MANFORD CV-400垂直ミルズ

ID:21577
ブランド:MANFORD
モデル:CV-400
タイプ:垂直ミルズ
条件:新しい在庫がある
年:2017
場所:California
アメリカ合衆国
価格:
$30,000.00 USD

スペック

Lower:51
表A-W:10 "
表A-L:54 "
トラベル-長さ方向:33 "
トラベル-クロス:15 "
パワー:3 hp
Upper:71
回転数:4500 rpm
テーパー:R8
大きさ:72-7/8”x74-3/4”x83-1/2”
重量:3080 lbs
管理:CNC (Acu-Rite Millpwr or Fagor 8055i)

Specification:

Table: 10” x 54”
T-slot No. x Size:3x5/8”
Longitudinal travel:32-5/8”
Cross travel:15”
Travel of knee:14”
Travel of Z axis(Quill):4.5”
Ram travel:22”
Table to spindle nose:5-7/8” - 9-7/8”
Over swivel on turret:360。
Swiveling angle and head ( R & L ):90。
Head tilt(Up & Down):45 degree;
Spindle to column :6-1/4” – 28-1/4”
Spindle motor:3HP, 3 Phase, 220/440V
Spindle taper:NST#30 or R8
Longitudinal/cross feed rate:0 – 120 in/min
Quill feed:0.0015”-0.003”-0.006”
Spindle Speed (r. p.m.):(60Hz)60-4500
Length X Width X Height (AXBXC):72-7/8”x74-3/4”x83-1/2”
Net Weight:3080 lbs.

Includes XY precision ball screw installed, XY brackets,
Motor mounting plate & pulleys,
CV-400 With Fagor 8055i 3-Axis CNC Controller package $30,000.00;
With Acu-Rite Millpwr 3-Axis CNC Controller package $29,000;
With Acu-Rite Millpwr 2-1/2 Axis CNC Controller package $25,000; 2-axis CNC & Quill with scale
CV-500 EVS head With Fagor 8055i 3-Axis CNC Controller package $33,000.00;
With Acu-Rite Millpwr 3-Axis CNC Controller package $32,000;
With Acu-Rite Millpwr 2-1/2 Axis CNC Controller package $28,000; 2-axis CNC & Quill with scale
Fagor 8055i Package Includes:

-3 Axis 8055 i Mill Control
-10.4 inch Color LCD screen
-Conversational (ICON) / G-Code Programming
-Memory: 3mg of memory card (expandable)
-Solid Graphics
-Custom screen and software
-Profile Editor
-Setup assistant: Electronic Ball Bar Test / Oscilloscope Functions
-WINDNC communication software
-PLC 16/8
-Relays: Spindle on/off, coolant on/off, emergency button
-Built-in surface mount hand wheel

Servo Drive System
-(3) 29 in. lb. DC servos / 3000 RPM
-(3) Drives
-(3) 10 or 12 meter servo cables

詳細

Fagor 8055 i control 3-axis CNC or Acu-Rite Millpwr G2 CNC
10” X 54” Table
Variable speed, 3HP, 3 Phase, 220/440V
R8 or NST#30 Spindle material SAE4115(SCM415) full piece by hardened & ground
Turcite-B On XY ways, slideways & GibslHardened & Ground X&Y Slideways and table
32mm Precision ground Ball screws on XY
Grinding on Ram & column slideways
Grinding on table T-slot
Hardened & ground on QuillLeveling Screw & Plate On Base.
Strict Scraping with High Precise Accuracy.
Tool box & Tools
Rubber chip cover (front & rear )
Auto Lubrication system
Work light included

このモデルの詳細

の詳細について表示するには、 MANFORD CV-400レビュー、ブランド情報、写真、ビデオ、および多くを含むが、 ここをクリック