SHIZUOKA SV-4024立型マシニングセンタ

ID:346110
ブランド:SHIZUOKA
モデル:SV-4024
タイプ:立型マシニングセンタ
条件:使用 - 優れました
年:2000
場所:Wisconsin
アメリカ合衆国
在庫No.:12,000 RPM
価格:

スペック

Lower:16
X:40 "
Y:24 "
Z:20 "
パワー:20 hp
回転数:12000 rpm
#ATC:24
表A-W:24 "
Upper:36
表A-L:48 "
テーパー:CAT-40
#Axis:3
大きさ:145x102x110
重量:17000
管理:CNC (FANUC 18iM)

DATE OF MANUFACTURE 2000
TABLE SIZE 47" x 27.6"
MAXIMUM PALLET LOAD 2,205 LBS
SPINDLE NOSE TO PALLET TOP 5.9" - 26"
X AXIS TRAVEL 40.2"
Y AXIS TRAVEL 24"
Z AXIS TRAVEL 20.1"
RAPID TRAVERSE RATE X & Y AXIS 1575 IPM
CUTTING FEED RATE 0.4 - 630 IPM
SPINDLE TAPER CAT 40
SPINDLE SPEEDS 100 - 12,000 RPM
SPINDLE MOTOR 30 HP
TOOL CHANGER CAPACITY, SIDE MOUNT 24 (SWING-ARM CAM)
SLIDING DOOR OPEN WIDTH 50"
MAXIMUM TOOL WEIGHT 17.6 LBS
WEIGHT, APPROX. 17,000 LBS
DIMENSIONS, APPROX. 100"L x 103"W x 117"H

Equipped With:
FANUC 18i-M CNC CONTROL w/9" MONITOR,
RS-232C PORT INTERFACE FOR DNC OPERATION,
RIGID TAPPING (SYNCHRONOUS TAPPING / SOLID TAPPING),
CHIP BLASTER COOL-THRU-SPINDLE UNIT (2000 PSI),
(2) TURBO REAR DISCHARGE CHIP CONVEYORS,
KAMUI SPINDLE & OIL CHILLER,
REMOTE PULSE GENERATOR HAND-WHEEL,
SIDE MOUNTED AUTO-TOOL CHANGER (SWING-ARM CAM),
COOLANT SYSTEM WITH TANK & PUMP,
FULLY ENCLOSED GUARDING, ALL AVAILABLE MANUALS
****RIGID BOX WAY CONSTRUCTION****
*******30 HP HIGH-SPEED SPINDLE*******
***********A QUALITY JAPANESE MACHINE TOOL************
See More at www.mwmachinery.com

詳細

SHIZUOKA SV-4024 CNC MILL, FANUC 18i-M, 40 x 24 x 20, 30 HP, 12000 RPM, COOL THRU SPINDLE, 24 SIDE TOOL CHANGER, BOX WAY

DATE OF MANUFACTURE 2000
TABLE SIZE 47" x 27.6"
MAXIMUM PALLET LOAD 2,205 LBS
SPINDLE NOSE TO PALLET TOP 5.9" - 26"
X AXIS TRAVEL 40.2"
Y AXIS TRAVEL 24"
Z AXIS TRAVEL 20.1"
RAPID TRAVERSE RATE X & Y AXIS 1575 IPM
CUTTING FEED RATE 0.4 - 630 IPM
SPINDLE TAPER CAT 40
SPINDLE SPEEDS 100 - 12,000 RPM
SPINDLE MOTOR 30 HP
TOOL CHANGER CAPACITY, SIDE MOUNT 24 (SWING-ARM CAM)
SLIDING DOOR OPEN WIDTH 50"
MAXIMUM TOOL WEIGHT 17.6 LBS
WEIGHT, APPROX. 17,000 LBS
DIMENSIONS, APPROX. 100"L x 103"W x 117"H

Equipped With:
FANUC 18i-M CNC CONTROL w/9" MONITOR,
RS-232C PORT INTERFACE FOR DNC OPERATION,
RIGID TAPPING (SYNCHRONOUS TAPPING / SOLID TAPPING),
CHIP BLASTER COOL-THRU-SPINDLE UNIT (2000 PSI),
(2) TURBO REAR DISCHARGE CHIP CONVEYORS,
KAMUI SPINDLE & OIL CHILLER,
REMOTE PULSE GENERATOR HAND-WHEEL,
SIDE MOUNTED AUTO-TOOL CHANGER (SWING-ARM CAM),
COOLANT SYSTEM WITH TANK & PUMP,
FULLY ENCLOSED GUARDING, ALL AVAILABLE MANUALS
****RIGID BOX WAY CONSTRUCTION****
*******30 HP HIGH-SPEED SPINDLE*******
***********A QUALITY JAPANESE MACHINE TOOL************
See More at www.mwmachinery.com

このモデルの詳細

の詳細について表示するには、 SHIZUOKA SV-4024レビュー、ブランド情報、写真、ビデオ、および多くを含むが、 ここをクリック