TAYLOR WINFIELDシーム溶接機

ID:204881
ブランド:TAYLOR WINFIELD
タイプ:シーム溶接機
シリアルNo.:54532
場所:Tennessee
アメリカ合衆国
在庫No.:5240
価格:

スペック

Lower:84
パワー:30 kV·A
Upper:104
スロート 深さ:18 "

詳細

Taylor Winfield Circumferential Seam Welder:

Model # LSCB-18-LGD, Original Serial No. 54532

30 KVA / 220 Volts / 60 Hz / Single Phase / AC

18” throat depth

0.75 to 2.5 secondary voltage range, adjustable with tap switch

8-step transformer tap switch, with series/parallel

16 total steps of coarse weld heat regulation

10,000 maximum secondary amps, short circuit

4.5” diameter air cylinder, with long stroke (approximately 4” +)

1,272 pounds of weld force available @ 80 PSI

Transformer, control and weld heads are water-cooled

Lower weld wheel is gear driven, upper is an idler (not driven)

Weld wheels will be designed & installed to suit your specific application

Machine initiation will be a two (2) stage shrouded foot switch

Machine will be equipped with a new or refurbished current model microprocessor type welding control with fully programmable functions and a 1200-amp water-cooled SCR firing contactor.

Also included in the control will be a normally extra-cost 200-amp circuit breaker type machine disconnect switch, with flange mounted operator, safety interlocked per OSHA standards