GLEASON 516ギアー ラッパー

ID:288212
ブランド:GLEASON
モデル:516
タイプ:ギアー ラッパー
売り主:販売者が誰であるかを見せて...
場所:Illinois
アメリカ合衆国
在庫No.:gh516x
価格:

スペック

Lower:28
マックスギア径。:609.6 mm
Upper:48
重量:11,200 lbs

Gleason Model No. 516 Hypoid Spiral Bevel Gear Lapping Machine

EQUIPPED WITH:
Suitable for lapping of automotive and truck spiral bevel and hypoid gears and pinions operating at a 90-degree shaft angle with gear diameters up to 24" (609mm).

Eddy current brake. Hydraulic power supply unit w/accumulator. Hydraulic chucking unit both head s(less draw-in bars. Power movement of drive head in and out. Automatic preset backlash. Drive head spindle bore 3-39/32" dia. x 39/64" taper. Brake head spindle bore 2-19/64" dia. x .5" taper. Special lapping guards for 24" diameter SPC (swing-pinion-cone) feature, 3-way oscillation
for pinion head. Full complement of electrics (motors/controls) for 50/60 cycle.

SPECIFICATIONS:
Maximum gear diameter 24" (609mm)
Maximum pinion diameter 12" (304mm)
Offset of gear spindle above or below center
of pinion spindle (max) 6" (152mm)
PINION SPINDLE
Diam of taper hole at large end 3-29/32" (99.2mm)
Taper per foot 39/64" (15.478mm)
Depth of taper 3" (73.5mm)
Diameter of hole through spindle 3.740" (94.996mm)
GEAR SPINDLE
Diam of taper hole at large end 2-19/64" (58.34mm)
Taper per foot ½" (12.7mm)
Depth of taper 3" (73.5mm)
Diameter of hole through spindle 2.167" (55.04mm)
Electrical Equipment 60 CYCLE 50 CYCLE
Main Motor, 5 HP 1800 RPM 1500 RPM
Hydraulic Motor, ¾ HP 1800 RPM 1500 RPM
Lapping Compound Pump Motor,1 HP 1200 RPM 1000 RPM
Oscillating Drive Motor, ¼ HP 0-1725 RPM
Floor Space 85"x82" 216cmx208cm
Height 82" 208cm
Net Weight (Approx) 11,200 lbs 5,080 kg

詳細

Suitable for lapping of automotive and truck spiral bevel and hypoid gears and pinions

このモデルの詳細

の詳細について表示するには、 GLEASON 516レビュー、ブランド情報、写真、ビデオ、および多くを含むが、 ここをクリック