1 - 50の264 モデル
thumb

DANOBAT CL-13

For required high productivity, coupling machining may be done on the CL and CIH range of turning centers. Coupling threading may be done in a single clamping on the CIH range of machines.

1 フォト
thumb

DANOBAT CL-20

For required high productivity, coupling machining may be done on the CL and CIH range of turning centers. Coupling threading may be done in a single clamping on the CIH range of machines.

1 フォト
thumb

DANOBAT CL-24

For required high productivity, coupling machining may be done on the CL and CIH range of turning centers. Coupling threading may be done in a single clamping on the CIH range of machines.

1 フォト
thumb

DANOBAT CL-7

For required high productivity, coupling machining may be done on the CL and CIH range of turning centers. Coupling threading may be done in a single clamping on the CIH range of machines.

1 フォト
thumb

DANOBAT TT-TTB10

DANOBAT offers tailor-made solutions for the machining of pipe ends. With rotating pipe and stationary tools technology the most distinctive feature is the machine rigidity and optimal chip removal...

1 フォト
thumb

DANOBAT TT-TTB13

DANOBAT offers tailor-made solutions for the machining of pipe ends. With rotating pipe and stationary tools technology the most distinctive feature is the machine rigidity and optimal chip removal...

1 フォト
thumb

DANOBAT TT-TTB16

DANOBAT offers tailor-made solutions for the machining of pipe ends. With rotating pipe and stationary tools technology the most distinctive feature is the machine rigidity and optimal chip removal...

1 フォト
thumb

DANOBAT TT-TTB20

DANOBAT offers tailor-made solutions for the machining of pipe ends. With rotating pipe and stationary tools technology the most distinctive feature is the machine rigidity and optimal chip removal...

1 フォト
thumb

DANOBAT TT-TTB24

DANOBAT offers tailor-made solutions for the machining of pipe ends. With rotating pipe and stationary tools technology the most distinctive feature is the machine rigidity and optimal chip removal...

1 フォト
thumb

DANOBAT TT-TTB7

DANOBAT offers tailor-made solutions for the machining of pipe ends. With rotating pipe and stationary tools technology the most distinctive feature is the machine rigidity and optimal chip removal...

1 フォト
thumb

DANOBAT TV-650

These vertical lathes have been especially designed for automotive, aerospace, railways, bearings and oil & gas industries among others. Typical operations of this range of vertical lathes include...

スイング:31.4 in
1 フォト
thumb

GURUTZPE A-1000 2G

The A-1000 model lathe stands out because of its prismatics guides in the inverted “V” which allow an automatic readjustment and a rectiliniar trajectory of the carriage over the bed. Besides the ...

スイング:39.37 in
#Axis:2
1 フォト
Brochure
thumb

GURUTZPE A-1000 4G

The A-1000 4G model lathe represents the embodiment to the Gurutzpe 4 guide-way principle. Its singularity lies in the great versatility which allows the carriage to pass in fron of the tailstock ...

スイング:34.25 in
#Axis:2
1 フォト
Brochure
thumb

GURUTZPE A-1000/900 2G

The A-1000 model lathe stands out because of its prismatics guides in the inverted “V” which allow an automatic readjustment and a rectiliniar trajectory of the carriage over the bed. Besides the ...

スイング:35.43 in
#Axis:2
1 フォト
Brochure
thumb

GURUTZPE A-1200 2G

The A-1200 model lathe combines the same characteristics of the A-1000 model with an increase in the width of the prismatic guides up to 80 mm and a Standard static ballscrew in the longitudinal ax...

スイング:47.24 in
#Axis:2
1 フォト
Brochure
thumb

GURUTZPE A-1200 4G

The A-1200 4G model lathe allows the machinign of pieces up to 12 meters. The longitudinal feed with double pinion rack system is proviced for lathes of more 8 meters long. This model comprises a...

スイング:47.24 in
#Axis:2
1 フォト
Brochure
thumb

GURUTZPE A-1200/1100 2G

The A-1200 model lathe combines the same characteristics of the A-1000 model with an increase in the width of the prismatic guides up to 80 mm and a Standard static ballscrew in the longitudinal ax...

