水平テーブルタイプボーリングミルズKURAKI KBT13-DXA
Niedersachsen, ドイツ概要
ブランド
モデル
ID
356956
条件
中古品 - 良いです
年
1990
シリアルNo.
1469
場所
Niedersachsen
ドイツ
ドイツ
在庫No.
V(B)-5813
The twin pallet Kuraki KBT-13DX AP is a rarity.
One of the finest quality boring mills available today, the machine was used in the production of tractor and agricultural machinery parts.
It was very well kept, regularly maintained and service and repairs were carried out without delay.
The machine has now been dismantled and is ready for immediate shipment.
Photos and videos are available upon request.
メトリックに仕様を変換します
スピンドル サイズ | 5.1181" |
表のX HORIZ TVL | 129.92" |
ヘッドのYヴェールTVL | 70.866" |
パワー | 29.5 hp |
回転数 | 2,500 RPM |
表A-W | 62.992" |
表A-L | 70.866" |
スピンドルTVL。 | 27.559" |
大きさ | 7000 x 9500 x 4750 mm |
重量 | 53 t |
管理 | CNC (Fanuc 15-M) |
スペックシート
Proposal Number V(B)-5813
CNC Horizontal Table Type Boring Mill with Pallet Changer
Kuraki KBT-13DX NP
Year 1990
Control Fanuc 15M
Boring spindle diameter 130 mm
Automatic pallet changer APC 2 pallets
Pallet size 1600 x 1800 mm
Pallet load max. 6000 kg
Table load (not using the APC) max. 10000 kg
Spindle – table surface min/max. 0 / 1800 mm
Spindle nose – table centre min/max. 700 – 2000 mm
Table indexing B 0.001 degrees
Table cross travel X 3300 mm
Headstock vertical travel Y 1800 mm
Spindle axial travel W 700 mm
Column longitudinal travel Z 1300 mm
Collision circle in work area max. Ø 2400 mm
Cutting feeds X,Y,Z,W 1 – 3600 mm/min.
Cutting feeds B 0.1 – 360 °/min
Rapid traversesX,Y,Z 10000 mm/min.
Rapids B 1 rpm
Thrust in the Z Axis max. 25000 N
Spindle motor rating 22/26 KW
Spindle speed range 5 – 2500 rpm
Number of gear steps 3
Spindle torque max. 2900 Nm
Boring spindle diameter 130 mm
Spindle taper BT 50
Tool magazine positions 90
Tool Ø with/without adjacent tools max. 125 / 230 mm
Tool length max. 400 mm
Tool weight max. 25 kg
Milling capacity in S48C max. 960 cm³/min.
Boring capacity in S48C max. Ø 70 mm
Tapping capacity in S48C max. M72
Machine weight 53000 kg
Machine dimensions l x w 7000 x 9500 mm
Machine height 4750 mm
Condition is very good
このタイプのリストを参照してください
SCHARMANN HEAVYCUT 1Z/TDV3
水平テーブルタイプボーリングミルズ
GIDDINGS & LEWIS G60-T
水平テーブルタイプボーリングミルズ
NOMURA B-100WP
水平テーブルタイプボーリングミルズ
GIDDINGS & LEWIS 70A-DP4-T
水平テーブルタイプボーリングミルズ
このブランドのためのより多くのリストを参照してください
KURAKI CM-601
垂直&水平ミルズ
KURAKI KV-700
立型マシニングセンタ
KURAKI CMN-5B/L‧H
立型マシニングセンタ
KURAKI KBT-1101P
水平テーブルタイプボーリングミルズ