SHARP VH25垂直&水平ミルズ

ID:353305
ブランド:SHARP
モデル:VH25
タイプ:垂直&水平ミルズ
条件:新しい在庫がある
年:2012
シリアルNo.:90401651
売り主:販売者が誰であるかを見せて...
場所:California
アメリカ合衆国
在庫No.:1138
価格:

スペック

Lower:33
テーブルサイズ-W:254 mm
Upper:53
テーブルサイズ-L:1,295 mm

Specifications:

Work Table:
Surface Area: 56" x 10"
T-Slot Center Distance: 3 @ 2.5" centers
T-slot (nominal size x no. x pitch): 5/8" x 3"

Travels:
Travel (longitudinal x cross x vertical): 36 x 16.5 x 17.5"
Quill Travel: 5"

Vertical Spindle:
Spindle Taper: NMTB / NST #40
Speeds: 60 to 4,500 RPM
Distance from Spindle End Table: 5-1/8 to 23-5/8"
Distance Spindle to Column: 12.8 to 30.7"
Quill Feeds (in/rev): 0.0016, 0.003, 0.006

Horizontal Spindle:
Spindle Taper: NMTB / NST #40

Motors:
Vertical Spindle: 4 HP
Horizontal Spindle: 5 HP

Head Adjustments:
Swivel Angle of Head (left and right): 90º
Head Swivel: 360º

General:
Electrical: 220 / 440 Volt, Three Phase
Floor Area: 82" x 75"
Overall Height: 93"

Features:
Separate motors for the vertical and horizontal spindles.
Infinitely Variable Spindle Speeds.
4 ~ 5 HP variable speed drive vertical spindle with #40 taper.
The vertical spindle is equipped with electro-magnetic brake for instant, fast action stop of the quill; it is also equipped with electro-magnetic lock for quick and simple change of tool holder. Power draw bar is available as an option.
The vertical head has a joystick that control forward and reverse of the spindle, a handy feature for most tapping operations. A separate lever controls spindle up and down feed.
The saddle is built with 2 oversized box ways, hardened and ground, to ensure the stability of the table under heavy milling conditions.
A single powerful motor drives the feed and rapid traverse of the table, saddle and knee. Powerful knee feeds allow deep boring and drilling of large work piece. It also allows simultaneous multi-axes feeds.
The table is equipped with slip clutch as overload protection, a superior design than shear pins.
The horizontal spindle speed goes as low as 35 rpm for heavy duty milling jobs.
Changeover from vertical to horizontal operation is quick and easy.
The machine is equipped with Climb Milling Compensator for smooth and stable horizontal climb milling operations.
The adjustable automatic lube system maintains proper lubrication at desired intervals to the saddle, the table, the knee and the column.
Manual movement of the table is controlled by hand wheel installed at the front of the table for easy operation.
Gears, shafts and pins are made out of Chrom-Moly material, hardened and ground for precision and durability. They are lubricated constantly via a pressurized lube system.
Ways are fully gibbed to ensure smooth sliding motions.
Newall DP700 Digital Read-Out System & all standard accessories.

Comes as shown in pictures.

詳細

“This Machine is a NEW never been used Floor Model with Limited Warranty.”

GUARANTEE: If any machine guaranteed by us does not prove satisfactory mechanically, the Purchaser may return it freight prepaid within 14 days from date of shipment and we will refund the purchase price in full. This does not apply to machine sold “as is” or “subject to inspection”. This guarantee applies only to machines which we own. The machine must be returned in the same condition that it left our warehouse. MachineStation shall not be responsible for any damage done by truckers, riggers, or other parties. Machine damaged in shipping are not covered under the return privilege.

WARRANTY: Seller makes no warranties of any kind whatever, expressed, or implied. All specifications and descriptions of said goods are approximate, not binding and meant only as a guide. It is the Buyer’s responsibility to inspect the goods and ascertain if the specifications, description and condition of the goods confirm to the Buyer’s requirement.

MACHINE USE AND SAFETY: Buyer acknowledges that the goods described herein are pre-owned used goods which were neither designed or manufactured by the Seller, nor has the Seller knowledge of, or control over, the prior use or misuse of said goods: nor does the Seller have knowledge or control over the application of these goods by the Buyer. It is the Buyer’s (user’s), responsibility to provide proper safety devices, equipment and instructions for any particular use, and to take all necessary steps to confirm to all Federal, State or Local Government Safety Standards and including OSHA.

BUYER IS RESPONSIBLE FOR SCHEDULING TRANSPORTATION OF THIS MACHINE, AS WELL AS ALL COST TO MOVE IT. IF YOU NEED HELP WITH SCHEDULING, PLEASE CONTACT US AND WE WILL ASSIST YOU. WE SHIP GLOBALLY.

このモデルの詳細

の詳細について表示するには、 SHARP VH25レビュー、ブランド情報、写真、ビデオ、および多くを含むが、 ここをクリック