BAILEIGH BS-127P
110 Volt Portable Metal Cutting Band Saw. 5" Round Capacity @ 90 Degrees. 3" Round Capacity @ 45 Degrees Via Mitering Head. 1/2" Blade Width. Variable Speed Control (75- 246 FPM). Weight 53LBS
BAILEIGH BS-128M
110 Volt Metal Cutting Band Saw. 5" Round Capacity @ 90 Degrees, 3-3/4" Round Capacity @ 45 Degrees, and 1-3/4" Round Capacity @ 60 Degrees Via Mitering Head. 1/2" Blade Width. Three Cutting Speeds...
BAILEIGH BS-20A
When production from a band saw is the most important thing to a shop, the best place to start is an automatic band saw. The BS-20A from Baileigh Industrial is a fully automatic band saw that can ...
BAILEIGH BS-20M-DM
Do you need to replace your current band saw because your shop has out grown it, or just looking for a new one to increase production? Then look at the BS-20M-DM dual mitering band saw from Bailei...
BAILEIGH BS-20SA-DM
The BS-20SA-DM semi-automatic band saw has evolved over the years to the model that you see today. Many innovative features are now offered in this great package. The BS-20SA-DM is a dual miterin...
BAILEIGH BS-210M
110 Volt Metal Cutting Band Saw. Mitering Head. 3/4" Blade Width. Variable Speed Control (66- 280 FPM). Includes Blade Tension Device, Direct Drive Gear Box, Manual or Hydraulic Descent and Coolant...
BAILEIGH BS-24A
When looking for a production band saw, one must look at all the ways a new saw can save money over the current unit. Baileigh Industrial took that into consideration when designing the BS-24A aut...
BAILEIGH BS-24SA-DM
Need a little more capacity than the BS-20SA-DM, and want to keep all the great features? Enter the BS-24SA-DM. Baileigh Industrial took many of the ideas that were already in place with the BS-2...
BAILEIGH BS-250M
The BS-250M horizontal band saw from Baileigh Industrial is a great saw for any fabrication shop that cuts a variety of materials and profiles. The BS-250M is an inverter driven, variable speed ba...
BAILEIGH BS-260M
Over the years, the BS-260M dual mitering band saw has gone through a number of changes. Once again we have improved it, and made it even better. Gone is the day of the DC driver board, now the B...
BAILEIGH BS-260SA
Based on the BS-260M, the BS-260SA semi-automatic band saw offers more production and faster turnaround times. The reason a semi-automatic saw is good for more production runs is that the clamping...
BAILEIGH BS-300M
The BS-300M is the perfect band saw for those shops that like the look and operation of an old time, American style band saw. It’s the perfect cutoff saw for those shops that cut many different sh...
BAILEIGH BS-330M
The BS-330M manual band saw from Baileigh Industrial has been a mainstay in our lineup since it was introduced in 2005. This saw will provide years of trouble free use in any environment. The BS-...
BAILEIGH BS-330SA
The BS-330SA semi-automatic band saw from Baileigh Industrial is based off of the BS-330M, which has been a mainstay in our lineup since it was introduced in 2005. Because of its great history, th...
BAILEIGH BS-350M
Have a job that requires multiple angles in both left and right directions? If so, the BS-350M horizontal band saw might just be the right choice for you. This dual mitering saw has a full cast i...
BAILEIGH BS-350SA
The BS-350SA semi-automatic band saw is the perfect saw for shops where light production is the normal. The BS-350SA runs on 220V, single phase power and has a cutting capacity of 10-1/2”. The be...
BAILEIGH BS-360SA
If you need to cut steel all day, every day, then the BS-360SA semi-automatic column band saw is for you. The BS-360SA from Baileigh Industrial offers a huge 14” x 22” rectangle capacity. Like al...
BAILEIGH BS-712M
110 Volt Metal Cutting Band Saw With Vertical Cutting Option. Mitering Vice. 3/4" Blade Width. Three Cutting Speeds (125, 215, 270 FPM). Includes Blade Tension Device, Direct Drive Gear Box, Hydrau...
BAILEIGH BS-712MS
110 Volt Metal Cutting Band Saw With Vertical Cutting Option. Mitering Head. 3/4" Blade Width. Three Cutting Speeds (125, 215, 270 FPM). Includes Blade Tension Device, Direct Drive Gear Box, Hydrau...
BAILEIGH BS-916M
The BS-916M horizontal band saw is based off of the BS-300M, but with a little smaller footprint for those shops with limited space. The BS-916M is modeled after the American style saw that has be...
DAKE JH10W1
Heavy duty, American made, horizontal bandsaw with a dual cast head frame for large capacity cutting. Also featuring a three point suspension, adjustable eccentric roller blade guides, centralized ...
