GANESH VFM-4024立型マシニングセンタ

ID:231347
ブランド:GANESH
モデル:VFM-4024
タイプ:立型マシニングセンタ
条件:新しい在庫がある
年:2017
コントロール:CNC (Mitsubishi M720 CNC Control)
売り主:販売者が誰であるかを見せて...
場所:California
アメリカ合衆国
価格:

スペック

Lower:31
X:1,000 mm
Y:599.9 mm
Z:561.8 mm
パワー:22.4 kW
回転数:12000 rpm
#ATC:24
Upper:51
表A-W:499.9 mm
表A-L:1,100 mm
テーパー:CAT-40
大きさ:LXWXH 121” x 91” x 101”
重量:13,228 lbs
管理:CNC (Mitsubishi M720 CNC Control)

AXIS TRAVEL
X-Travel 39.37” 1,000mm
Y-Travel 23. 62” 600mm
Z-Travel 22. 12” 562mm
Spindle Nose to Table Surface 5.1”– 27.56” 130 – 700mm
Spindle Center to Z-axis covers 20.35” 517mm (throat dimension)

TABLE
Table Size (LxW) 43.3” x 19.68” 1,100mm X 500mm
T-slots - 5 total 0.709” slot width 18 mm X 100mm
Max. Table Load (evenly distributed) 1,541 lbs 700kgs

SPINDLE
Spindle Motor – 15,000 rpm 1:1 ratio 30 HP Peak (25kw) 20-HP (10-minute duty rating)
Spindle Speed – Inline Direct-Drive 12,000rpm (opt 24,000rpm Integral Spindle)
Spindle Torque 115 ft-lb @ 1,500 rpm 70 Nm @ 30-min. duty rating
Tool Type CAT #40 Taper (BT #40 optional)
Spindle Taper Material / Hardness SCM415 / HRC58-62
Retention System / Holding Capability Bellville Spring Stack 1650-1760 lbs
Spindle Orientation By sensor
Spindle Runout 0.000040 T.I.R.
Spindle Bearing Front 110mm NSK 70BNR 10 x 2, P4 class-7 bearings
Spindle Bearing Rear 110mm NSK 70BNR 10 x 2, P4 class-7 bearings

AXIS FEEDS
Rapid Traverse X and Y 1,417 ipm 36m / minute
Rapid Traverse Z 945 ipm 24m / minute
Cutting Feedrate 0.04 - 810 ipm
Axis Drive Motor Power – X, Y 4-HP (3kw nominal) Mitsubishi HF303S-A48
Axis Drive Motor Power – X, Y 5-HP (3.5kw nominal) Mitsubishi HF354BS-A48 w/brake
Ballscrews – X, Y, Z 40mm ballscrews with 12mm pitch
Maximum Thrust Force 4408 lbs 2,000 kg
Constant Thrust Force 2204 lbs 1000kg
Linear Positioning Accuracy (Renishaw) 0.0002”/12” 0.005/300 mm
Linear Positioning Repeatability (Renishaw) 0.0001” 0.0025 mm

TOOL CHANGER
Tool Capacity – 24+1 or 30+1 24 or 30-Tool Twin-Arm (40-tool changer optional)
Tool Shank CAT#40 Taper (BT#40 optional)
Tool Change Time (average) 1.7-seconds tool-to-tool, 2.1-seconds chip-to-chip
Maximum Tool Diameter / w/adjacent tool 5.90” / 3.15” 150mm / 80mm
Maximum Tool Length 11.81” 300mm
Maximum Tool Weight 15 lbs. 7kg
Tool Selection / Tool Access Random access / Bi-directional

SPECIFICATIONS
Air Service Requirements 85 psi @ 5-scfm 7 Kg/cm2
Coolant Capacity 100 gallons 367 liters
Connected load electrical requirement 35kva, 75-amps 208-220vac, 60-Hz
Floor space requirements recommended 115” x 99” x 111” 290x250x280cm
Shipping dimensions (L x W x H) 121” x 91” x 101” 306x231x256cm
Machine Weight 13,228 pounds 6,000 kg
Warranty – 1-year machine warranty 3-year Mitsubishi control, motor & drives warranty

詳細

High Speed CNC Machining Center, VMC with Rugged Cross Linear Ways. Ganesh VFM - 4024 4th & 5th Axis Ready 12,000 RPM standard. Rugged Cross Linear Ways, 1,417 Inch Per Minute Rapids.
Features:
4th and 5th Axis Wiring Standard
1,417 inch per minute rapids
12,000 RPM Direct Drive Spindle Standard
Powerful Fanuc or Mitsubishi CNC Controls
Rugged Cross-Linear Ways
Double Anchored Pre-Tensioned Ball Screws
MPG Handwheel Standard
1.7 Seconds High Speed Arm Type ATC
Rugged Meehanite Casting
1,000 PSI Thru-The Spindle Coolant Ready

このモデルの詳細

の詳細について表示するには、 GANESH VFM-4024レビュー、ブランド情報、写真、ビデオ、および多くを含むが、 ここをクリック