb

CMS FXB-SINGLE

The FXB 5 axis CNC machining center's single table version, with table in solid aluminum plate, 8' x 5', with T-slots parallel to both X and Y axes for the rigid anchoring of fixtures and templates...

1 フォト
Brochure
thumb

CMS MBB-1B

This photo shows a picture of an MBB 1B-Special, the narrowest version of the MBB CNC machining center, but, in this case, with a longer length. Its rail and clamping system have been adapted for m...

1 フォト
ビデオ
Brochure
thumb

CMS MBB-1T

MBB's 1T version for processing heavy component, mid-range electrical tension, copper busbars. This MBB 1T version CNC machining center is narrow and with a length such that it's capable of nonstop...

1 フォト
ビデオ
Brochure
thumb

CMS MBB-2B

Building upon MBB's same structural design, the table is removed and in its place mounted a moveable rail system, which permits the placement of moveable clamping and pod devices on each rail. MBB'...

1 フォト
ビデオ
Brochure
thumb

CMS MBB-2T

MBB CNC mill's rigid, basic table version is, type T, seen in this photo, along with its fundamental structural elements. The MBB version is a type 2T, in width, and of a shorter table length in th...

1 フォト
ビデオ
Brochure
thumb

CMS MBB-3T

This MBB 3T version CNC mill is shown with a wider and significantly longer table. The table is a solid aluminum, gridded type, vacuum work surface to which can be secured templates or waste sheets...

1 フォト
ビデオ
Brochure
thumb

CMS MBB-4T

MBB is CMS' series of CNC machining centers with 3, 4 or 5 interpolated axes, for the high speed machining of very large panels, components or parts made from aluminum, composites, reinforced plast...

1 フォト
ビデオ
Brochure
thumb

CMS PMT

The PMT moving gantry system provides the durability and strength needed for machining large beams utilized in sports arenas and other large facilities. CMS' PMT machining center was developed due ...

Z:47.24 in
1 フォト
Brochure
thumb

CMS POSEIDON

Shot of a standard Poseidon 5 axis CNC machining center, showing its robust structure composed of two rows of heavy support pillars, joined by heavy shoulders on which the X axis guide ways are mou...

1 フォト
Brochure
thumb

CMS POSEIDON-K

Poseidon K - compact, powerful, 5 axis CNC milling machine

X:157.0 in
Y:59.0 in
Z:51.0 in
1 フォト
Brochure
thumb

KITAMURA BRIDGECENTER-10G

Features • Well suited for large part machining requiring increased rigidity and higher levels of precision and accuracy. Perfect for roughing and finishing of large cavities and cores in the die/m...

X:100.0 in
Y:63.6 in
Z:31.5 in
1 フォト
thumb

KITAMURA BRIDGECENTER-12G

Features • 120" extended X-Axis stroke offers flexibility in large part processing that requires increased levels of rigidity and higher levels of precision and accuracy. • Positioning Accuracy: ±0...

X:120.0 in
Y:63.6 in
Z:31.5 in
1 フォト
thumb

KITAMURA BRIDGECENTER-6G#40

Features • Ideal for parts requiring heavier cutting loads and higher levels of precision and accuracy. Excellent for Die/Mold applications. • Positioning Accuracy: ±0.000078”/Full Stroke, Repeata...

X:60.2 in
Y:43.1 in
Z:28.0 in
1 フォト
ビデオ
thumb

KITAMURA BRIDGECENTER-6G#50

Features • Ideal for parts requiring heavier cutting loads and parts that require a higher level of precision and accuracy. Excellent for Die/Mold applications. • Positioning Accuracy: ±0.000078”/...

X:60.2 in
Y:43.1 in
Z:28.0 in
1 フォト
ビデオ
thumb

KITAMURA BRIDGECENTER-8G#50

Features • Ideal for parts requiring heavier cutting loads, and parts that require a higher level of precision and accuracy. Excellent for Die/Mold applications. • Positioning Accuracy: ±0.000078”...

X:80.0 in
Y:43.1 in
Z:28.0 in
1 フォト
thumb

KITAMURA JIGCENTER-5

Features • Ideal for ultra-high precision simultaneous 3-axis machining. • Positioning Accuracy: ±0.000039” Full Stroke, Repeatability: ±0.00002” • Sliding overhead door allows for easy workpiece l...

X:32.0 in
Y:29.3 in
Z:19.7 in
1 フォト