見る
  • Fellows 20-4 four axis CNC Shaper
見る

歯車形削り盤FELLOWS 20-4

Connecticut, アメリカ合衆国

概要

ブランド
モデル
ID
313225
条件
使用 - 優れました
1982
場所
Connecticut
アメリカ合衆国
帰りの方針
30日
在庫No.
20-4x4
詳細
This Fellows 20-4 was completly remanufactured in 2014. The machine is equiped with a brand new Fanuc CNC controller. The machine can cut 20” max pitch dia (internal and external) with a 4” face width and max 4DP for spur gears. With the CNC control the machine does not need change gears simplifing the setup.
スペック
メトリックに仕様を変換します
最大径 ギアー20"
大きさL 8' x W 78" x H 9'
重量18,000lbs
管理CNC (Fanuc 18iMB)

スペックシート

FELLOWS 20-4 FOUR AXIS CNC (FANUC) SHAPER This is a 100% remanufactured 20-4. Both upper and lower worms and wheels will be inspected, replaced if necessary and adjusted for proper back-lash and bearing pattern. Cutter spindle bushing will be refit to factory specifications. All bearings, seals and belts will be replaced with new components that meet or exceed factory specifications. Relay electronics will be upgraded to a state of the art Fanuc four axis controller with color display. The hydraulic infeed system will be replaced with a ball screw and AC servo motor. The hydraulic and lube system will be combined into a single compact unit integral with the machine. Work table ways will be re-ground and the table hand scraped for proper bearing patterns All parts will be inspected and replaced when necessary Machine will be striped, cleaned, body filled and painted This FELLOWS 20-4 will be capable of performing with in the original manufactures precision parameters when the machine was delivered new. PRINCIPLE SPECIFICATIONS Maximum Pitch Diameter (External)……..……………………….………. 20” Maximum Pitch Diameter (Internal)……..………….…………………….. 20” Maximum Face Width, External & Internal……………………….………. 4” Maximum Diametral Pitch, Spur …..……………………………………… 4DP Maximum Diametral Pitch, Helical……..…………………………………. 5DP Bore Through Work Spindle…………………………… …………………. 9.055” Cutter Spindle Diameter………...…………..…………………………...… 3.543” Maximum Helix Angle With Special Guides……………………………… 45 deg Distance Between Work Table and Cutter Spindle……………………. 12.5” Maximum OD of Fixture…………………………………………………... 30” Dimensions Length……………………………………………………………… 8’ Height………………………………...………….……………….... 9’ Width…………………………………………..………………….. 78” Machine net weight, approx…………………………………….……..…… 18,000 lbs. STANDARD EQUIPMENT: Standard straight spur guide 15 Hp AC main drive stroking motor. Stroking speed from 50-400. Other SPM available upon request Programmable 15Hp AC variable drive to control stroking speed. The CNC will control the following axis: Work table rotation (no change gears required) Cutter spindle rotation Work table infeed Cutter spindle stroking speed Centralized auto lube Machine comes as a complete unit and requires minimal setup (power, oil and coolant). Coolant sump in base Removable chip basket Crowning feature via back off cam Fully air-condition electrical cabinet Cutter elevation PROGRAMED FEATURES: CNC controller has Macro screens for “Operator friendly” question and answer setups. NO PROGRAMING NEEDED. One to four cut selected by CNC controller Each cut has individual parameters for: Depth of cut Infeed rate Stroking speed Rotational feed rate Degree of work rotation Setups can be stored in nonvolatile memory using a setup number between 1-999 Recut mode allows the operator to bring the part into size without changing the programmed parameters. Optional hydraulic clamping and tail stock can be automatic or manually controlled OPTIONAL EQUIPMENT True cutter elevating 2” travel Hydraulic work clamping Tailstock (standard or swing away) Stroke length extended to 5" or 6” Full Safety Enclosure 7” Riser increasing the distance between the cutter spindle and the table to 16” 11” Riser increasing the distance between the cutter spindle and the table to 20.5” 21” Riser increasing the distance between the cutter spindle and the table to 30.5” Other Risers to order WARRANTY: Comes with a standard one year warranty on parts and labor. Machine to be supplied with unconditional 30-day money back, return privilege warranty. Warranty is not transferable. Second year warranty can be purchased.
売り手について

このモデルの詳細

詳細情報を表示するにはFELLOWS 20-4ブランド情報、写真、ビデオ、および多くを含むが、 ここをクリック

このモデルのより多くのリストを参照してください。

thumb

ALLSTEEL 20-4

プレスブレーキ

中古品 - 良いです | Minnesota, アメリカ合衆国
$9,500.00 USD

FELLOWS 20-4

歯車形削り盤

使用 - 優れました | 1982 | North Carolina, アメリカ合衆国
thumb

FELLOWS 20-4

歯車形削り盤

使用 - 優れました | North Carolina, アメリカ合衆国
thumb

FELLOWS 20-4

歯車形削り盤

中古品 - 良いです | 1974 | アメリカ合衆国

このタイプのリストを参照してください

FELLOWS FS-180

歯車形削り盤

中古品 - 良いです | 1993 | アメリカ合衆国
thumb

STANKO 5M150 NC

歯車形削り盤

大韓民国
thumb

STANKO IS - S 1000

歯車形削り盤

大韓民国
thumb

TOKYO KIKAI TF-64

歯車形削り盤

台湾
すべてを表示

このブランドのためのより多くのリストを参照してください

FELLOWS FS-180

歯車形削り盤

中古品 - 良いです | 1993 | アメリカ合衆国
thumb

FELLOWS

ギアー 付属品

Michigan, アメリカ合衆国
thumb

FELLOWS 4B STEERING SECTOR

歯車形削り盤

1976 | Connecticut, アメリカ合衆国
thumb

FELLOWS 615A

歯車形削り盤

中古品 - 良いです | 1941 | アメリカ合衆国
すべてを表示