TOSHIBA MACHINE TMD-16垂直タレット旋盤(VTL)

ID:300417
ブランド:TOSHIBA MACHINE
モデル:TMD-16
タイプ:垂直タレット旋盤(VTL)
年:1995
コントロール:CNC (Fanuc 15TA)
売り主:販売者が誰であるかを見せて...
場所:Michigan
アメリカ合衆国
価格:

スペック

Lower:40
テーブル 径:1,600 mm
スイング:1,999 mm
作業 Ht-U/R:1,349 mm
パワー:44.7 kW
Upper:60
回転数:280 rpm
大きさ:24' X 24'
重量:73,000 lbs
管理:CNC (Fanuc 15TA)

NASH TOOL & MACHINE SUPPLY, INC.
22701 Nagel
Warren (Detroit suburb), Michigan 48089
586-759-1250
e-mail—nashmachinery@yahoo.com
www.nashmachinery.com

TOSHIBA TMD-16 CNC VERTICAL TURNING CENTER
SERIAL NUMBER 420089; BUILT 1995

MACHINE FEATURES AUTOMATIC TWO PALLET CHANGER (APC), FULL "C" AXIS WITH LIVE MILLING SPINDLE, 24 ATC, TWO 63" DIAMETER CHUCKS, AND FANUC 15TA CONTROL

Table diameter--63"
Maximum swing--78.8"
Maximum height top of table to bottom of ram--53"
Maximum cutting height--45.3"
Maximum cutting diameter--78.7"
Maximum load on table--11,000 lbs.
Travels--
horizontal travel of rail head; -31.7", +44.1"
vertical travel of ram; 31.7"
vertical travel of cross rail; 19.7"
Table speeds (2 ranges)--1.6 to 280 rpm
Maximum table torque--15,900 ft-lbf
Milling spindle speeds--12.5 to 1,500 rpm
Feedrates--
X-axis 472 ipm rapid/0.1 to 78.7 feed
Z-axis 315 ipm rapid/0.1 to 78.7 feed
C-axis 800 degrees per minute rapid/11.8 degrees per minute feed
Automatic tool changer capacity (ATC)--24; 8 for turning/16 for milling
Taper in ram--no. 50
Section of ram--8.66" x 8.66"
Table drive motor--60/50 HP
Milling spindle drive motor--20/14.7 HP
Power requirement--200/220 volts; 100 kVA
Equipped with;
automatic two pallet changer (APC)
24 tool capacity automatic tool changer (ATC)
turning and milling tool holders
chuck top jaws
(2) 63" diameter chucks
coolant tank and pump
chip conveyor
ATC tool hoist
tool measurement presetter
Fanuc 15 TA CNC control

Condition--good; inspect under power
Weight--72,200 pounds
Floor space--313" x 288" x 220" high (rail and ram in uppermost position)

詳細

1995 TOSHIBA HIGH QUALITY CNC VERTICAL TURNING CENTER WITH 63" CHUCKS, TWO PALLET AUTO CHANGER, LIVE MILLING SPINDLE, FULL 'C' AXIS, AND 24 ATC. UNDER POWER IN OUR WAREHOUSE

このモデルの詳細

の詳細について表示するには、 TOSHIBA MACHINE TMD-16レビュー、ブランド情報、写真、ビデオ、および多くを含むが、 ここをクリック