BYARD CL2000/25パイプ加工機

ID:158143
ブランド:BYARD
モデル:CL2000/25
タイプ:パイプ加工機
年:2008
売り主:販売者が誰であるかを見せて...
場所:シンガポール
在庫No.:SPM2000
価格:

スペック

Lower:18
パイプ 径:100 "
Upper:38
大きさ:100" x 25.4mm

We are pleased to offer SUBJECT TO PRIOR SALE and to the CONDITIONS OF SALE below, the following UNUSED spiral mill and external bitumen coating line for your consideration.

ONE (1) BYARD MODEL CL2000/20 SPIRAL WELD STEEL PIPE MILL
CONDITION: UN-USED, INSTALLED AND COMMISSIONED – TESTED WITH ONE COIL ONLY
AVAILABILITY: Two (2) to Three (3) Months

TEMPORARY TECHNICAL SPECIFICATIONS AS PER OEM:
INTRODUCTION:
The Byard Spiral Weld Pipe Mill enables the customer(s) Tubes & Pipes business to operate to best world practice in the manufacture and supply
of large diameter, heavy wall submerged arc-welded pipe to an extensive cross section of the industry.

The Spiral Weld Pipe Mill produces the most demanding of products including heavy wall high strength linepipe and associated mother pipe of bends,
conductor pipe and carrier pipe for the energy industries, process pipe for refinery work, pressure pipe for water supply and sewage disposal and tubular
piling jetties and berthing dolphins.

This mill is capable of producing pipe ranging from 457mm diameter to 2540mm diameter and in wall thickness from 6,0mm to 25.4mm, in steel grades up to API 5L X70.

Advantages Include:
• Extensive size range – the ability to supply non-standard diameters be arrangement
• Steel grades to API 5L X70
• Critical offshore application capabilities
• Up-to-the-minute welding technology offering single welding system
• State-of-the-art on-line computerized seam tracking system (optional)
• Length of pipe up to 30 meters if required (on site manufacture) (optional)
• On-line Ultrasonic Inspection System (optional)

TEMPORARY TECHNICAL SPECIFICATIONS AS PER OEM CATALOGE:
PIPE SPECIFICATIONS:
- Pipe diameter 457 mm – 2540 mm
- Pipe wall thickness 6 mm – 25.4 mm
- Forming angle 46 deg – 82 deg
- Pipe length 6000 mm – 12,500 mm
- Pipe standard up to API 5L X70

STEEL STRIP MATERIAL SPECIFICATIONS:
- Strip width 850 mm – 2000 mm
- Wall thickness 6 mm – 25.4 mm
- Coil outside diameter 1200 mm – 2000 mm
- Coil inside bore diameter 700 mm – 760 mm
- Coil weight up to 35,000 kgs

ELECTRICAL SUPPLY:
- 415 V, 3 Phase, 50 Hz
- Spiral weld pipe mill consumption (approx.) 150 kW
- Tandem sub-merged arc welding (approx.) 200 kW
- Electric console cabinet
- Brevini 210,000 Nm gear boxes (2)
- +/- 10%

SPIRAL MILL DIMENSIONS:
- Weight, approximate 250 tonnes

INCLUDED WITH THE SPIRAL MILL:
• Uncoiler – adjustable height;
• Coil leveling (4 top rollers and 3 bottom rollers, with SKF/NTN Spherical Bearings);
• Feed table;
• Brevini Planetary Gearboxes for top and bottom rollers which gives approximately 95% efficiency. Complete with AC motors which are
Easier to maintain and inexpensive to re-wind or replace in the event of failure;
• Coil butting station (Cut and Weld);
• Left and Right 600 mm strip edge milling and chamfering machine mounted on spindle with duplex chain drive from
75 kW AC electric motor connected to Brevini in line planetary gearbox. Both left and right milling heads have pivoting
system, controlled by bottom guide rollers and also hydraulic cylinders mounted with top rollers to ensure that the root face
remains constant;
• Hydraulic helix angle capability;
• Formation table has top anchor frame which has two (2) jacuators to position height of boom, two (2) jacuators on plinth to lock boom in place.
Speeds up pipe change-over;
• Welding system has only single welding heads on internal and external only. DC1000 rectifiers + NA5 control panel & NA5 welding head;
• Flux feed hopper and flux magnetic separator;
• Gate(s);
• Pay-off table (12.5 meters);
• Oxygen Acetylene on Cross Butt;
• Hydraulic pump and tanks;
• Main control panel with Siemens/Lenze drives, chokes, fuses, etc.;
• Cabling for connecting motors to drives;