DAKE SAR 331 SA
DAKE SAR 440 SA
DAKE SE 10 DM
Heavy duty, dual mitering saw that comes with one standard Bi-metal blade. Hydraulic controlled downfeed with automatic shut off at the end of the cut. 2.75HP, 220V motor with up to 60°right miteri...
DAKE SE 5X6 RCT
This semi-automatic benchtop horizontal bandsaw is small in size but not in power. Featuring new reverse cutting technology for cooler cutting and faster, cleaner cuts. Designed for on-the-go appli...
DAKE SE 6.5 M
Mitering bandsaw with dual operating modes and hydraulic controlled down feed. 2.5HP, 120V motor with up to 60°right mitering capabilities. Ergonomic design for operator’s comfort and control. Vari...
DAKE SE-5X8
This benchtop horizontal bandsaw is small in size but not in power. Designed for on-the-go applications this saw will cut all of the metal rounds, flats, and tubes you need right in the field. Offe...
DAKE SE-810
DAKE SE712
Standard Duty horizontal bandsaw offering accurate cutting, rugged gear box, hydraulic control, chip brush blade cleaner, and wet or dry cutting with simple operation.
DAKE SE912
ELLIS 1200
ELLIS 1600
ELLIS 1800
ELLIS 2000
ELLIS 3000
ELLIS 4000
HEM 260 BSA
The 260 is a double-mitering band saw cutting 45ᵒin both directions, up to 60ᵒ left miter, includes an adjustable hard-stop to cut multiple same-length parts, and has a built-in flood coolant syste...
HEM 320 BSA
The 320 BSA is a double-mitering band saw cutting 45ᵒin both directions, up to 60ᵒ left miter. The control is connected by a 40” umbilical cord and blade speed adjusts approximately 39 to 320 SFPM....
HEM 782XLH
The 782XLH is a versatile benchtop band saw and will cut in the upright position with an optional “work table”, will miter up to 45ᵒ in one direction in the horizontal position, and includes a hard...
HEM ABS-105
The ABS-105 is a benchtop band saw with the ability to cut miters up to 45ᵒ in one direction in the horizontal position. A two-speed motor powers a ¼” blade and the saw operates in semi-automatic m...
HEM ABS-NG120XL
The ABS-NG120XL will cut in manual pull-down or semi-automatic modes and can miter-cut up 60ᵒ in one direction. The ¼” blade is powered by a 1.7 HP variable speed motor, and a hard-stop for cutting...
HEM ABS-NG160
The ABS-NG160 benchtop band saw will miter-cut up to 45ᵒ in one direction. It will cut with manual pull-down or semi-automatic modes. A ½” wide blade is powered by a 2.7 HP motor and a hard-stop is...
HEM CYCLONE A-4
The Cyclone A-4 makes cutting 45ᵒ miter cuts in one direction perfect for cutting small solids and shapes. With a 24” indexing bar-feed and up to 4 indexes, cutting multiple parts in longer than 24...
HEM CYCLONE A-C
Product Description The Cyclone A-C multiple indexes with a 24” bar-feed, saves up to 99 jobs, sawing one job or multiple jobs of differing lengths and quantities in sequence. Each job includes job...
HEM CYCLONE M
Product Description The Cyclone M miters to 60ᵒ one direction, is ideal for cutting solids and structural shapes with a 1¼” blade and 7½ HP motor. The control console, mounted on a swing arm, allow...
HEM H105A-4
The H105A-4 model includes a 7½ HP motor and a 1¼” blade with a 24” stroke bar-feed that will index up to 4 times cutting up to 999 parts of the same length. This scissor style saw is perfect for c...
HEM H105A-C
The H105A-C includes a 24” bar-feed and allows multiple indexes and the ability to create and save up to 99 jobs. Each job includes a job number, the part length, and quantity and runs consecutive ...
HEM H105LA-4
Horizontal Pivot Band Saw Capacity: 20″ W x 16″ H Bar-feed: 0-24″ (4 Indexes) Blade: 15’8″ x 1.25″ x .042″ Motor: 7.5 HP Operation: Automatic
HEM H105LA-C
Horizontal Pivot Band Saw Capacity: 20″ W x 16″ H Bar-feed: 0-24″ (Multiple Index) Blade: 15’8″ x 1.25″ x .042″ Motor: 7.5 HP Operation: Automatic
HEM H105LM
Horizontal Pivot Band Saw Capacity: 20″ W x 16″ H Blade: 15’8″ x 1.25″ x .042″ Motor: 7.5 HP Operation: Manual/Semi-Automatic