GANESH GMV5垂直ミルズ

ID:363250
ブランド:GANESH
モデル:GMV5
タイプ:垂直ミルズ
条件:新しい在庫がある
年:2017
売り主:販売者が誰であるかを見せて...
場所:California
アメリカ合衆国
価格:

スペック

Lower:23
表A-W:304.8 mm
表A-L:1,473 mm
トラベル-長さ方向:965.2 mm
トラベル-クロス:400 mm
Upper:43
パワー:3.7 kW
回転数:3600 rpm
テーパー:40 Taper Spindle
重量:3,850 lbs

TABLE –
Table Size: 12” X 58” (305mm X 1473mm)
Table Travel / (With Power Feed) 36” (914mm) / 32” (812mm)
Table Weight Capacity 1500 lbs
T-slot width (3 Ground T-Slots) 5/8” ground reference edges (15.9mm wide)
MACHINE TRAVELS & CAPACITY –
Table Travel – X Axis / (With Power Feed) 38” (965mm) / 35” (890mm)
Cross Travel – Y Axis 15.75” (400mm)
Knee Travel – Z Axis 16” (406mm)
Ram Travel 17.7” (450mm)
Spindle Nose-to-Table Travel 2” – 18” (50 - 457mm)
Quill Travel – Manual & Power Feed 5” (127mm)
Quill feeds – With Trip Release 0.0015”, 0.003”, 0.006”, (0.038mm, 0.076mm, 0.152mm)
Quill Diameter 4.13” (105mm)
Leadscrews with ground pitch (X & Y) 200” per rev. (5mm) (ballscrews optional)
Adjustable scale ring resolution 0.001” (0.0254mm)
Slide Ways Hardened & Ground
X-Axis – Longitudinal Table Travel Hardened & ground dovetail ways
Y-Axis - Cross Slide to Knee Hardened & ground square box ways
Z-Axis - Knee to Column Hardened & ground square box ways
SPINDLE HEAD –
Head tilt (Left-to-Right) 90 – 0 – 90 degrees
Head tilt (Front-to-Back / Up-Down) 45 – 0 – 45 degrees
Head Swivel 360-degrees
Spindle Motor 5-HP, 3-Phase 208–240 vac
Spindle Taper 40-taper
Spindle Runout 0.0002” maximum runout (0.005mm)
Spindle Bearings Fafnir ABEC-7 matched set of Class-7 bearings
Variable Speed Drive - Dual Range 70 - 460 rpm (low-range) / 460 - 3600 rpm (high-range)
Note: 5,000-RPM Spindle available w/ the optional AC Inverter Spindle Head
DIMENSIONS & WEIGHT –
Power Requirements 3-Phase 220 vac @ 26-amps, (440 vac optional)
Coolant Capacity 13.5-Gallons (51 liters)
Machine Weight 3,850 lbs.

詳細

Ganesh Heavy duty knee type milling machine
GMV-5 - (12”X 58”) Heavy-Duty
Class-7 Super Precision Fafnir Spindle Bearings
5-Horsepower Variable Speed Head
60 – 3,600 RPM Spindle Speeds
Square Box Ways on Knee & Column - Y & Z Axis
Automatic Lubrication of Ways and Leadscrews
1.5-Horsepower Knee Power-Feed Motor
Hard-Chrome Plated Quill
40-Taper Spindle
1-Year machine warranty, parts & labor
The factory installed NEWALL DRO’s feature a 3-year no-fault warranty.

Ganesh “30-day Full-Satisfaction Guarantee” based on normal usage! Note: Satisfaction guarantee does not cover freight, rigging,
installation cost, machine crashes or abuses.
Ask us about our smaller knee mill models or visit www.ganeshmachinery.com

このモデルの詳細

の詳細について表示するには、 GANESH GMV5レビュー、ブランド情報、写真、ビデオ、および多くを含むが、 ここをクリック