AMADA FO-3015NTレーザーカッター

ID:367286
ブランド:AMADA
モデル:FO-3015NT
タイプ:レーザーカッター
年:2007
売り主:販売者が誰であるかを見せて...
場所:Wisconsin
アメリカ合衆国
価格:

スペック

Lower:27
シート-W:60 "
シート-L:120 "
ワッテ-ジ:4000 w
IPM:3150 inpm
X-トラベル:121 "
Upper:47
Y-トラベル:61 "
Z-トラベル:7.87 "
重量:12 metric tons
管理:CNC (Amada AMNC NT)

4000 WATT AMADA GEMINI FO-3015NT CNC LASER CUTTER
Equipped with Automatic Nozzle changer
Manufactured in 2007, Installed in 2008
Approximate total hours are 45,500, New turbo installed at 40,769 hours
1.1 Motion Package
Travel Method: Stationary table, X, Y and Z-axis movement for cutting head
Control Method: X, Y and Z simultaneous 3 axis control
Drive Motors: Fanuc AC servo motors
Maximum Sheet Size: 61" (Y) x 122.8" (X)
Maximum Axis Travel: 61" (Y) x 122.8" (X) x 7.87" (Z)
Maximum Axis Positioning Speed: 3,150 inches per minute (80m/min) per axis (4,554 inches per minute 45o vector.
Maximum Speed Z-Axis: 2,362 inches per minute
Positioning Accuracy: 0.0004"/20"
Maximum Material Weight: 1,875 lbs.
Assist Gas: 4 ports with NC pressure Control
Machine Footprint: 385" x 107"
Machine Weight: 12 Metric Tons
Electrical Requirement: 208V, 3 Phase, 60Hz, 10KVA

1.2 CNC Controller
Model AMNC-F
Display: LCD Color Graphics Display
Control Function: X, Y, Z-Axis Simultaneous and Focus Lens B-axis, Adaptive Optic and Laser Power control (CW, Gated Pulse, Pierce Routines etc.).
Data Input Method: Touch screen, Keyboard, Ethernet, Wireless, CD, USB, 3 1/2" Floppy disk
Minimum Command Unit: 0.0001" (X, Y, Z)
Minimum Travel Unit: 0.0001" (X, Y, Z)
Standard Memory: 2 MB
Hard Drive: 10 GB
Operating Modes: Automatic and Manual
Display Modes: Program Contents, Position Information, Program Check, Settings, Parameters, Beam Diameter Compensation, Assist Gas Status, Self Diagnostics
Interlock Displays: Cooling Water Status, Gas Pressure Status, Vacuum Status, Turbo Blower Malfunction, Shutter Status, Beam Power, Resonator Discharge, Door Open, WACS.
Electrical requirements: See Motion Package

1.3 Laser Specifications AF 4000C Oscillator (Resonator):
CW Power: 4,000 Watts
Peak pulse power: 5,000 Watts
Maximum material thicknesses
Carbon steel: 0.75"
Stainless steel: 0.375" CleanCut (TM)
Aluminum: 0.375"

詳細

Installed in 2008 and manufactured in 2007 this Amada FO-3015NT laser cutting system is currently in an automated system and includes the optional automatic nozzle changer

このモデルの詳細

の詳細について表示するには、 AMADA FO-3015NTレビュー、ブランド情報、写真、ビデオ、および多くを含むが、 ここをクリック