GLEASON 775ギアー ホバー

ID:2527
ブランド:GLEASON
モデル:775
タイプ:ギアー ホバー
年:1985
売り主:販売者が誰であるかを見せて...
場所:Michigan
アメリカ合衆国
在庫No.:70
価格:

スペック

Lower:52
最大径 ギアー:152.4 mm
最大 デイアメトラル ピッチ:4
Upper:72
水平/垂直:Vert

ONE (1) USED GLEASON MODEL #775 G-TECH GEAR HOBBER (1985)
SPECIFICATIONS:
Nominal Workpiece Diameter (At 6 DP W/ 5" Diameter
Hob) .............................................. 6"
Maximum Workpiece Diameter (Subject To Pitch, Material
And Hob Diameter) ................................. 8"
Maximum Diametral Pitch (Coarsest) ................... 4
Maximum Helix Angle .................................. 60 Degrees
Minimum Number Of Teeth .............................. 6
Maximum Number Of Teeth (Differential Machine) ....... 120
Maximum Number Of Teeth (Non-Differential Machine) ... 100
Center Distance From Hob Spindle To Work Spindle:
Minimum ........................................... 1.0"
Maximum ........................................... 7.50"
Height, Work Spindle Table To Center Of Hob Spindle:
Minimum ........................................... 6.00"
Maximum ........................................... 14.50"
Distance Between Worktable And Tailstock:
Minimum ........................................... 14.00"
Maximum ........................................... 24.00"
Work Table Diameter .................................. 6.00"
Work Spindle Diameter ................................ Gleason #39 Taper
Bolt Circle Diameter On Work Spindle ................. 4.56"
Maximum Hob Diameter ................................. 5.00"
Maximum Hob Length ................................... 8.50"
Hob Arbor Diameter ................................... 1.25", 1.50", 2"
Hob Speed Range ...................................... 100 - 680 RPM
Maximum Radial Infeed Travel ......................... .500"
Rapid Traverse Rate, Axial Slide ..................... 50"/Minute
Coolant Capacity, Gallons ............................ 65
Hydraulic Capacity, Gallons .......................... 30
Lube Capacity, Gallons ............................... 55
Height, Floor To Worktable ........................... 37.0"
Height ............................................... 90"
Floor Space (WxL) With Machine Mounted Electrical
Box ............................................... 86" x 100"
Net Weight, Approximate .............................. 19,300#

EQUIPPED WITH:
Power Infeed Attachment To Do Worm Gears & Hi-Helix Cam Shaft Gears
Power Tailstock
Hi-Helix Head
Auto Loader (16-Position Control)
Hydraulic Clamping
Modicon PLC Control
220/440/3/60 AC Motor 110 Volt Controls

詳細

CAM-SHAFT, AUTLOAD, INFEED, LIGHT USE

このモデルの詳細

の詳細について表示するには、 GLEASON 775レビュー、ブランド情報、写真、ビデオ、および多くを含むが、 ここをクリック