展示25 モデル
thumb

IEMCA BOSS 338 HD SUPERFAST

Boss 338 HD Superfast Simple, Stiff, and Superfast The Boss line, which accounts for more than 30,000 working units over the world, has been further improved to redefine the market standard once a...

能力:1.496 in
1 フォト
ビデオ
Brochure
thumb

IEMCA ELITE 220 WET

Elite 220 Wet The solution for machines with laser cutting The Elite 220 WET is an automatic high-performance bar feeder, for bars with diameters between 2 and 20 mm, ideal for applications with m...

能力:0.787 in
1 フォト
ビデオ
thumb

IEMCA ELITE ZERO

ELITE ZERO Ultra Thin, Ultra Smooth, Ultra Fast ELITE ZERO is an automatic bar feeder for bars of diameter 0.3 to 3 mm, suitable for sliding headstock lathes. It has been developed to meet the nee...

能力:0.118 in
1 フォト
ビデオ
thumb

IEMCA IDEAL 551

Ideal 551 Inimitable, Incredible, Ideal The IDEAL 551 is an automatic bar feeder suitable for lathes with fixed and mobile headstock, bar diameters between 5 and 51 mm and lengths from 1,000 to 4,...

能力:2.0 in
1 フォト
ビデオ
thumb

IEMCA KID80+

Kid 80 + Simple, Robust, with Sub-spindle mode The KID 80+ is an automatic high-performance short bar feeder, ideal for applications on fixed headstock CNC lathes, even equipped with the sub-spind...

能力:3.15 in
1 フォト
ビデオ
thumb

IEMCA MAESTRO 80

Maestro 80 No Limits Productivity, Flexibility, Ergonomics The MAESTRO 80 NO LIMITS is an automatic bar feeder able to support bars from 10 to 80 mm ideal to work with fixed headstock lathes. For ...

能力:3.15 in
1 フォト
ビデオ
Brochure
thumb

IEMCA SIR 25

能力:0.984 in
1 フォト
ビデオ
Brochure
thumb

IEMCA SIR 36

能力:1.417 in
1 フォト
Brochure
thumb

IEMCA SIR 52

能力:2.047 in
1 フォト
ビデオ
Brochure
thumb

LNS ALPHA 538

The Alpha 538 - efficient and cost effective bar feeder The maximum productivity for feeding bars with diameters of 5 to 38 mm is ensured by this LNS Alpha 538 bar feeder. Therefore, it is especial...

能力:1.625 in
棒 長さ:12.0 ft
1 フォト
Brochure
thumb

LNS ALPHA 552

The Alpha 552 - efficient and cost effective bar feeder The LNS Alpha 552 bar feeder ensures the maximum productivity for feeding bars with diameters of 5 to 52 mm. Therfore, it is especially suite...

能力:1.875 in
棒 長さ:12.0 ft
1 フォト
Brochure
thumb

LNS GT 326-E

Automatic Magazine Bar Loader for sliding headstock lathes to run capacities listed below. Bar diameter capacity: 1/8” to .787” (3 mm to 20 mm) 1.02” max. (26 mm) with bar preparation Bar length: ...

能力:0.787 in
棒 長さ:12.3 ft
1 フォト
ビデオ
Brochure
thumb

LNS HYDROBAR

Manual Load Bar Feed for sliding or fixed headstock lathes 8 models available ranging in bar capacities from 1/16" to 2-5/8"

能力:2.625 in
棒 長さ:12.0 ft
1 フォト
thumb

LNS HYS 3.12 HS-4.8

能力:0.5 in
棒 長さ:12.0 ft
1 フォト
Brochure
thumb

LNS HYS 3.20 HS-4.8

能力:0.813 in
棒 長さ:12.0 ft
1 フォト
thumb

LNS HYS 6.32 HS-4.8

能力:1.25 in
棒 長さ:12.0 ft
1 フォト
Brochure
thumb

LNS HYS 6.38 HS-4.8

能力:1.5 in
棒 長さ:12.0 ft
1 フォト
Brochure
thumb

LNS HYS 6.42 HS-5.2

能力:1.625 in
棒 長さ:12.0 ft
1 フォト
Brochure
thumb

LNS HYS 6.52 HS-5.2

能力:2.0 in
1 フォト
Brochure
thumb

LNS HYS 6.65 HS -5.2

能力:2.5 in
1 フォト
Brochure
thumb

LNS HYS 6.68 HS-5.2

能力:2.625 in
1 フォト
thumb

LNS QUICK LOAD SERVO 105

能力:4.125 in
棒 長さ:5.25 ft
1 フォト
Brochure
thumb

LNS QUICK LOAD SERVO 80 S2

Automatic Magazine Loader Used with fixed or traveling headstock lathes Capacity: Bar Diameter: ¼” to 3-1/8” Bar Length: 14” to 63” * *Not to exceed overall length of spindle

能力:3.125 in
棒 長さ:5.25 ft
1 フォト
ビデオ
Brochure
thumb

LNS QUICK LOAD SERVO S3+

The Quick Load Servo S3+ bar feeder reliably loads 1/4” to 4-3/4” diameter bar stock in lengths from 4” to 63” (not to exceed overall spindle length). Coupled with a fully automatic diameter adjust...

能力:4.75 in
棒 長さ:5.25 ft
1 フォト
Brochure
thumb

LNS TRYTON

Automatic Magazine Bar Loader 4 Models of Standard Barrel interchangeable barrels with up to 45 totally enclosed guide tubes provide hours of uninterrupted operation 2 Models of Combo Barrel 28 (2...

能力:0.5 in
棒 長さ:12.0 ft
1 フォト
Brochure