GLEASON 116かさ歯車ジェネレータ

ID:344986
ブランド:GLEASON
モデル:116
タイプ:かさ歯車ジェネレータ
年:1997
売り主:販売者が誰であるかを見せて...
場所:Michigan
アメリカ合衆国
在庫No.:10620
価格:

スペック

Lower:94
最大径 ギアー:18 "
タイプ:Rougher/Finisher
大きさ:126" x 102" x 84"
Upper:114
重量:24,000 lbs
管理:CNC (Fanuc 18T)

EQUIPPED WITH:
Fanuc 18T
Enclosed Guarding
Hydraulic Clamping
6 Axis DRO
Coolant System
Stock Divide
Magnetic Chip Separator

SPECIFICATIONS:

WORKPIECE CAPACITY:
Automotive Version (Jobbing Version)
Y Extreme Ratio: 4:1 (10:1)
Y Cone Distance: Max (30 Deg. Spiral Angle & 12" Dia. Cutter: 7.40 (9.00")
Full Depth, Maximum: 1.00"
Face Width, Maximum: 2.30" (2.750")
Range of Tooth Numbers: 5 to 150 Inclusive
Maximum Gear Pitch Dia. of: (18.00")
Typical 30 Deg. Spiral Ang.: 14.00"
Gear Using 12" Dia. Cutter: 14.00" (16.00")
At The Following Ratios: 10.50" (12.75")
Diametral Pitch (Coarsest): 2.00"

MACHINE SPECIFICATIONS:
Machine Center to Nose Of Spindle: 2.50" to 13.50"
Root Angle: -12 Deg. to 66 Deg. (-12 Deg. to 90 Deg.)
Sliding Base: Withdraw 2",Advance 3"
Vertical Offset: 4.50" Up and Down
Cutter Spindle Rotation Angle (Tilt): 0 Deg. to 180 Deg.
Swivel Angle: 0 Deg. to 355 Deg.
Eccentric Angle: 0 Deg. to 160 Deg.
Cradle Angle: Deg. to 180 Deg.

AXIS SPEEDS - MAXIMUM:
Y Cutter Spindle: 115 RPM

WORKSPINDLE DIMENSIONS:
Diameter of Tapered Hole at Large End: 3 29/32"
Taper Per Foot: 39/64"
Depth of Taper: 6"
Diameter of Hole Through Spindle: 3 1/16"
Diameter of Spindle Nose: 5 1/2"
Length x Width x Height: 126" x 102" x 84" (Width can be adjusted to 90")
Weight: 24,000 lbs

詳細

Immediately Available, 18" Maximum Gear Pitch Diameter, 2.3" Maximum Face, Equipped with Fanuc 18T Control, Enclosed Guarding, Hydraulic Clamping, 6 Axis Digital Read Out, Coolant System, Stock Divider, Magnetic Chip Seperator

このモデルの詳細

の詳細について表示するには、 GLEASON 116レビュー、ブランド情報、写真、ビデオ、および多くを含むが、 ここをクリック