MANFORD SP-500VS垂直ミルズ

ID:3361
ブランド:MANFORD
モデル:SP-500VS
タイプ:垂直ミルズ
条件:新しい在庫がある
売り主:販売者が誰であるかを見せて...
場所:California
アメリカ合衆国
価格:
$10,800.00 USD

スペック

Lower:33
表A-W:10 "
表A-L:54 "
トラベル-長さ方向:34 "
トラベル-クロス:16 "
パワー:3 hp
Upper:53
回転数:4500 rpm
テーパー:R8
大きさ:94"x84"x70"
重量:3360

Specification:
Table:10” x 54”
T-Slot No.x Size:3” x 5/8” (3 x 15.875mm)
Longitudinal travel (W/O power feed ):34”
(With power feed ):31”
Cross travel:16” (410mm)
Travel of knee:17” (450mm)
Ram travel:22” (562mm)
Quill travel:5” (127mm)
Table to spindle nose (D):4” — 20” (112-510mm)
Over swivel on turret:360º
Head Swivel ( R & L ):90º
Head tilt ( UP & DOWN ):45º
Spindle to column (F):6.6”-28.7” (168-730mm)
Spindle motor:3HP
Spindle taper:R8 (or NST#30 )
Quill feed:0.0015” - 0.003” - 0.006”
Spindle Speed (r.p.m.):( 60Hz) 60-4500, ( 50Hz ) 50-3800
Overall height (A):90” (2262mm)
Overall depth (B):83.5” (2120mm)
Overall width (C):70” (1790mm)
Net Weight:3360 lbs. (1500 Kgs)

詳細

Best mill from Taiwan, Super Precision model, 2 years complete warranty
MODEL: SP-500VS $10,800.00
10 X 54” Table , long saddle & box way on Y
Hardened & Ground Table with Ground T-Slot
3HP Spindle Motor, variable speed
R8 (NST#30) Spindle Material Scm415(SAE4115)Hardened & Ground.
Bearing support to the motor shaft
Unique rigid design on spindle auto-feed, spline design on the pinion & clutch support
Trucite-B On X&Y Ways,Slideways and Gibs.
Hardened & Ground X&Y Slideways.
Electroless Nickel-Phosphorus Process On X&Y leadscrew with hardness 35 HRC.
Leadscrew nut made from PBC2, phosphor bronze
Highly Improved Vari-Speed Head.
Rubber chip cover (front & rear )
1-1/2”(38mm) Diameter Lifting Screw.
Leveling Screw & Plate On Base.
Tool box & Tool
Rubber chip cover ( front & rear )

このモデルの詳細

の詳細について表示するには、 MANFORD SP-500VSレビュー、ブランド情報、写真、ビデオ、および多くを含むが、 ここをクリック