SHARP 1340VSエンジン旋盤

ID:358751
ブランド:SHARP
モデル:1340VS
タイプ:エンジン旋盤
条件:新しい在庫がある
売り主:販売者が誰であるかを見せて...
場所:California
アメリカ合衆国
価格:

スペック

Lower:78
スイング:13 "
センター:40 "
スピンドル ボア:1.563 "
パワー:3 hp
Upper:98
回転数:2000 rpm
スイング オーバー クロス スライド:8.313 "
重量:1,550 lbs

Specifications:

Capacities:
Swing Over Bed: 13"
Swing Over Cross Slide: 8-5/16"
Swing Over Gap: 18-1/2"
Width of Bed: 7-1/2"
Distance Between Centers: 40"

Headstock:
Spindle Nose Type: D1-4 cam lock
Spindle Bore: 1-9/16"
Spindle Speeds: 40 to 2,000 rpm (Vari)
Taper of Spindle Bore: MT #5

Threads and Feeds
Longitudinal Feeds - in/rev (40): 0.0016 - 0.046"
Cross Feed - in/rev (40): 0.0005 - 0.015"
Inch Threads (TPI): 2-56 (39)
Metric Threads (mm): 0.5-12 (42)
Lead Screw (Pitch, Diameter): 8 tpi, 1"

Carriage:
Saddle Width: 12"
Apron Width: 11"
Cross Slide Width: 4-1/2"
Cross Slide Travel: 6-3/4"
Compound Rest Travel: 3-1/2"
Compound Width x Length: 3 x 7-1/2"

Bed:
Bed Length: 64"
Bed Width: 7-1/2"

Tailstock:
Quill Travel (graduated): 4"
Quill Diameter: 1-9/16"
Quill Taper: MT #3

General:
Spindle Motor: 3 Horsepower
Electrical: Single of 3 Phase
Net Weight (approx.): 1,550 lbs

Standard Equipment:
Removable Gap
Steady Rest
Coolant System
Full Length Splash Guard
4 Way Tool Post
Tailstock
Back Plate
Foot Brake
Thread Dial
Center Sleeves
Dead Centers
Tool Kit

Optional Accessories: (Please call for pricing and additional information)
3 Jaw Chuck
4 Jaw Chuck
Chuck Guard
Follow Rest
Taper Attachment
Quick Change Tool Holder
Live Center
Drill Chuck
Face Plate
Micrometer Carriage Stock
5C Collet Closure
2-Axis Digital Readout System
440V Transformer

Features:
Hardened and ground gears in headstock for long lasting wear
Induction hardened and ground bed ways for smooth longitudinal movements
Spindle supported by 2 high precision tapered roller bearings
Carriage equipped with overload clutch to protect gears and screws
Quick change totally enclosed gearbox offers wide range of threads
Oil bath lube system keeps gears and shafts well lubricated
Oversized compound, apron and cross slide offer better cutting stability compared with similar size models available in F and V models
Jog button for easy engagement of gears and inching of spindle rotation
Digital Variable Speed in VS and V models allow easy change of spindle speed by dialing, it also operates on 3 phase or single phase power supply
Gapped bed allowing large work piece to be chucked when needed

詳細

We are an authorized dealer of Sharp. Let us know if you are in the market for a particular machine and/or tooling

Please keep in mind that Sharp is constantly looking for new technology and design to enhance the quality and features of its products. Specifications and features will change over time. Call us to confirm details of a particular machine as well as stock levels before deciding to purchase

PAYMENT: Banker's check or wire transfer are preferred when dealing with transactions that exceed $1000. Any purchase of over $1000 will come with an extra 3% charge when paying through Paypal or with a Credit/Debit Card. All major credit cards are accepted.

WARRANTY: Sharp Industries warrants to the original purchaser, other than a purchaser for resale, (the “Purchaser”) that Sharp Industries machine tools shall be free of defects in materials and workmanship. For a period of one (1) year from completion of installation, Sharp Industries will, at its sole and exclusive discretion, either replace or repair any machine or part thereof defective in workmanship or material, at no charge to the Purchaser.

All warranty repairs must either be performed by Sharp Industries or MachineStation. To obtain warranty service, Purchaser must contact MachineStation. Purchaser must provide verification of the date of delivery/installation when requesting warranty service (dated installation report). Ground freight charges (UPS regular or common carrier truck) for all warranty replacement parts are paid by Sharp Industries. If machine is not operational, Sharp Industries will pay next-day air shipment charges for necessary parts weighing 100 lbs. or less. Materials or parts alleged to be defective shall be returned to Sharp Industries, at Sharp Industries’ request, transportation charges prepaid. After the warranty repair or replacement of a defective part, Sharp Industries’ warranty for such part shall continue for ninety (90) days or for the remainder of the original Limited Warranty, whichever is longer.

MACHINE USE AND SAFETY: Buyer acknowledges that the Seller has no knowledge or control over the application of these goods by the Buyer. It is the Buyer’s (user’s), responsibility to provide proper safety devices, equipment and instructions for any particular use, and to take all necessary steps to confirm to all Federal, State or Local Government Safety Standards and including OSHA.

BUYER IS RESPONSIBLE FOR SCHEDULING TRANSPORTATION OF THIS MACHINE, AS WELL AS ALL COST TO MOVE IT. IF YOU NEED HELP WITH SCHEDULING, PLEASE CONTACT US AND WE WILL ASSIST YOU. WE SHIP GLOBALLY.

このモデルの詳細

の詳細について表示するには、 SHARP 1340VSレビュー、ブランド情報、写真、ビデオ、および多くを含むが、 ここをクリック