PRODUCTION CAPACITY OF MILL IS BASED ON AN OPERATING TIME (TI) OF 20 HOUR DAY = 1200 MIN/DAY WITH
A PRODUCTION FACTOR OF 0.80 = 960

- Outside diameter (D) 2000 mm
- Wall thickness (t) 22 mm
- Strip width (B) 2000 mm
- Production time (T2) 960 min
- Pipe length/day (LI) 185 m/day
- Seam length/day (L2) 574 m/day
- Welding speed (VI) 600 mm/min
- Axial speed (V2) 193 mm/min

WELDING SPEED PROCESS WITH SINGLE WIRE 4.00 MM DIAMETER ON INTERNAL AND EXTERNAL HEADS.
WITH TANDEM SUBMERGED ARC HEADS, WELDING SPEED CAN BE INCREASED BY 30% TO 50%.
NOTE: TANDEM SHOULD BE USED ON PIPE DIAMETERS IN EXCESS OF 1016 MM:
- 6 mm 1.55 m/min
- 8 mm 1.40 m/min
- 10 mm 1.20 m/min
- 12 mm 1.15 m/min
- 16 mm 0.70 m/min
- 19 mm 0.50 m/min
- 22 mm 0.40 m/min
- 25 mm 0.35 m/min

CONDITION: NEW 2008 – NEVER USED BY PRESENT OWNER

NOTE:
PRESENT MILL CONFIGURATION IS FOR WATER PIPE PRODUCTION ONLY

PRICE…………………..EX-WORKS………….……SOUTH EAST ASIA…………………………. US$ P.O.R.
(DISMANTLING AND EXPORT PACKAGING AT EXTRA COST TO THE PURCHASER)

PAYMENT TERMS: PAYMENT IN FULL WITH THE PURCHASE ORDER

ONE (1) BYARD MODEL BL2000 EXTERNAL BITUMEN COATING SYSTEM
CONDITION: NEW – NEVER USED
AVAILABILITY: Two (2) to Three (3) Months

This Bitumen coating station is to allow for the External Lining of the pipe to prevent corrosion of pipe.

TEMPORARY TECHNICAL SPECIFICATIONS AS PER OEM:
Minimum diameter of pipe - 610 mm
Maximum diameter of pipe - 2032 mm
Minimum length of pipe - 8 mts
Maximum length of pipe - 13 mts
Maximum weight of pipe - 20 tons

The external coating system comprises of the following equipment:
1. Main Bitumen heating tank
2. Bitumen dispensing tank
3. Pipe carriage complete with rotators
4. Fiber tape dispenser mounted on main heating tank platform
5. All electric motors, gearboxes, control systems, heating process

The primed pipe is lifted or rolled onto the pipe carriage ready for coating process to commence.

The main Bitumen tank holds approximately 2000 liters of Bitumen, which is added and melted down to the required temperature. The main Bitumen tank is heated by
diesel fuel pressure sprayed into the burner cavity which heats the blocks of bitumen. The diesel usage is approximately 90 liters per day.

The operator loads the dispensing tank, which is situated adjacent to the main tank, with the required load, and the pipe rotators are started. The pipe travels past the
Bitumen dispensing tank, rotating at a pre-determined speed, which allows an overlap of bitumen to be applied at the required thickness.