スイング:43.31 in
#Axis:2
1 フォト
Brochure
thumb

GURUTZPE A-1600 2G

The A-1600 model lathe offers the features and options of the A-1200 Gurutzpe lathe with prismatic guides of 120 mm and a bed of 1.100 mm width Vich offes a significant “jump” in the machinig capac...

スイング:62.99 in
#Axis:2
1 フォト
Brochure
thumb

GURUTZPE A-1600/1350 4G

The A-1600 4G lathe represents the best option in the market for machinig pieces up to 15 meters, 15 tons and diameters up to 1,300 mm thanks to its invertid “V” prismatic guides of 120 mm and its ...

スイング:53.15 in
#Axis:2
1 フォト
Brochure
thumb

GURUTZPE A-1600/1400 2G

The A-1600 model lathe offers the features and options of the A-1200 Gurutzpe lathe with prismatic guides of 120 mm and a bed of 1.100 mm width Vich offes a significant “jump” in the machinig capac...

スイング:55.12 in
#Axis:2
1 フォト
Brochure
thumb

GURUTZPE A-1600/1550 4G

The A-1600 4G lathe represents the best option in the market for machinig pieces up to 15 meters, 15 tons and diameters up to 1,300 mm thanks to its invertid “V” prismatic guides of 120 mm and its ...

スイング:61.02 in
#Axis:2
1 フォト
Brochure
thumb

GURUTZPE A-2000/1850 4G

The model A-2000 4G lathe has been created taking into account the current demands in the market for the machining pieces with big swing and heavy weight. This lathe allows to machine pieces up to...

スイング:72.83 in
#Axis:2
1 フォト
thumb

GURUTZPE A-2000/2050 4G

The model A-2000 4G lathe has been created taking into account the current demands in the market for the machining pieces with big swing and heavy weight. This lathe allows to machine pieces up to...

スイング:80.71 in
#Axis:2
1 フォト
thumb

GURUTZPE B-2200 4G

The B-2200 4G model lathe represents the best option for machining heavy pieces (between 20 and 35 tons). This model also allows to machine pieces of diameter up to 2,200 mm thanks to the rigidity ...

スイング:86.61 in
#Axis:2
1 フォト
Brochure
thumb

GURUTZPE B-2200/2400 4G

The B-2200 4G model lathe represents the best option for machining heavy pieces (between 20 and 35 tons). This model also allows to machine pieces of diameter up to 2,200 mm thanks to the rigidity ...

スイング:94.49 in
#Axis:2
1 フォト
Brochure
thumb

GURUTZPE G-POWER/1550

Our generator shaft lathe is specially designed for making the big size shafts for energy generation. It has been developped in order to get the maximum optimization in the machining times.

スイング:61.02 in
#Axis:2
1 フォト
thumb

GURUTZPE G-POWER/2050

Our generator shaft lathe is specially designed for making the big size shafts for energy generation. It has been developped in order to get the maximum optimization in the machining times.

スイング:80.71 in
#Axis:2
1 フォト
thumb

GURUTZPE G-WIND/1850

Model specially desgined for machining big wind mill shafts. It has been developped in order to get the maximum optimization in the machining times.

スイング:72.83 in
#Axis:2
1 フォト
thumb

GURUTZPE G-WIND/2050

Model specially desgined for machining big wind mill shafts. It has been developped in order to get the maximum optimization in the machining times.

スイング:80.71 in
#Axis:2
1 フォト
thumb

MAZAK CYBERTECH TURN 4500M

スイング:33.8 in
1 フォト
thumb

MAZAK CYBERTECH TURN 4500MT

スイング:33.8 in
1 フォト
thumb

MAZAK CYBERTECH TURN 5500

スイング:36.0 in
1 フォト
thumb

MAZAK CYBERTECH TURN 5500M

スイング:36.0 in
1 フォト
thumb

MAZAK CYBERTECH TURN 5500MT

スイング:36.0 in
1 フォト
thumb

MAZAK CYBERTECH TURN 5500T

スイング:36.02 in
加工長:119.1 in
1 フォト
thumb

MAZAK DUAL TURN 20

スイング:12.6 in
加工長:49.21 in
#Axis:2
1 フォト
thumb

MAZAK DUAL TURN 200

The DUAL TURN 200 is a twin-spindle, twin-turret turning center designed for high productivity. With a mirror image design of headstocks and turrets plus automatic workpiece transfer from one spind...

