TOYODA FH-50横型マシニングセンタ

ID:367030
ブランド:TOYODA
モデル:FH-50
タイプ:横型マシニングセンタ
条件:中古品 - 良いです
年:1987
コントロール:CNC (Fanuc 11M)
売り主:販売者が誰であるかを見せて...
場所:Illinois
アメリカ合衆国
価格:

スペック

Lower:7
X:1,001 mm
Y:800.1 mm
Z:749.3 mm
パワー:14.9 kW
回転数:5000 rpm
#ATC:64
Upper:27
パレット-幅:630 mm
パレット-長さ:630 mm
テーパー:BT50
#Axis:3
重量:27500 Lbs
管理:CNC (Fanuc 11M)

1987 Toyoda FH-60
Horizontal Machining Center w/ 9 Station Pallet Pool

Specifications:
Control .............................................................................................. Fanuc 11M
Pallet Size ............................................................................................... 630 mm
Pallet Height from Floor ............................................................................. 43.3"
X Axis Travel .............................................................................................. 39.4"
Y Axis Travel .............................................................................................. 31.5"
Z Axis Travel ............................................................................................... 29.5
Spindle Nose to Table Top .................................................................. 6.9"-36.4"
Spindle Taper ............................................................................................. CT50
Spindle Motor ............................................................................................ 20HP
Spindle Speed .................................................................................... 5,000 RPM
Rapid Traverse Rates ............................................................................ 494 IPM
Cutting Feed Rates ...................................................................... .04-212.6 IPM
Tool Capacity ......................................................................... 64 Tool Magazine
Machine Weight .................................................................................. 27,500 lbs

Equipped With:
Fanuc 11M CNC Control
Box Ways
CAT-50 Spindle Taper
32 Station, Belt Style, ATC
Chip Conveyor
Through Spindle Coolant
Spindle Chiller
1 Degree Indexing Table
9 Station Pallet Pool

詳細

1987 Toyoda FH-60 CNC Horizontal Machining Center With 9 Station Turret. Machine is in good condition and can be inspected under power as needed. Options include: Fanuc 11M control, CT 50 spindle, 32 position automatic toolchanger, chip conveyor, thru spindle coolant, spindle chiller, 9 station pallet pool. Please contact: Bob Nelson at 847-921-3845, Brian Foerster at 847-800-4494, and Cris Mulvihill at 602-501-8995 with any questions.

このモデルの詳細

の詳細について表示するには、 TOYODA FH-50レビュー、ブランド情報、写真、ビデオ、および多くを含むが、 ここをクリック