As the pipe travels and rotates, the operator applies glass fiber tape to the pipe and this tape is incorporated into the body of the Bitumen coating. After the first coat of
Bitumen and fiber tape are applied, the pipe trolley is reversed and a second coat of Bitumen is applied. This final run allows for the required thickness to be achieved.

As the final coat is applied, another operator travels behind to apply a coat of lime wash by brush. This is to protect the Bitumen from direct sunlight.

Once the Bitumen has been applied, the operator trims back the ends to ensure that the Bitumen does not encroach upon pipe spigot end area. This is carried out by trowel
which has been pre-heated by propane torch.

The pipe is then ready to be lifted from the pipe rotators onto the pipe storage area.

PRICE…………………..EX-WORKS………….……SOUTH EAST ASIA……………………. US$ P.O.R.
(DISMANTLING AND EXPORT PACKAGING AT EXTRA COST TO THE PURCHASER)

PAYMENT TERMS: PAYMENT IN FULL WITH THE PURCHASE ORDER

These temporary technical specifications are correct to the best of our knowledge, obtained from sources deemed reliable, and are
subject to change and amplification. All parts and accessories normally included when purchasing a new machine are not included
in this sale unless specifically detailed in this quotation. Machines which we offer for sale do not conform to OSHA standards.
Safety features, as required by OSHA, must be added by the purchaser before the machine is put into operation. However, it is your
responsibility to inspect the machine prior to the sale to confirm accuracy.

If you require additional information, please contact us.

Best regards,

Harold Hollander
318 Rosemary Road
Toronto, Ontario M5P 3E3 Canada
Tel: 1-416-489-8313
Fax: 1-416-489-9930
email: harold@pipemillmachines.com
Website: www.pipemillmachines.com
Skype: CrownHollander

div. of
Crown Hollander Machinery Inc.

CROWN HOLLANDER MACHINERY INC.
CONDITIONS OF SALE

ACCEPTANCE: The goods being offered herein are subject to prior sale and are intended for immediate acceptance. By the issuance of a purchase order, Buyer accepts completely and exclusively the terms and conditions herein, which constitute the entire contract. Crown Hollander Machinery Inc (“CHM”) shall not be bound by any other terms contained within the Buyer’s purchase order or any other document which attempts to impose conditions at variance with terms and conditions of this quotations unless said variance is specially agreed to in writing by a duly authorized officer of CHM. All quotations and acceptances of orders are made with the mutual understanding that the orders are not subject to cancellation. The shipping date is approximate only and may be subject to delays and availability of goods. This agreement shall be an ONTARIO contract and shall be interpreted and administered for all purposes under the laws of the PROVINCE of ONTARIO. The covenants expressed herein shall be severable, and the invalidity, now or in the future, of any of the covenants recited herein shall not affect the validity of the remaining covenants.

TERMS: Terms are cash with order and before removal of goods, unless otherwise agreed to in writing. It is understood that there are no conditions or agreements outside of this written quotation and that all prior conversations, agreements, or representations with reference to its subject matter are superseded. All sales are subject to applicable Federal, Provincial, State, and local use, sales and excise taxes which the Buyer agrees to pay, and which may be billed as part of the selling price, or separately, if CHM is required by any taxing authority to collect and pay such a tax. A one-percent (1%) monthly service charge will be added to all balances past due from the date of delivery.