スイング:12.6 in
加工長:5.906 in
#Axis:4
1 フォト
thumb

MAZAK HQR-100MSY

MACHINE DESCRIPTION: The HQR-100MSY Multi-Tasking turning center features a highly productive twin-spindle, twin-turret configuration for unequaled part processing opportunities and high-volume thr...

スイング:12.6 in
加工長:24.38 in
1 フォト
thumb

MAZAK HQR-150MSY

MACHINE DESCRIPTION: The HQR-150MSY Multi-Tasking turning center features a highly productive twin-spindle, twin-turret configuration for unequaled part processing opportunities and high-volume thr...

スイング:12.6 in
加工長:24.38 in
1 フォト
thumb

MAZAK HQR-200MS-1300U

MACHINE DESCRIPTION: The HQR-200MS Multi-Tasking turning center features a highly productive twin-spindle, twin-turret configuration for unequaled part processing opportunities and high-volume thro...

スイング:14.6 in
加工長:52.2 in
1 フォト
thumb

MAZAK HQR-200MS-850U

MACHINE DESCRIPTION: The HQR-200MS Multi-Tasking turning center features a highly productive twin-spindle, twin-turret configuration for unequaled part processing opportunities and high-volume thro...

スイング:14.6 in
加工長:33.9 in
1 フォト
thumb

MAZAK HQR-200MSY-1300U

MACHINE DESCRIPTION: The HQR-200MSY Multi-Tasking turning center features a highly productive twin-spindle, twin-turret configuration for unequaled part processing opportunities and high-volume thr...

スイング:14.6 in
加工長:52.2 in
1 フォト
thumb

MAZAK HQR-200MSY-850U

MACHINE DESCRIPTION: The HQR-200MSY Multi-Tasking turning center features a highly productive twin-spindle, twin-turret configuration for unequaled part processing opportunities and high-volume thr...

スイング:14.6 in
加工長:33.9 in
1 フォト
thumb

MAZAK HQR-200MY

The HQR-200MY Multi-Tasking turning center features a highly productive twin-turret and tailstock configuration for unequaled part processing opportunities and high-volume throughput. It machines c...

スイング:14.6 in
加工長:33.9 in
#Axis:3
1 フォト
thumb

MAZAK HQR-250MS-1300U

MACHINE DESCRIPTION: The HQR-250MS Multi-Tasking turning center features a highly productive twin-spindle, twin-turret configuration for unequaled part processing opportunities and high-volume thro...

スイング:14.6 in
加工長:52.2 in
1 フォト
thumb

MAZAK HQR-250MS-850U

MACHINE DESCRIPTION: The HQR-250MS Multi-Tasking turning center features a highly productive twin-spindle, twin-turret configuration for unequaled part processing opportunities and high-volume thro...

スイング:14.6 in
加工長:33.9 in
1 フォト
thumb

MAZAK HQR-250MSY-1300U

MACHINE DESCRIPTION: The HQR-250MSY Multi-Tasking turning center features a highly productive twin-spindle, twin-turret configuration for unequaled part processing opportunities and high-volume thr...

スイング:14.6 in
加工長:52.2 in
1 フォト
thumb

MAZAK HQR-250MSY-850U

MACHINE DESCRIPTION: The HQR-250MSY Multi-Tasking turning center features a highly productive twin-spindle, twin-turret configuration for unequaled part processing opportunities and high-volume thr...

スイング:14.6 in
加工長:33.9 in
1 フォト
thumb

MAZAK HQR-250MY

The HQR-250MY Multi-Tasking turning center features a highly productive twin-turret and tailstock configuration for unequaled part processing opportunities and high-volume throughput. It machines c...

スイング:14.6 in
加工長:33.9 in
#Axis:3
1 フォト
thumb

MAZAK HYPER QUADREX 400MY

MACHINE DESCRIPTION: The HYPER QUADREX 400MY Multi-Tasking turning center brings high-volume throughput and heavy material removal to large-diameter part applications, including shafts and pipes. I...

スイング:33.07 in
加工長:83.08 in
1 フォト