PFAUTER P1251ギアー ホバー

ID:137976
ブランド:PFAUTER
モデル:P1251
タイプ:ギアー ホバー
年:1978
売り主:販売者が誰であるかを見せて...
場所:Connecticut
アメリカ合衆国
在庫No.:P1251-25-276
価格:

スペック

Lower:97
最大径 ギアー:1,524 mm
最大 デイアメトラル ピッチ:1.6
水平/垂直:Vert
Upper:117
大きさ:292"x170"x138"
重量:~50,700lbs

Maximum Workpiece Diameter w/center support....49.25”, 1251mm
Maximum Workpiece Diameter wo/center support...60.00”, 1524mm
Maximum Axial Travel...........................39.37”, 1000mm
Maximum DP / Module in Steel...................1.6 DP, 15.87 MOD
Minimum # of teeth (single-start index drive)..20 teeth
Center Distance Between Workpiece & Hob........2.36”, 60 mm min.
Center Distance Between Workpiece & Hob........31.5”, 800mm max.
Maximum Hob Diameter...........................10”, 254 mm
Maximum Hob Length.............................11”, 280mm
Maximum Hob Travel.............................9.85”, 250mm
Diameter of hob arbors.........................1”,1.25”,1.5”,2”
Taper for hob arbors...........................Morse # 5

Diameter of Work Table.........................47.24”, 1200mm
Table Weight Capacity..........................11000Lbs, 5,000 kg
Diameter of Work Table Bore....................12”, 305mm
Work Arbor Diameter............................2.5”, 63.5mm

Speeds & Feeds (infinitely variable):
- Hob Speeds...................................30 – 180 RPM
- Axial Feed...................................0.020 - 0.240 IPR, 0.5 – 6.000 mm/pr
- Radial Feed..................................0.007 - 0.084 IPR, 0.170 – 2.000 mm/pr
Tangential Feed................................0.008 - 0.096 IPR, 0.200 – 2.500 mm/pr

Electrical:
Volts..........................................240 VAC
Phase..........................................3 phase
Frequency......................................60 Hz
Load of Machine (approx.)......................32 kVA

Dimensions (including space required to remove):
Length.........................................291.80”, 7412mm
Width..........................................169.80”, 4313mm
Height.........................................137.75”, 3500mm
Weight (approx.)...............................50,700lbs, 23,000kg

Equipped With:

Full Pendant Control
Automatic Hob Shifting
Two Cut Work-cycle
Index & Differential Change Gears
Universal Hob Head w/ Long Tangential Travel
Single IndexTangential Cutting
Coolant and Hydraulic Oil Coolers
Chip Conveyor
Tailstock and Hob Arbors
Operator Platform and Stairs

These machines are in mint condition as taken from General Electrical Marine Propulsion Division

詳細

Pfauter Universal Gear Hobbing Machine (precision series) P-1251 sn 25-276 and 25-277

このモデルの詳細

の詳細について表示するには、 PFAUTER P1251レビュー、ブランド情報、写真、ビデオ、および多くを含むが、 ここをクリック