AMADA CTB400垂直バンドソー

ID:354310
ブランド:AMADA
モデル:CTB400
タイプ:垂直バンドソー
条件:中古品 - 良いです
売り主:販売者が誰であるかを見せて...
場所:Illinois
アメリカ合衆国
帰りの方針:30日
在庫No.:17859
価格:

スペック

Lower:34
パワー:10 hp
ブレード 幅:1.5 "
ブレード 長さ:186 "
Upper:54
FPM:492
大きさ:89"L x 89"W x 91"H
重量:7,800 Lbs.

16.9" AMADA CTB400 CNC VERTICAL CARBIDE BAND SAW
S/N 40850029, MFG 1998, RACO Stk #17859
CUTTING CAPACITY ROUND 30 TO 430 MM - 1.18" TO 16.9", RECTANGULAR16.9" X 16.9"
WORK LOAD CAPACITY 5,500 LBS., SAW BLADE 1-1/2" X .055 X 15'6", BLADE SPEED 50 TO 492 FPM,, BLADE MOTOR 10 HP 220/3/60

THE WORLD'S FIRST CNC OPTIMAL CUTTING CONTROL PRESETS FEEDS AND SPEEDS
ACCORDING TO MATERIAL SPECIFICATION. THIS UNIT HAS 229 FACTORY
INSTALLED MATERIAL SPECS, WITH 100 AVAILABLE FOR CUSTOM MATERIALS.
FEEDS AND SPEEDS ARE AUTOMATICALLY SET TO ACHIEVE THE MOST ECONOMICAL
CUTTING WITH THE HIGHEST PRODUCTIVITY POSSIBLE, WHILE MAINTAINING NOISE
LEVELS BELOW 85 DECIBELS. AMADA CNC CUTTING CONTROL FOR BLADE CONTROL
WITH QUICK APPROACH AND WORK WIDTH SENSOR. BLADE SLIP, BINDING, BREAKAGE
SENSOR. CUTTING CONTROLS INCLUDE CUTTING OIL FLOW RATE, OUT OF SQUARE
CUT DETECTOR, FEED STROKE, FRONT & REAR VISES, WIRE BLADE BRUSH, HYDRAULIC, BLADE TENSIONER, CHIP CONVEYOR, FULL ENCLOSURE.

詳細

16.9" AMADA CTB400 CNC VERTICAL CARBIDE BAND SAW
S/N 40850029, MFG 1998, RACO Stk #17859

CUTTING CAPACITY --- ( ROUND ) ------------ 30 TO 430 MM - 1.18" TO 16.9"
CUTTING CAPACITY --- (RECTANGULAR ) ------- 16.9" X 16.9"
WORK LOAD CAPACITY ------------------------ 5,500 LBS.
SAW BLADE --------------------------------- 1-1/2" X .055 X 15'6"
SAW BLADE SPEED --------------------------- 50 TO 492 FPM
WORK FEED STROKE --- ( FRONT VISE ) ------- 11.8"
WORK FEED STROKE --- ( REAR VISE ) -------- 15.7"
FEED LENGTH ------------------------------- .0394" TO 393.69"
NUMBER OF CUT-OFF PIECES ------------------ 1 TO 999
REMNANT LENGTH ---------------------------- .059"
TABLE HEIGHT ------------------------------ 39.4"
SAW BLADE MOTOR --------------------------- 10 HP 220/3/60
EQUIPPED WITH ---

THE WORLD'S FIRST CNC OPTIMAL CUTTING CONTROL PRESETS FEEDS AND SPEEDS
ACCORDING TO MATERIAL SPECIFICATION. THIS UNIT HAS 229 FACTORY
INSTALLED MATERIAL SPECS, WITH 100 AVAILABLE FOR CUSTOM MATERIALS.
FEEDS AND SPEEDS ARE AUTOMATICALLY SET TO ACHIEVE THE MOST ECONOMICAL
CUTTING WITH THE HIGHEST PRODUCTIVITY POSSIBLE, WHILE MAINTAINING NOISE
LEVELS BELOW 85 DECIBELS. AMADA CNC CUTTING CONTROL FOR BLADE CONTROL
WITH QUICK APPROACH AND WORK WIDTH SENSOR. BLADE SLIP, BINDING, BREAKAGE
SENSOR. CUTTING CONTROLS INCLUDE CUTTING OIL FLOW RATE, OUT OF SQUARE
CUT DETECTOR, FEED STROKE, FRONT & REAR VISES, WIRE BLADE BRUSH, HYDRAULIC
BLADE TENSIONER, CHIP CONVEYOR, FULL ENCLOSURE.

このモデルの詳細

の詳細について表示するには、 AMADA CTB400レビュー、ブランド情報、写真、ビデオ、および多くを含むが、 ここをクリック