TITLE: Where less than the entire purchase price (including taxes) is to be paid prior to delivery, title shall not pass to Buyer with delivery of the above personal property, but shall remain vested in CHM until the entire purchase price (including taxes) is paid. In the event that title is transferred or deemed to have been transferred by operation of law or otherwise, Buyer hereby grants and transferred to CHM, a security interest in favor of CHM in and to all machinery and equipment purchased from CHM pursuant hereto which shall come into Buyer’s control or actual or constructive possession. This security interest shall secure the timely payment of all sums due to CHM from Buyer. Buyer agrees to sign and deliver to CHM such financing statements and such other documents as may be reasonably required for public filing or any other reason, all in form satisfactory to CHM and/or its attorneys as may, from time to time, be requested. CHM may, at its sole discretion, file any such financing statements or other documents. Buyer further agrees to pay any and all costs incurred by CHM (including reasonable attorney’s fees) in connection with the documentation and perfection of CHM’s security interest, in the event that Buyer refuses to execute and deliver such statements within one (1) day of receipt thereof, the Buyer hereby irrevocably appoints any present or future officer of CHM as its lawful attorney in fact to take possession of, and to endorse in the name of the undersigned, any financing statement or similar instrument.

CLAIMS: In the event of any breach of this sales agreement by CHM, it is expressly agreed that the Buyer’s sole and exclusive remedy shall be limited to a return of the goods, freight prepaid, for a refund of the purchase price only. CHM shall not accept, for refund, goods altered in any way. In no event shall CHM be responsible for any special or consequential damages.

WARRANTY: The goods described herein are pre-owned used goods and are offered, “as is”, unless otherwise noted herein. CHM makes no warranties of any kind whatever, express or implied, and ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED AND EXCLUDED FROM THIS AGREEMENT. All specifications and descriptions of said goods are approximate only. CHM makes no representation or warranty that said goods conform to any specification, description, condition, or performance. It is the Buyer’s responsibility to inspect the goods and ascertain if the specifications, description, and condition of the goods conform to the Buyer’s requirements. Any warranty concerning said goods made by a third party is enforceable only against the third party and not CHM. CHM reserves the right to correct typographical errors herein.

GUARANTEE: CHM guarantees that, unless otherwise indicated in this proposal, every machine will be mechanically satisfactory for a period of 30 days from date of shipment. Machines found to be unsatisfactory within the stated time will, upon Buyer’s written notification to CHM and at CHM’s option, be repaired at CHM’s expense or returned by the Buyer with written authorization by CHM, freight prepaid, for full refund of purchase price less the cost of special tooling, fixtures, or repairs ordered by Buyer. It is expressly understood by Buyer that this guarantee extends only to Buyer to the exclusion of all third parties, that CHM’s liability is limited under “CLAIMS”, and that any “CONDITIONS OF SALE” that may be in conflict with this paragraph supersede the terms of this Guarantee.

MACHINE USE AND SAFETY: Buyer acknowledges that the goods described herein are pre-owned used goods which were neither designed nor manufactured by CHM, nor has CHM knowledge of, or control over, the prior use or misuse of said goods; nor does CHM have knowledge or control over the future application of these goods by the Buyer. It is the Buyer’s (user’s) sole responsibility to provide proper safety devices and equipment for any particular use, operation, or setup, to obtain manufacturer’s instruction manuals and materials and to take all necessary steps to conform to all Federal, Provincial, State and local government safety standards and all industry safety standards, including OSHA. In consideration of one dollar ($1.00), delivery of the subject machinery and/or equipment, and other good and valuable consideration, the receipt and sufficiency of which is hereby acknowledged, Buyer, for itself, its successors and its assigns, does hereby remise, release, and forever discharge CHM, its successors and assigns, of and from all claims, demands, rights, and causes of action of whatsoever kind of nature that it has or may have against CHM arising from or out of any use whatsoever (including resale) of the machinery or equipment sold pursuant to this agreement.

INDEMNIFICATION: Buyer agrees to indemnify, hold harmless and defend CHM, its employees, subsidiaries, affiliates, or agents of and from any and all claims or liabilities involving, or alleged to involve, these goods, which are caused by acts or omissions of the Buyer, his employees, assigns, or agents.

詳細

Byard CL2000/25 Spiral Pipe Mill Built in 2008 and unused since commissioning

このモデルの詳細

の詳細について表示するには、 BYARD CL2000/25レビュー、ブランド情報、写真、ビデオ、および多くを含むが、 ここをクリック